getting the usual 30 Watt Max and around 25 Watt most of the time on my charger. So nothing changed there for meMy friends, are you charging properly? Version 3.5 is slow to charge, 3.4 version has fast charging, is the developer to protect battery life to set the slow charge?
And what settings in "when display" in lock screen section?
Wysłane z mojego Mi 9T Pro przy użyciu Tapatalka
My friends, are you charging properly? Version 3.5 is slow to charge, 3.4 version has fast charging, is the developer to protect battery life to set the slow charge?
Same here my 27W charger is showing 33.6W charging but only 2800mAh on previous update it showed 3300mAh
You can't on default pixel launcher
getting the usual 30 Watt Max and around 25 Watt most of the time on my charger. So nothing changed there for me
adb logcat -dHi,
My phone is a Mi 9T pro that came with MiUI 11.03 EEA version. Now I have OrangeFox 10.8 with Magisk 20.1 and latest ROM build Evolution X 3.5 20191225.
I am new to this stuff so I don't know exactly where to find such logcats. All I know is that after making a clean install of everything, FP is not working properly, no matter how many times I registered the same finger
I would present these logcats if I knew where to find them
what kind of charger do you use? And how did you measure? Just with the onscreen info or did you also use some tool like Ampere to verify?Thank you for your reply, I only use 3.4 version, 3.5 version charging only 500ma,
Anyone knows how to turn off the front camera pop up sound effect?
what kind of charger do you use? And how did you measure? Just with the onscreen info or did you also use some tool like Ampere to verify?
I just plugged my phone into my Anker Wallcharger in the QC 3.0 Port. Reads 2000mA with 12V, so 24W charging speed as usual. I'm on latest 3.5 without any mods installed except for Magisk.
[edit] also be sure that you compare with the same level of battery left on the device. Charging the first 50% of the battery usually goes way faster than the remaining. So if you only get 500mA when charging from 85% to 95%, it's perfectly normal. But from let's say 20% to 50% should be way faster
perhaps flash latest immensity kernel? Otherwise i'm out of options.Thank you for your reply, the same charger, 3.4 version of the charging phone shows 2800ma, 3.5 version 500ma sometimes also shows 100ma, charging super slow! I've tested it many times again and again and again and still do it!
/*
* Your warranty is void. Or vaild, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
You guys have to thank @Az Biker for giving me a renewed confidence in providing further updates for the community. Since I've been re-assured the mods have my back, I'll assure them I'll continue on developing Evo for our device!* * * Thread Cleaned * * *
First off, thank you @joeyhuab for your hard, free work, for your continued contribution where you choose to develop, and for all you do for Xda.
tl;dr
stop the disrespect towards devs and their work
learn to build your own Rom, or find one you like
keep your rude, disrespectful opinions off Xda
show the devs a little respect and gratitude for all they do for Xda
if your comment isn;t helpful or respectful don't post it
continue to violate the rules and your account will be reviewed for restriction or removal