[ROM][10.0][UNOFFICIAL] LineageOS 17.1 for Mix 3 5G [andromeda]

Android-Desire

Senior Member
Sep 17, 2010
253
36
48
Copenhagen
This problem with false positives happens on stock ROMs as well. When I owned a Zuk Z1, loads of apps thought the stock ZUI was a rooted custom ROM. Not a lot can be done about it because each app uses it's own detection method and the companies that make these apps obviously aren't going to broadcast the detection methods they use.

You may have success running these apps by actually rooting your phone and using Magisk Hide on the apps that don't work.
Any news on this? Banking apps working now? Maybe getting this phone and i wanna know if banking apps work on custom rom.
 

Inkypen

Senior Member
Aug 19, 2018
394
1,252
103
London
Any news on this? Banking apps working now? Maybe getting this phone and i wanna know if banking apps work on custom rom.
Depends on the bank. Some work and some don't. I can't speak for banks around the world, but I use 3 UK banks and this is my experience:
Natwest bank works fine. whether rooted or not.
Barclays bank works fine if I root and use Magisk Hide.
Metro bank doesn't work at all, rooted or not. Doesn't matter, I can just use the web based version instead.

Your mileage will vary of course. Going forward, if Google do roll out full hardware based safety net attestation then it's likely that no banking app will work on any custom ROM. https://www.xda-developers.com/safetynet-hardware-attestation-hide-root-magisk/
 
  • Like
Reactions: Android-Desire

incognico

Senior Member
Oct 18, 2010
127
24
0
Tried to flash the latest july 10th build over the june 30th one (that one was clean flashed due to enabled encryption) but it will just boot into recovery after a while on the los boot screen. Flashed over the older one and it works again. Any ideas how to upgrade to the latest build? I use magisk and it keeps force encrypt so theoretically it should be fine :/
 

Inkypen

Senior Member
Aug 19, 2018
394
1,252
103
London
Tried to flash the latest july 10th build over the june 30th one (that one was clean flashed due to enabled encryption) but it will just boot into recovery after a while on the los boot screen. Flashed over the older one and it works again. Any ideas how to upgrade to the latest build? I use magisk and it keeps force encrypt so theoretically it should be fine :/
I had some feedback that there is something wrong with this build, so I've taken it down while I investigate. Will update the thread a bit later.
 
  • Like
Reactions: c1-p8

m4r0v3r

Senior Member
Jan 27, 2011
377
120
0
with instructions, if you nuke the system and vendor partition, then format data you need to reboot into recovery, the device hangs because theres no system OS. Is that normal?
 

Amnesisq

New member
Jul 17, 2020
1
0
0
with instructions, if you nuke the system and vendor partition, then format data you need to reboot into recovery, the device hangs because theres no system OS. Is that normal?
I had the same problem @m4r0v3r. I sorted it out using adb push.

After formatting everything according to the instruction, instead of restarting the phone without any system, just connect it to the computer. Run adb demon and check if you have connectivity with the phone.

If you do, then use
Code:
adb push rom_name /sdcard
and it should transfer it to the phone.

Please check if that solution works for you and if it is, I will ask the thread owner to kindly add this solution to the instructions
 

piovendder

Member
Sep 25, 2010
34
9
28
Thanks for porting this ROM, works really well.

I can't get the search button (the physical button to the left) to work, does not map to any functions. Anyone got it to work?
 
Last edited:

Inkypen

Senior Member
Aug 19, 2018
394
1,252
103
London
Thanks for porting this ROM, works really well.

I can't get the search button (the physical button to the left) to work, does not map to any functions. Anyone got it to work?
The remap function doesn't work correctly. You can remap short press but not long press, so until I figure out how to fix it properly it's set to the default which is short press for search and long press for assistant.
 
  • Like
Reactions: piovendder

m4r0v3r

Senior Member
Jan 27, 2011
377
120
0
I had the same problem @m4r0v3r. I sorted it out using adb push.

After formatting everything according to the instruction, instead of restarting the phone without any system, just connect it to the computer. Run adb demon and check if you have connectivity with the phone.

If you do, then use
Code:
adb push rom_name /sdcard
and it should transfer it to the phone.

Please check if that solution works for you and if it is, I will ask the thread owner to kindly add this solution to the instructions
i remember trying this with no luck. but i cant actually remember what issue presented afterwards. ive bought another mi mix 3 5g so will see if i can setup lineage on that when I receive it.
 

piovendder

Member
Sep 25, 2010
34
9
28
The remap function doesn't work correctly. You can remap short press but not long press, so until I figure out how to fix it properly it's set to the default which is short press for search and long press for assistant.
how to remap the short press? tried thru settings but doesn't work, the default short/long presses not working for me neither. What I've noticed is when I pull down the notification menu then short press the notification menu slides back up.
 

giannis008

Member
Mar 22, 2019
18
0
1
HI guys
I'm thinking of buying mi mix 3 5g but i have some questions about this rom since it might never get an official update on android 10
1) is everything working?
2) how is battery life?
3) do mi mix 3 4g mods work in the 5g version (especially higher refresh rate and stereo speaker mod)?
4) is there any way to get miui's second space?
 

piovendder

Member
Sep 25, 2010
34
9
28
HI guys
I'm thinking of buying mi mix 3 5g but i have some questions about this rom since it might never get an official update on android 10
1) is everything working?
2) how is battery life?
3) do mi mix 3 4g mods work in the 5g version (especially higher refresh rate and stereo speaker mod)?
4) is there any way to get miui's second space?
1) only thing not working for me is the physical button to the left, which is normally used for google speech.
2) quite good, I'll attach one of my battery usage pics
3) there's a thread on this somewhere
4) don't know what this means
 

Attachments

Last edited:

Beryus123

New member
Aug 3, 2020
1
0
0
I got no problem with headphones here.

Stock LineageOS Snap camera can't do 60fps or 4k recording. There are plenty of camera apps on the play store that have these options.
If you want to use GCam then this port is the most compatible with andromeda, it can do 1080p/60fps and 4k/30fps video recording.
This GCam port does not work with selfie camera at all, you must use the built in Snap cam for that. My suggestion would be to set the slider to open the default camera app and to have have GCam on your home screen.
Hey guys,
is there an camera-app that can do 4k/60fps-video-recordering while on a custom-rom or do i have to stay on stock-rom for that?

Thanks!

EDIT: Or is it possible to extract the apk of the stock-camera-app to be able to install it on any custom-rom? I just want to keep the 4k/60fps-video-recording-functionality.

EDIT2: Or ist there an ANXCamera-Version that works on andromeda? because andromeda is not in the supported device list of ANX.
 
Last edited:

Inkypen

Senior Member
Aug 19, 2018
394
1,252
103
London
Hey guys,
is there an camera-app that can do 4k/60fps-video-recordering while on a custom-rom or do i have to stay on stock-rom for that?

Thanks!

EDIT: Or is it possible to extract the apk of the stock-camera-app to be able to install it on any custom-rom? I just want to keep the 4k/60fps-video-recording-functionality.
In my latest test builds I managed to get 4k/30fps recording working in the lineageos camera app. I've used an app from the playstore called Cinema4K which does 4k/60fps but it is a paid app. Some users have suggested installing ANX camera with the 48mp fix, in case you weren't aware ANX camera is MIUI camera ported to AOSP.