[ROM][10/12] LineageOS OFFICIAL [SURYA]KARNA]

Search This thread

vcarbajo

Senior Member
Feb 26, 2011
52
4
Wich firmware is the correct/best for the last build 2022/08/22?
V12.5.8.0.RJGMIXM or V13.0.1.0.SJGMIXM
 

poltak11

Senior Member
Feb 11, 2011
78
25
Melbourne
I'm getting a bootloop after flashing the latest nightly, 20220829, which results in a reboot into the LineageOS recovery (had TWRP installed previously). I was coming from nightly 20220620

Any idea what could be the issue there?
At the end of the install log, there was an error about magisk. "Magisk addon.d failed", likely as my recovery didn't decrypt /sdcard. I'm not sure if that would cause a bootloop though. There was further output after that which looked succuesful, so I assume the Magisk error wasn't a big issue
I also wiped cache/dalivk post-flash
 

gardiol

Senior Member
Feb 23, 2011
897
1,149
San Carlo Canavese
photos.gardiol.org
I'm getting a bootloop after flashing the latest nightly, 20220829, which results in a reboot into the LineageOS recovery (had TWRP installed previously). I was coming from nightly 20220620

Any idea what could be the issue there?
At the end of the install log, there was an error about magisk. "Magisk addon.d failed", likely as my recovery didn't decrypt /sdcard. I'm not sure if that would cause a bootloop though. There was further output after that which looked succuesful, so I assume the Magisk error wasn't a big issue
I also wiped cache/dalivk post-flash

Indeed a decrypt issue.
Since you are using TWRP, did you upgrade your TWRP to one that can decrypt A12? Are you using DFE decryption? Many things can go qrong here.

Indeed the addon.d issue is telling... Can you see your files on internal memory from twrp? I would upgrade TWRP or use LineageOS recovery and then try flash again.

You might be out of luck anyway and need a full clean flash at this point.

But indeed upgrade to latest available TWRP or use Lineage recovery.
 

poltak11

Senior Member
Feb 11, 2011
78
25
Melbourne
Thanks for your reply! I'm using TWRP 3.5.0 by mahajant99, which claims description works, though unclear whether it supports A12 or whether I'm using DFE decryption. I haven't done much android device tinkering in years. Files in /sdcard are definitely encrypted in TWRP - names are all obfuscated.

Let me know if I'm using a recovery that doesn't support LOS. Else I'll try Lineage recovery or, if I've messed something up earlier with the decryption, I'll do a clean flash.
 

helcaraxë

Member
Jun 4, 2022
7
3
@gardiol I have a problem (bug?) with the notification sound level.
I have the ringtone volume at 0 (3rd setting in "audio"), and when my phone starts, the notification volume level (5th setting) is always 0. If I change it, it reverts to 0 when I go back to the settings page or reboot the phone.
If however I set the ringtone volume to any value > 0 then it lets me change the notification volume.
 
  • Like
Reactions: _exian_

helcaraxë

Member
Jun 4, 2022
7
3
They're not linked. Can somebody try to set their volume level for "ringtones and notifications" to 0 and then try to change the notification level below?
 

poltak11

Senior Member
Feb 11, 2011
78
25
Melbourne
Get this twrp Here
I guess at this point you must cleab flash. Dont use dfe anymore.
twrp you have is ancient at this time, update, and Its clearly the cause of your issues.
Thanks for your help. I've done a clean flash of LOS with that recovery and things seem to be better now. Now, each time I reboot into recovery, I get prompted for my unlock code and it successfully decrypts /sdcard.
As a casual phone tinkerer, I didn't realize my TWRP was so old. It was the main one that had its own thread here on XDA. Maybe it would be good to link the newer TWRP required for LOS in the OP here?
 

gardiol

Senior Member
Feb 23, 2011
897
1,149
San Carlo Canavese
photos.gardiol.org
Thanks for your help. I've done a clean flash of LOS with that recovery and things seem to be better now. Now, each time I reboot into recovery, I get prompted for my unlock code and it successfully decrypts /sdcard.
As a casual phone tinkerer, I didn't realize my TWRP was so old. It was the main one that had its own thread here on XDA. Maybe it would be good to link the newer TWRP required for LOS in the OP here?

TWRP is not recomended, i only recomend LineageOS recovery and i don't whish to link to unofficial builds from Telegram too much, so i will not link it to OP.

Unfortunately XDA is pretty much dead for Surya, and it has been for quite a long time. Everything goes on on Telegram and that sucks. I try to keep this thread alive as much as i can because i am an old-timer and i think that XDA, while far from perfect, is better than a "chat" app for these things. But indeed its a fact that most stuff only goes on there and only there you can find updated stuff.

On the TG support group there is a lot of daily traffic, while here maybe one or two posts per day, but less than a dozen every two weeks. Also most of the other threads suffer the same faith. I do my best to reply here, but the limit to post TG links and the difficulty in uploading files directly (and i don't like to add another different external storage for the same files) makes difficult sometimes.

What would be needed is a safe long-time storage for files and builds linked with a good XDA style forums board website. Sadly, both XDA and TG lacks either one of them.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    anybody using this rom with dual sims? can you enable/disable each one independently?
    Yes it is possible.
    1
    ...

    Can you post your xml? I'm using BSG_ONE_PV4.xml, which used to work for all lenses.

    Maybe something that changed in the firmware when I updated to MIUI 13? Which firmware are you using?
    The XML is attached.

    About firmware: I did not update to MIUI 13, and now I use the official LOS 19.1 (Nov. 14).
    1
    Earlier today I couldn't receive or make calls -- the phone would soft reset -- so I decided to go to TWRP and do a cache wipe... and BAM! Phone was fully reset
    Never happened here with LOS Recovery (not rooted anyway)
    Did this happen before or after updating Bromite webview?
  • 67
    Lineage_OS_Logo.png


    LineageOS 19.1 Official and currently built by LineageOS official infrastructure.


    17.1 has never been official (and it's upstream dead since 31st December 2021)
    18.1 is official, discontinued builds since 2nd May 2022
    19.1 is official and built weekly.

    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */

    What's working:
    • Everything

    Known issues:
    • Honestly at this time, nothing?

    Camera Notes
    ANX camera is not recomended and will most probably NOT work.
    To get a fully working camera try one of the gcams here.
    Do not forget to copy&load the associated xml file!

    Official LOS uses oss camera service, so xml written for other custom roms might not work.
    The gcams at the above link have modified xmls for LOS.


    Download:

    There is also a MIcroG build if you don't like Google Apps!
    If you care for official microg builds, check here they will be ready when they will be ready, those builds are not done by me nor supported by me, do not ask me about it.

    There is also, for help and support, the:
    Instructions:
    • Make sure to flash at the very minimum firmware 12.5.7.0 (anything newer will work) from XiaomiFirmwareUpdater firmware page
    • (For 17.1 <<only>> : flash VENDOR + FIRMWARE from Android 10, do not use Android 11)
    • Download this build and Magisk (optionally) and gapps (optionally).
    • Put the zip on your MicroSD (suggested) or connect via USB to PC.
    • Boot to recovery (latest TWRP only is suggested! OrangeFox has issues).
    • Wipe Dalvik, Cache and format data. This IS NOT OPTIONAL!
    • Reboot recovery after wipe and format.
    • Flash this ROM zip...
    • ... flash gapps zip ...
    • ... If you want Magisk, flash zip ...
    • Reboot and enjoy!
    If you have any issues flashing, like persistent GApps or booting issues, try to cleanup the phone with the following procedure:
    • Download a full MIUI rom recovery package from XiaomiFirmwareUpdater MIUI page
    • ... (make sure you download the full rom package for RECOVERY, it is about 2.4Gb!) ...
    • From recovery, flash the zip file. This will cleanup all the partitions.
    • Now flash again this ROM.
    This problem is related to the fact that TWRP and OrangeFox both don't support dynamic partitions properly yet.

    Tested with Magisk 25.2, newer version should work, but you MUST follow the SafetyNet fix guide in the next post if you want Play Store certification.

    Suggested GAPPS for LineageOS: Mind The Gaps (here, make sure to download the ones for your android version 10, 11 or 12).



    XDA DevDB Information
    LineageOS 17.1 & 18.1 & 19.1, ROM for the Xiaomi Poco X3 NFC

    Contributors

    Build by @gardiol

    Device tree sources: device tree
    Kernel sources: kernel
    Vendor sources: vendor

    Additional notes

    SafetyNet does not pass by default, you need to follow the steps on post n.3 below. This is due to Google issues and LOS rules.

    ROM OS Version: Android 10 & 11 & 11
    ROM Kernel: Linux 4.x

    Version Information
    Status:
    Official and Unofficial.

    Created 2020-12-13
    Last Updated 2022-08-24
    19
    Changelog

    From May 2022:
    LineageOS 19.1 is official for Surya!

    TO BE CLEAR: there are OFFICIAL releases weekly, those (and the according changelog) is NOT listed here, go to official LOS download page! This list if only for test builds at this point.

    20 December 2021 (17.1)
    Last 17.1 build ever for Surya
    December security patches

    19 September 2021 (17.1)
    September security patches.

    06 September 2021 (18.1)
    New debloated kernel
    Fixed screen recorder rate limiter
    Fixed DriveDroid (and more usb gadget stuff)
    Added proximy check to prevent screen wakeup option
    August patches
    Fixed minor denials (battery improvement)

    31 July 2021 (18.1)
    Fixed lots of denials
    Greatly improved battery life
    more minor fixes.

    20 July 2021 (both 17.1 and 18.1)
    July patches
    For 18.1: mi_thermald added back
    For 18.1: dynamic 30-120Hz fixed

    13 July 2021 (18.1)
    All new trees!
    FORMAT data is MANDATORY

    19 June 2021 (17.1)
    Upstream sync
    June patches

    17 June 2021 (18.1)
    fixed haptic issues
    Fixed Netflix error 5.10
    Fixed idle drain
    Fixed NFC denial
    Upstream sync

    07 June 2021 (18.1)
    Fix aptX
    Fix boot from MIUI to LOS not working

    07 June 2021 (18.1)
    Fix netflix
    Fic video recording length
    Fix GBoard rounded corners

    05 June 2021 (18.1)
    First release of 18.1 build!

    11 May 2021 (17.1)
    LOS upstream sync with May patches

    18 April 2021
    LOS upstream sync with April patches
    Dpmd crash resolved
    ️LOS call recorder enabled
    ️Removed all permissive domains

    09 April 2021
    Upstream sources sync

    28/29 March 2021
    Fixed video recording bug
    Fixed audio crackling (finally!)
    Removed all "parts", added doze and refresh rate specific settings
    Getting trees ready for official
    (note: UnofficlalBuild and Experimental builds are from 28 March, MicroG from 29th)

    13 March 2021
    Two builds are available...
    Unofficial, the same old build, but with March security patches.
    Experimental, featuring a full vendor partition, but still SELinux permissive, but a ton of improvements including fixed video recording length, 4K video recording and playback and more minor issues.
    Pick your choice!

    27 February 2021
    Really fixed yellow tint once for all
    Enabled VoIP transition
    Updated proprietary blobs
    Haptic improvements
    Various minor optimizations
    LOS upstream sync

    19 February 2021
    Improved Wifi
    Improved audio
    LOS upstream sync

    06 February 2021
    Improved brightness levels
    Finished reworking tree
    February LOS upstream sync
    Latest security patches

    24 Jannuray 2021
    Fixed "Fast Charging" string, except for original charger!!! (Fast charging IS working, just does not says it's fast in lockscreen).
    Added 30Hz and 50Hz display frequency in display options
    Cleaned up audio routes


    19 Jannuary 2021
    Reverted a prop which was interferring with whatsapp videos.

    18 Jannuary 2021
    Fixed fingerprints
    Rewritten init_surya.cpp
    Removed more useless stuff
    Activated correctly second SIM card
    Added a few translations
    Improved brighness
    Improved Wifi networks
    Fixed tethering+bluetooth

    05 Jannuary 2021
    WiFi Display fixed, finally!
    Resolved bug with speakerphone and reboot

    05 Jannuary 2021
    WiFi Display not fixed
    Product partition enlarged
    Device Tree reworked for proper contribution recognition
    AOD disabled. Once fixed will be available again.

    01 Jannuary 2021
    DT2W Fixed.

    29 December 2020
    New device tree is up.
    Brightness works again
    DT2W not working
    AOD not working
    FM Radio fixed (again)

    29 December 2020
    Final fix for low volume recording.
    WiFI Display still not fixed (please send logs!!!)
    Device tree cleaned up a lot
    add Higher Aspect Ratio
    statusbar : avoid display parameters on Notch
    SELinux is showing Enforcing in Trust

    28 December 2020
    Added audio fixes for low volume.
    Added full WiFi Display support (to be confirmed)

    26 December 2020
    New parittion size.
    Bluetooth now reporting working properly.

    24 December 2020
    Tentative SELinux enforcing.

    22 December 2020
    Added FM radio support, FM radio working.
    SELinux still permissive

    20 December 2020
    Reworked vendor mixing camera blobs from A10 branch and telephony from A11 branch.
    Camera is reported working.
    SIM card is reported working.
    VoLTE and WoWiFi reported working.
    FM Radio NOT working.

    19 December 2020
    New beta build for camera fix.
    Let me know if it works!

    18 December 2020
    SIM card works
    missing camera
    selinux permissive, will try to fix in later build
    19
    Passing SafetyNet and Google Play Certification

    SafetyNet and Play Store certification

    (guide updated 24 aug 2022, for Magisk 25.2)

    LineageOS, by charter, does not alter any safety ptotection set by Google. In our case, having an unlocked bootloader, safetynet will always fail by Google decision. Now, passing safety net is required for banking apps and even some games. Also, it is required for "play store certification", which will prevent you from even searching for some apps (like Netflix).
    Blame Google for all this.

    --ALL STEPS ARE MANDATORY, NONE CAN BE SKIPPED UNLESS EXPLICITY OPTIONAL--

    Install Magisk

    Download latest stable magisk apk from Magisk website (https://github.com/topjohnwu/Magisk). Rename it as .zip and flash it from recovery. Some recoveries, like TWRP, will flash the apk directly, others will require the rename.
    Boot LOS and install the apk file.

    Hide Magisk apps and Enable Zygisk & blocklist

    Open Magisk App, go to settings and hide the magisk app. Give it a name you will remember.
    After magisk app has been hidden, go back to settings and enable Zygisk (beta).
    Now apply the blocklist and select all the apps you like NOT to detect Magisk. This must include Google Play Services and Google Play Store.

    Install SafetyNet fix module

    kDrag0n developed a fix that can be flashed via Magisk. You must download the module (https://github.com/kdrag0n/safetynet-fix/releases), select at least version 2.2.1, and install it from inside Magisk app.

    Setup Fingerprint

    Download latest Props module for Magisk (https://forum.xda-developers.com/t/...t-prop-edits-and-more-v6-1-2.3789228/page-274) and install it within Magisk. Reboot your phone.
    Now, after reboot, open a terminal (use "adb shell" from pc, or install termux from play store) and type:
    su (grant root access!)
    props (a text based menu will popup)
    Now select "1" (edit fingerprint), type "f" (pick fingerprint) select "22" (poco) then select any one poco x3 model. Which one really doesn't matter, but make sure to choose the right Android version.
    Confirm and reboot phone.

    Clear caches for Google stuff

    Now, open settings - apps and clear data&cache for Google Play Store and Google Play Services.
    One last reboot!

    Don't want root?

    If you dont want root... Just disable it from within Magisk!

    OPTIONAL Additional stuff

    Magisk from 24.1 removed the built-in modules repository. If you like it back, you can install Fox's Magisk Module Manager app (https://github.com/Fox2Code/FoxMagiskModuleManager).


    LineageOS on SafetyNet (https://www.lineageos.org/Safetynet)
    Kdrag0n on SafetyNet (https://github.com/kdrag0n/safetynet-fix)
    SafetyNetFix Magisk Module (https://github.com/kdrag0n/safetynet-fix/releases)
    Magisk download (https://github.com/topjohnwu/Magisk)
    Props Module for Magisk (https://forum.xda-developers.com/t/...t-prop-edits-and-more-v6-1-2.3789228/page-274)
    fox's Magisk Module Manager (https://github.com/Fox2Code/FoxMagiskModuleManager)
    18
    I have some news. I am working on Lineage-18.1 and so far i am having some good progress.
    I managed to boot it, it's still unstable and a lot work is required, but it's steady.

    It is OSS based, so this will be official no doubt this time.
    18
    Official build is again underway and will be ready in a few days.
    Everything has been approved this time we are just waiting for hudson & wiki merge to be approved.

    I think there is good hope that the first official build will be next week.