• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][10.0][OneUI 2.5] Rise-Q v2.1 for A5 and A7 2017

Search This thread

azcest

Member
May 3, 2021
11
2
Hello, dear Simon. I must say that it is quite good, especially after the last update. There's an elevation in volume. It's a good thing Applock's here. And finally, I'd like to inform you that the AOD is not closed in our pockets. But long story short, I'm very pleased. I'm following you for new updates. Thank you again.
dear Simon, I've been using version 2.1 for over a week, and I'm very happy, but every once in a while, the phone turns itself off and on. Does this happen to other people? And what could be the reason for that? The phone's battery isn't too hot when it happens. Thank you again.
 
  • Like
Reactions: Simon1511

Simon1511

Recognized Developer
dear Simon, I've been using version 2.1 for over a week, and I'm very happy, but every once in a while, the phone turns itself off and on. Does this happen to other people? And what could be the reason for that? The phone's battery isn't too hot when it happens. Thank you again.
First time I hear of this issue. I can't reproduce it on my own phone as well.
 
  • Like
Reactions: azcest

Erfan1

Member
Mar 9, 2021
23
5
31
Hello serve your friends to reduce battery consumption to single-program settings, turn off the battery and data charge options in the background.
Apps:
Bat app : Allow Backgrond Activity = OFF
Data app: Allow backgrond data usage =OFF

Make these settings for all applications
 
Last edited:

Erfan1

Member
Mar 9, 2021
23
5
31
Of course, you can also put the programs in deep sleep mode and put the battery power mode in medium power mode to get better results.
 

azcest

Member
May 3, 2021
11
2
Hello everyone, I want to disable the physical keys located at the bottom of the phone after installing the rom, but I couldn't find a way to do it. is it necessary to re-install the rom in order to do this? There's no other way? I'd appreciate it if you'd answer me.
 
Hello everyone, I want to disable the physical keys located at the bottom of the phone after installing the rom, but I couldn't find a way to do it. is it necessary to re-install the rom in order to do this? There's no other way? I'd appreciate it if you'd answer me.
Hi! There are lot of button remapping apps at google playstore for example. You can try and use any you like more.
 
Last edited:
  • Like
Reactions: azcest

Erfan1

Member
Mar 9, 2021
23
5
31
Hello everyone, I want to disable the physical keys located at the bottom of the phone after installing the rom, but I couldn't find a way to do it. is it necessary to re-install the rom in order to do this? There's no other way? I'd appreciate it if you'd answer me.
 

Attachments

  • Screenshot_20210803-165129_Settings.jpg
    Screenshot_20210803-165129_Settings.jpg
    200.6 KB · Views: 52
  • Like
Reactions: azcest

azcest

Member
May 3, 2021
11
2
Dude, thank you. But I wanted to disable the physical keys directly. I took care of that, too, thanks to @poa_alpina. I downloaded that app and did it, just like he/she mentioned. "buttons remapper."
 

Erfan1

Member
Mar 9, 2021
23
5
31
Hi, I have 3 banking programs, only the fingerprint works well on one of them, but the other two, one of them, when I activate the fingerprint in the program, when I exit the program and log in again, the program asks me to adjust the effect settings. Re-activate the finger and this process continues. The wiki of banking programs also closes as soon as the fingerprint mode is selected to enter the program, in general, the pity of this ROM is that the banking programs do not respond properly.
 

progamerdrop

Member
Dec 5, 2020
5
2
Hi guy first I thank u this nice rom but I must say
this ussue when I playing game on game launcher fps is very nice first 2-5 minute but then fps is increasing serious low level. if I press apps button and again press game fps is fixing but again again again do this method very boring I hope u understand me sorry my bad english
 
Last edited:
  • Like
Reactions: timemaster377

gf7800

Senior Member
Dec 29, 2007
324
49
Tartus
Hello OP , I want to inform you
there are two minor bugs that I've discovered with v2.1 both are happening when the screen being off .

Edge lighting : not working when the screen is off, though it is working when the screen is on.

AOD : will not auto turn off when the phone is in my pocket.

Thanks, all the best .
 
Last edited:
  • Like
Reactions: azcest

Aman gee

Senior Member
Apr 28, 2016
197
44
34
Lahore
I cant using my phone bcs there always show "sim card changed" need to tap restart over and over
Here is soultion of sim card change :

Replace these 2 files attached below

1.CIDManager in priv-app
2.Xml file into permissions.

You will get rid of this problem forever .
Dont forgot to thanks.
 

Attachments

  • CIDManager.apk
    803.6 KB · Views: 10
  • privapp-permissions-com.samsung.android.cidmanager.xml
    1.4 KB · Views: 13

Rawezh Ali

Member
Jul 27, 2021
7
2
hello , i have done installing it for my friends A5 ,he was surprising , i told him we must thank the developers, they always brings new life to our phones, Thanks Mr simon ,and all who helped thank you ,but he said that when he calling ( noise canceling doesn't work !! ) please any fix for that ,, Thanks again for that great works....
 
  • Like
Reactions: Simon1511

Erfan1

Member
Mar 9, 2021
23
5
31
Hi and friends, especially from Simon 1511 Dear to make this beautiful rom, after using several time from this ram, to make the settings to reduce battery consumption, but still consuming the Budomman battery, I liked so quickly and the whole new facility, but the reason I said.
 
  • Like
Reactions: Simon1511

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    The smoothest custom ROM I ever experienced on this device. Thanks dude 😍
    2
    Hello again to everyone . I have said before that the phone turns itself off and on. After that, I did a clean install again, but that problem still persists. It suddenly restarts itself when there is no overheating problem. My device model is A7 2017. what do you think about this situation?
    Hello.....I have A7 2017 too...I use RiseQ rom now...but didn't face this problem...maybe trying to use rise kernel solve this problem.....just maybe i don't know..
    sorry for my bad english
    1
    I'm sure @Simon1511 is tired of getting messages about OneUI 3.1. He said he wouldn't do it, why do you still want it?
    Because people think that they're entitled to everything
    1
    How to fix my netflix with easy wayy😭, i cant understand that instruction came from reddit, i cant found file that should i download to flash via magisk, please help...
    Take a look at the workaround section in post #2, the module is linked there.
    1
    Description says "Secure Folder working". Secure Folder did not work nor even showed up in the homescreen/quick toggles after flashing the ROM. It's not working on Smalipatcher either. Any fix?
    Then you probably did something wrong.
    I (and other users) had no issues installing secure folder and setting it up.

    You may need to do a clean flash if coming from v2.0 or earlier (wipe system, data and cache and reinstall the rom). Also try to only select secure folder in Aroma and see if it then works. And yes, for somehow Secure Folder won't show up as icon in the app drawer, it'll be in Quick settings only after first boot.
  • 48
    rise-Q.png


    Disclaimer
    Code:
    I am NOT responsible for bricked devices, dead SD cards or any
    damage to you device.

    Features
    • OneUI 2.5 ported from official Galaxy Note10 Lite Q release (N770FXXS7CTL1)
    • January 2021 security patch
    • Kernel built from A720SKSU3CSH1 sources with Linux 3.18.140
    • Fully deodexed
    • De-knoxed and debloated
    • S9+ CSC
    • Aroma installer
    • Working Secure Folder

    Requirements
    • An A5 2017 or A7 2017 (A520F/-W/-K/-L/-S or A720F/-S)
    • Oreo bootloader and modem
    • TWRP/SHRP/OrangeFox recovery
    • Vendor partition is NOT required, but this ROM will work regardless of an existing vendor partition.
    • A brain

    Bugs
    • Fingerprint scanner doesn't work in most third-party apps such as banking apps due to outdated keystore

    Installation
    • Make a backup of your important data in case something goes wrong!
    • I highly recommend to wipe /system, /data and /cache before installation, especially if coming from stock ROM
    • Download the ROM from the download section below and copy the ROM's zip to your phone's internal storage or SD card
    • In recovery, select install and choose the ROM's zip
    • If not done before, you can make the choice to wipe /system, /data and /cache in the aroma installer
    • Make all your choices in the aroma installer and wait for it to finish the installation
    • Reboot your device and wait until it booted. NOTE: First boot can take up to 10 minutes!

    Downloads
    • See post #2

    Support

    Credits
    Thanks to...
    • Me, for all the time I spent on this project
    • @corsicanu and @ananjaser1211 for their magisk fix
    • Again @ananjaser1211 for his button light fix
    • @Option58 for updating and upstreaming our kernel to Linux 3.18.140
    • @Astrako for his countless fixes
    • @SuperR. for his android kitchen
    • @3arthur6 for his bluetooth library patch
    • All Telegram users who tested and helped me
    • Anyone else I missed

    Kernel source
    Github
    19
    Downloads
    Rise-Q v2.1: [03/07/2021]
    See downloads in Release post


    Rise-Q v2.0: [10/04/2021]
    See downloads in Release post
    Rise-Q v1.1: [18/01/2021]
    See downloads in Release post
    Rise-Q v1.0: [14/12/2020]
    Google Drive | OneDrive | Androidfilehost


    Changelogs
    -Fixed Secure Folder and made it an Aroma selection (You may need to enable it in Settings/QuickSettings first)
    -Switched to proper A720S hardware backed keystore and gatekeeper blobs
    -Patched SystemUI to get rid of the huge margin between the pin field and the bottom of the lockscreen when fingerprint + pin were set
    -Removed the fingerprint unlock animation used on N10 Lite firmware because it was freezing the phone sometimes when unlocking
    -Pulled ANT+ APKs from T720 Q and re-added them to aroma
    -Merged A600FN Q kernel wifi changes
    -Fixed a problem with wifi channels 10-13 not being shown in wifi menu by using wifi blobs from T720 Q
    -Added some missing WiFi kernel options
    -Reduced WiFi wakelocks by tweaking its config files
    -Reduced wakelocks in general with multiple kernel patches
    -Switched to newer composer 2.2 service and pulled more HWC blobs from A720S Pie
    -Binderized some graphics services
    -Improved sound quality and noise cancellation
    -Reverted experimental mic changes from v2.0
    -Fixed a wrong UUID for an audio effect
    -Fixed a typo in the CSC script that caused issues on dual-SIM devices
    -Enabled CPU bandwidth control in kernel as it's expected to be enabled
    -Re-added bluetooth patch for lasting device pairings which I forgot to the v2.0 update
    -Added missing bdaddr path for bluetooth
    -Fixed some small under-the-hood errors
    -Removed Face Recognition from settings as it's unsupported
    -Gathered a bit more space by removing unneeded stuff and replacing some apps with smaller apks
    -Added AppLock to aroma
    -Enabled function key menu for Bixby

    -Updated base ROM to N770FXXS7CTL1 (OneUI 2.5 from Galaxy Note10 Lite)
    -January security patch
    -Upstreamed the kernel to Linux 3.18.140 (thanks to @Option58)
    -Fixed changing volume in 3rd party apps (thanks to @ananjaser1211)
    -Fixed LiveFocus for rear camera
    -Fixed poor GPS signal
    -Fixed status bar icons being more centered than they should
    -Fixed button lights not being lit up when touching them
    -Fixed setting USB mode in notifications
    -Set device's fingerprint to G965F to bypass safetynet and show correct updates in Galaxy Store
    -Set 1.5GB SWAP/ZRAM space by default to improve overall performance
    -Switched back to Pie SSWAP blob due to Q one causing performance issues
    -Switched to A720S Pie power HAL for better power management
    -Enabled various vibration/haptic options in settings
    -Enabled high performance power mode in settings
    -Slightly boosted microphone for media
    -Switched to OMX from Galaxy S9 Q
    -Removed GoodLock from aroma due to region lock - Use patched GoodLock from corsicanu instead
    -Removed Honeyboard from aroma (already included in OneUI 2.5)
    -Removed ANT+ apps from aroma
    -Added 4G only network mode selection in aroma
    -Moved Flipboard to aroma
    -Moved Dictionary to aroma
    -Moved Bixby to aroma
    -Moved Edge Lighting to aroma
    -Edited the aroma splash "Rise-Q"-logo to match the logo of the XDA thread (and capitalized "Rise")

    -Updated base ROM to november firmware (A750FNXXU5CTK1)
    -Switched to J600FN audio HAL
    -Fixed moving apps to sdcard in settings
    -Fixed torch brightness crashing SystemUI/Cameraserver
    -Disabled unsupported secure WiFi option in settings
    -Updated rated charging speeds for A5/A7
    -Dropped dummy CSC folder in system (use /system/odm/etc/omc respectively /system_root/odm/etc/omc)
    -Fixed large shutdown animation
    -Fully killed vaultkeeper service
    -Switched to original A750FN RIL
    -Fixed missing Vulkan support
    -WiFi should be improved
    -Fixed neon case support
    -Added back video editor APK
    -Fixed screen on/off animation
    -Corrected some wrong values in power profiles
    -Added missing XID (Indonesian) CSC from S9+ firmware
    -The "SIM card changed" bug should be fixed
    -Fixed a bug where no CSC or a random CSC would be selected
    -Moved to setting default CSC to DBT if users' previous CSC is not supported
    -Added configurable kernel wakelocks (Changeable through e.g. hkTweaks)
    -Added a HACK that should block more apps from detecting magisk root (e.g. banking apps)
    -Added white bootanimation option in aroma
    -Added Samsung Honeyboard keyboard from OneUI 2.1/2.5 in aroma
    -Made Game Tools/Launcher optional by adding it in aroma
    -Updated included bloat to latest firmware
    -Updated disclaimer in aroma
    -Added selectable CSC features in aroma
    -Added GoodLock manager app in aroma

    -Initial release


    Workarounds
    NOTE for those who want/need to restore EFS backups:
    I created a GitHub repository that contains a flashable zip template that will allow you to restore previous EFS backups.
    DON'T FLASH THIS UNLESS YOU HAVE SERIOUS ISSUES LIKE
    • corrupted EFS partition
    • IMEI or any other EFS information being broken
    I am NOT responsible for any damage that may happen to your device!
    GitHub repo: See here and follow the steps provided.

    • ACG
    • ACR
    • AFG
    • AFR
    • ARO
    • ATO
    • ATT
    • AUT
    • BGL
    • BMC
    • BNG
    • BRI
    • BST
    • BWA
    • CAC
    • CAM
    • CAU
    • CCT
    • CHA
    • CHO
    • CHR
    • COO
    • DBT
    • DKR
    • ECT
    • EGY
    • EON
    • ESK
    • EUR
    • FMC
    • GCF
    • GLW
    • ILO
    • INS
    • ITV
    • KDO
    • KSA
    • KTC
    • LAO
    • LRA
    • LUC
    • LUX
    • MID
    • MTB
    • MWD
    • MXO
    • MYM
    • NEE
    • NPL
    • ORX
    • PAK
    • PEO
    • PHE
    • PHN
    • ROM
    • RWC
    • SEB
    • SEE
    • SEK
    • SKC
    • SKZ
    • SLK
    • SOL
    • SPC
    • SPR
    • TFN
    • THL
    • THR
    • TLS
    • TMB
    • TMK
    • TPA
    • TPH
    • TUN
    • TUR
    • USC
    • VMC
    • VMU
    • VTR
    • VZW
    • XAA
    • XAC
    • XAR
    • XAS
    • XEF
    • XEH
    • XEO
    • XEU
    • XEZ
    • XFE
    • XID
    • XME
    • XSG
    • XSP
    • XTC
    • XXV
    • ZTO
    • BTC
    • BTU
    • BVO
    • CEL
    • CPW
    • DOO
    • GLB
    • GTO
    • KOO
    • LYS
    • MAT
    • MM1
    • NZC
    • OPS
    • PCL
    • PTR
    • SER
    • SIN
    • SMA
    • SMP
    • STH
    • TEB
    • TEL
    • TKD
    • TMC
    • TNZ
    • UPO
    • UYO
    • VAU
    • VNZ
    • WTL
    • XFA
    • XNZ
    • XSA

    • Boot into recovery, mount /system and delete /system/priv-app/CIDManager folder through the recovery's file manager. (Note that the path may be /system/system/priv-app/CIDManager depending on the recovery used)

    • This mostly happens if you're rooted with Magisk because the system detects that you're rooted and denies DRM. To fix that, install this Magisk Module. Note that DRM will fall back to L3 which means that you won't be able to watch anything in HD.
    14
    UPDATE
    Rise-Q v2.1 is here!

    This is mainly a bugfix release, mostly small things (like removing the fingerprint unlock animation), but also some bigger ones. One of those fixes is Secure folder. I have finally been able to get it to work. To bypass issues with secure folder, I highly recommend to install Secure Folder only when doing a clean flash. I won't reply to bugreports from people who dirty flashed and have issues with it.
    Apart from that, I have seen multiple users report low media sound since v2.0. I compared the sound volume between v1.0, v1.1 and v2.0 and it sounded 100% identical for me. It may be an issue that comes from dirty flashing v2.0 on top of v1.1, so consider a clean flash first and tell me the exact steps to reproduce.

    Finally, as always for a new update, I recommend wiping your system partition before installation to bypass possible issues.

    Downloads
    Rise-Q v2.1: [07/03/2021]
    Google Drive | MEGA | Androidfilehost

    MD5: 06bf79a0ebea01d23b3166369d75ab3c

    Changelog
    -Fixed Secure Folder and made it an Aroma selection (You may need to enable it in Settings/QuickSettings first)
    -Switched to proper A720S hardware backed keystore and gatekeeper blobs
    -Patched SystemUI to get rid of the huge margin between the pin field and the bottom of the lockscreen when fingerprint + pin were set
    -Removed the fingerprint unlock animation used on N10 Lite firmware because it was freezing the phone sometimes when unlocking
    -Pulled ANT+ APKs from T720 Q and re-added them to aroma
    -Merged A600FN Q kernel wifi changes
    -Fixed a problem with wifi channels 10-13 not being shown in wifi menu by using wifi blobs from T720 Q
    -Added some missing WiFi kernel options
    -Reduced WiFi wakelocks by tweaking its config files
    -Reduced wakelocks in general with multiple kernel patches
    -Switched to newer composer 2.2 service and pulled more HWC blobs from A720S Pie
    -Binderized some graphics services
    -Improved sound quality and noise cancellation
    -Reverted experimental mic changes from v2.0
    -Fixed a wrong UUID for an audio effect
    -Fixed a typo in the CSC script that caused issues on dual-SIM devices
    -Enabled CPU bandwidth control in kernel as it's expected to be enabled
    -Re-added bluetooth patch for lasting device pairings which I forgot to the v2.0 update
    -Added missing bdaddr path for bluetooth
    -Fixed some small under-the-hood errors
    -Removed Face Recognition from settings as it's unsupported
    -Gathered a bit more space by removing unneeded stuff and replacing some apps with smaller apks
    -Added AppLock to aroma
    -Enabled function key menu for Bixby

    NOTE
    Also, before reporting bugs, check workarounds in post #2 first.
    In addition, I will NOT accept bug reports from those who dirty flashed over previous releases.
    14
    UPDATE
    Rise-Q v2.0 is here!

    At first, I want to thank @ananjaser1211 for his fixes and of course for answering all my stupid questions. Also thanks to @Option58 for upstreaming our kernel to Linux 3.18.140. Finally, huge thanks to all testers on Telegram for even finding the tiniest bugs.
    As this release of Rise-Q is now based on OneUI 2.5 from Galaxy Note 10 Lite, dirty flashing it over Rise-Q v1.0 or v1.1 will in most cases not work! It is highly recommended to wipe /data in recovery before installing Rise-Q v2.0.
    You can find downloads and the changelog of this release down below.

    Downloads
    Rise-Q v2.0: [04/10/2021]
    Google Drive | MEGA | Androidfilehost

    MD5: 3a582bbff799bc792fee7e73fc9e0f6c

    Changelog
    -Updated base ROM to N770FXXS7CTL1 (OneUI 2.5 from Galaxy Note10 Lite)
    -January security patch
    -Upstreamed the kernel to Linux 3.18.140 (thanks to @Option58)
    -Fixed changing volume in 3rd party apps (thanks to @ananjaser1211)
    -Fixed LiveFocus for rear camera
    -Fixed poor GPS signal
    -Fixed status bar icons being more centered than they should
    -Fixed button lights not being lit up when touching them
    -Fixed setting USB mode in notifications
    -Set device's fingerprint to G965F to bypass safetynet and show correct updates in Galaxy Store
    -Set 1.5GB SWAP/ZRAM space by default to improve overall performance
    -Switched back to Pie SSWAP blob due to Q one causing performance issues
    -Switched to A720S Pie power HAL for better power management
    -Enabled various vibration/haptic options in settings
    -Enabled high performance power mode in settings
    -Slightly boosted microphone for media
    -Switched to OMX from Galaxy S9 Q
    -Removed GoodLock from aroma due to region lock - Use patched GoodLock from corsicanu instead
    -Removed Honeyboard from aroma (already included in OneUI 2.5)
    -Removed ANT+ apps from aroma
    -Added 4G only network mode selection in aroma
    -Moved Flipboard to aroma
    -Moved Dictionary to aroma
    -Moved Bixby to aroma
    -Moved Edge Lighting to aroma
    -Edited the aroma splash "Rise-Q"-logo to match the logo of the XDA thread (and capitalized "Rise")

    NOTE
    Also, before reporting bugs, check workarounds in post #2 first.
    In addition, I will NOT accept bug reports from those who dirty flashed over previous releases.
    11
    GOD bless you MR.Simon1511;
    I hope to see android 11 ui3 for a520f Can I see?

    TANX Dear Friend
    Im gonna say this for once so everyone knows about it:
    Do NOT expect a OneUI 3 port from me. In my opinion, the added value between OneUI 2.5 and OneUI 3 is too low for the amount of work this would probably need.
    Apart from that, there would be 2 major problems:
    1. HWC
    2. Samsung Camera

    Our old Pie HWC has been working fine on Pie and Q, but on R Google decided to change HWC related stuff again which makes our Pie HWC incompatible to android 11. And yes, I know that HWC has been fixed on LineageOS 18 for our device, but the fix from there is likely not gonna work on OneUI. In short, this means for you: Broken HWC = very poor performance.
    Also samsung camera is gonna be a problem since all(?) newer samsung devices use a newer camera API that is simply incompatible to our "older" camera implementation.

    Note that these are just a few big bugs we know about so far, but there would probably be even more that would make a ROM based on that pretty much unusable in my opinion.

    So in conclusion: No OneUI 3 for our device(s).

    Apart from that, I want to thank everyone once again for all the bugs you found and reported and all your thankfulness!