[ROM][10.0_r37][OFFICIAL] Evolution X 4.7 [JUDYLN][12/10/2020]

DanDC

Member
Mar 11, 2018
15
0
1
Hello,

I have a LMG710EM with v30f-EUR-xxx (android 10), unlocked.
I try to install TWRP or OrangeFoxRecovery or skyhawk (same for me, objective : to have one working ...)

As I understand, as some others, I'm stuck during the process
fastboot flash recovery recovery.img (OrangeFoxRecovery) with
"FAILED (remote: Cannot flash this partition in unlocked state)".

I tried already the solutions I found into current thread for such problem without success
(but not sure to have the good TWRP, I followed different threads to find what I hoop to be last ones valid).
Tried :
fastboot flash boot_a twrp.img
fastboot flash boot_b twrp.img
(same with twrp_universal.img)
Result : Phone reboots and stucks on LG G7 Thinq logo.

Can someone, please, say me :
* do I have the good pre-requisite ?
* what TWRP or OrangeFox Recovery or skyhawk is working on such LG G7 with such androitd 10 version :
where can I have it and a description "how-to" install it ?
* I have seen that I can take a look on Telegram (but Telegram is new stuff for me) to download, have information : is it relevant ?
(if yes then can I have a link where to go ?)

Remark : I have seen reference, into current thread, to a TWRP_universal but I don't find (or I missed) where to download it.
Already thanks for your upcoming help.
 

sinkoo1979

Senior Member
Oct 29, 2016
604
91
28
Yigo
Hello,

I have a LMG710EM with v30f-EUR-xxx (android 10), unlocked.
I try to install TWRP or OrangeFoxRecovery or skyhawk (same for me, objective : to have one working ...)

As I understand, as some others, I'm stuck during the process
fastboot flash recovery recovery.img (OrangeFoxRecovery) with
"FAILED (remote: Cannot flash this partition in unlocked state)".

I tried already the solutions I found into current thread for such problem without success
(but not sure to have the good TWRP, I followed different threads to find what I hoop to be last ones valid).
Tried :
fastboot flash boot_a twrp.img
fastboot flash boot_b twrp.img
(same with twrp_universal.img)
Result : Phone reboots and stucks on LG G7 Thinq logo.

Can someone, please, say me :
* do I have the good pre-requisite ?
* what TWRP or OrangeFox Recovery or skyhawk is working on such LG G7 with such androitd 10 version :
where can I have it and a description "how-to" install it ?
* I have seen that I can take a look on Telegram (but Telegram is new stuff for me) to download, have information : is it relevant ?
(if yes then can I have a link where to go ?)

Remark : I have seen reference, into current thread, to a TWRP_universal but I don't find (or I missed) where to download it.
Already thanks for your upcoming help.
Try fastboot flash boot_a recovery.img
fastboot flash boot_b recovery.img with orange fox recovery
unzip the orange fox zip first
 

DanDC

Member
Mar 11, 2018
15
0
1
Try fastboot flash boot_a recovery.img
fastboot flash boot_b recovery.img with orange fox recovery
unzip the orange fox zip first
First, thx for the answer !
One step forward done :) :
NO message anymore of "... Cannot flash this partition in unlocked state ".

Here under result :
RECOVERY_OrangeFoxRecovery2.png

(I used the recovery.img of OrangeFoxRecovery found on Telegram channel "OrangeFox Recovery Updates", named :
OrangeFox-R11.0_1.2-Stable-judyln.zip, is it the good one to use ?)

BUT I cannot go into recovery mode.
Tried :
* turn off the phone,
* hold volume - and power button until I see the LG logo
(I see the logo after the warning message of "Unlock phone")
* then continued holding volume -
* and start spamming the power button

Result :
phone continues the boot process and stay hanging on "LG Life's Good" logo.

Fortunaltely :
after some stress ;-) , I can go into download mode
* with the usb connected
* restarting the phone with hold on : power + volume- + volume+
* then when it restarts only volume+

And after that reset the latest version of the software with "LG Bridge"

Please, anyone succeeded to install a
OrangeFoxRecovery or TWRP or skyhawk
on this latest official version of LG ROM (G710EM30f : v30f-EUR-xxx (android 10), unlocked) ?

(I didn't yet test the installation of skyhawk - not yet search/found how to do it for my LG G7)
 

sinkoo1979

Senior Member
Oct 29, 2016
604
91
28
Yigo
First, thx for the answer !
One step forward done :) :
NO message anymore of "... Cannot flash this partition in unlocked state ".

Here under result :
View attachment 5178441
(I used the recovery.img of OrangeFoxRecovery found on Telegram channel "OrangeFox Recovery Updates", named :
OrangeFox-R11.0_1.2-Stable-judyln.zip, is it the good one to use ?)

BUT I cannot go into recovery mode.
Tried :
* turn off the phone,
* hold volume - and power button until I see the LG logo
(I see the logo after the warning message of "Unlock phone")
* then continued holding volume -
* and start spamming the power button

Result :
phone continues the boot process and stay hanging on "LG Life's Good" logo.

Fortunaltely :
after some stress ;-) , I can go into download mode
* with the usb connected
* restarting the phone with hold on : power + volume- + volume+
* then when it restarts only volume+

And after that reset the latest version of the software with "LG Bridge"

Please, anyone succeeded to install a
OrangeFoxRecovery or TWRP or skyhawk
on this latest official version of LG ROM (G710EM30f : v30f-EUR-xxx (android 10), unlocked) ?

(I didn't yet test the installation of skyhawk - not yet search/found how to do it for my LG G7)
Hold volume down and power button wait for lg logo and spam the power button while holding volume down. Don't let it get to the unlocked bootloader phase of booting.
 
Last edited:

DanDC

Member
Mar 11, 2018
15
0
1
When you hold volume down and power button wait for lg logo and spam the power button while holding volume down. Don't let it get to the unlocked bootloader phase of booting.

Ok I succeeded :),
it's quite challing to do it just when logo "LG G7 Thinq" appears and BEFORE that "unlock warning screen" appears

... BUT now, "next problem", it didn't go to the OrangeFoxRecovery screen but well on the traditional LG "Factory data reset" screen

But who don't try ....and I tried : wipe everything (twice answer)
AND tadaaaaaaa : OrangeFox Recovery appeared !!!!

THX ! THX ! THX !
(I hope that my "adventure" will help some others)

And I like this Easter Egg on the "Build number", very funny :)

Additional question : can I flash FULL OrangeFoxRecovery ZIP (with OrangeFox Recovery) without problem ?
(and afterwards flash Magisk ZIP)
 

sinkoo1979

Senior Member
Oct 29, 2016
604
91
28
Yigo
Ok I succeeded :),
it's quite challing to do it just when logo "LG G7 Thinq" appears and BEFORE that "unlock warning screen" appears

... BUT now, "next problem", it didn't go to the OrangeFoxRecovery screen but well on the traditional LG "Factory data reset" screen

But who don't try ....and I tried : wipe everything (twice answer)
AND tadaaaaaaa : OrangeFox Recovery appeared !!!!

THX ! THX ! THX !
(I hope that my "adventure" will help some others)

And I like this Easter Egg on the "Build number", very funny :)

Additional question : can I flash FULL OrangeFoxRecovery ZIP (with OrangeFox Recovery) without problem ?
(and afterwards flash Magisk ZIP)
yes you can flash orangefox zip in recovery without problem. I tried to flash magisk but didn't work.
 

DanDC

Member
Mar 11, 2018
15
0
1
yes you can flash orangefox zip in recovery without problem. I tried to flash magisk but didn't work.
Thanks again.

Now I'm able to use Magisk too.

In this order, I :
* added MagiskManager-v8.0.0 (apk)
* download (zip) Magisk 20.4
* renamed the package to something else
* installed the Magisk 20.4 zip with OrangeFoxRecovery (reboot system)
* activated in MagiskManager the MagiskHide
* choosen in MagiskManager (bottom "Shield icon") the applications to hide (fi my Bank application, LG ThinQ)

My Bank application is yet detecting the root (giving me a "root message warning") and works
but refuse to use the fingerprint (that I don't want to use with my Bank application).
Titanium backup is working (tested backup/restore).
LG ThinQ is working too (just to test that hide is working, without hide then this application refuse to work ; I 'm not using it)

Remark :
SafetyNet succeeded too (Eval type BASIC - I don't know what it means).

Maybe, later, I will test the Magisk 21
(but not sure that it's already existing for judelyn and that it will be compatible with current Evolution ROM 4.7)

If it helps you...
 

DanDC

Member
Mar 11, 2018
15
0
1
I heard that this rom play game very hot and the battery drains fast.
is it true? o_O
Many thanks.
I'm using this ROM since 3 days (so, not long experience) and with no games :
* no overheating problem
* no excessive battery drain (not more than with the STOCK ROM)
BUT naturally, it's difficult to answer to these questions : use of one is not use of an another ....
 

DanDC

Member
Mar 11, 2018
15
0
1
After 3 days of usage :
ROM is very good except that I have yet a very annoying problem :
I cannot use fully my phone because I cannot phone anymore ...

I'm able to initiate a voice call : receiver answers BUT she/he cannot hear me speaking and I cannot hear her/him.
(call is thus well occuring but for nothing).
FYI : I'm in Europe using GSM network and 4G/LTE is working fine.

If I use What'sApp or Messenger then +/- same problem with voice/video call :
* I can see/listen my contact,
* my contact can see me BUT
* my contact cannot listen me (receives no sound).

If I use the recorder application, I can use it totally normally (I can listen me when recording is finished).

I found on Telegram a MICRO fix zip : installed from OrangeFoxRecovery (it detects it as a Magisk addon - I cannot install it from MagiskManager application because it stays "grey" : not usable) : this solves NOT the problem.
(it was just to try because I don't thing that it's a MICRO problem).

I checked the authorization on the MICRO for each of these applications, nothing special : access granted.

Please, any help/idea ?
(unfortunatly, without a solution, I will have to go back to STOCK ROM)
 

DanDC

Member
Mar 11, 2018
15
0
1
After 3 days of usage :
ROM is very good except that I have yet a very annoying problem :
I cannot use fully my phone because I cannot phone anymore ...

I'm able to initiate a voice call : receiver answers BUT she/he cannot hear me speaking and I cannot hear her/him.
(call is thus well occuring but for nothing).
FYI : I'm in Europe using GSM network and 4G/LTE is working fine.

If I use What'sApp or Messenger then +/- same problem with voice/video call :
* I can see/listen my contact,
* my contact can see me BUT
* my contact cannot listen me (receives no sound).

If I use the recorder application, I can use it totally normally (I can listen me when recording is finished).

I found on Telegram a MICRO fix zip : installed from OrangeFoxRecovery (it detects it as a Magisk addon - I cannot install it from MagiskManager application because it stays "grey" : not usable) : this solves NOT the problem.
(it was just to try because I don't thing that it's a MICRO problem).

I checked the authorization on the MICRO for each of these applications, nothing special : access granted.

Please, any help/idea ?
(unfortunatly, without a solution, I will have to go back to STOCK ROM)
OK no answer, no idea, no solution, ... snif.
I upgraded the phone to Revolution X 5.2 (Android 11) : problem persists.

Question : could it be that the "vendor.img" can solve this sort of problem ?
And if yes then what "vendor.img" can I use (and where can I download it for my LMG710EM) ?
Please ...
 

GiaiPhapAndroid

Senior Member
Apr 15, 2011
142
131
63
Ho Chi Minh
OK no answer, no idea, no solution, ... snif.
I upgraded the phone to Revolution X 5.2 (Android 11) : problem persists.

Question : could it be that the "vendor.img" can solve this sort of problem ?
And if yes then what "vendor.img" can I use (and where can I download it for my LMG710EM) ?
Please ...
LG G710em Android 10 when you flash Evolution X 4.7 or 5.2 micro call will not work, it must be flash from Korea or Canada Android 10
 

Ning16th3

New member
Jan 20, 2021
2
0
11
I has problem with auto brightness. It change very fast and make me uncomfortable. How to get default auto brightness like normal?
Sorry my english not good.
 

sinkoo1979

Senior Member
Oct 29, 2016
604
91
28
Yigo
Everything looks good on 1/28/2021 5.3 build except can't connect to wifi.
Also, recovery boots into lineage recovery.

Update: Everything working on the latest build except can't flash magisk for root. Still booting to lineage recovery. Will try to manually flash orangefox. Orangefox will not boot, have to format userdata on fastboot to boot into orangefox.

What doesn't work:
MTP
No data
phone calls work but can't hear the other side

Install steps:
flash orangefox to both slots.
format data
flash rom
flash orangefox zip
wipe data and cache
reboot
(optional)
reboot to recovery and flash magisk.
 
Last edited: