[ROM][10/12] LineageOS OFFICIAL [SURYA]KARNA]

[haupauge]

> 7 days uptime with 26-09-22 nightly and LOS kernel. Looks good?!

yeah, its running very well

 

[haupauge]

After trial and error, I found that disabling volte solves the issue. However, I need volte to improve call quality.

mine has also no dial tone on outgoing calls. i tried to disable LTE but with no luck. could somebody give me an advice?

 

[Nexonian]

What exactly did you disable? You need to disable phone calls via LTE (VoltE), not LTE in general. This can be found in the SIM card settings.

 

[Mobe1969]

I'm struggling to get gcam to work. In the instructions it tells you to copy the XML file somewhere, but it is unclear. Eg "under some folder like "gcam/config7". And it says "double-tap on the black area on the bottom of the screen." Is this in some app? Somewhere in the launch bar? I personally don't have some black area at the bottom of my screen. I mean I thought it was referring to gcam itself, but when I open gcam it just crashes. No mater what build I download form that gdrive folder

Can anyone help? I don't use gapps - I suspect this might be related.

 

[RobSouthern]

October 10 update has almost completely fixed freezing for me. I get occasional pauses for 10 seconds, but they are very rare, nothing like before (total freeze and hard reset required)

 

[gardiol]

I'm struggling to get gcam to work. In the instructions it tells you to copy the XML file somewhere, but it is unclear. Eg "under some folder like "gcam/config7". And it says "double-tap on the black area on the bottom of the screen." Is this in some app? Somewhere in the launch bar? I personally don't have some black area at the bottom of my screen. I mean I thought it was referring to gcam itself, but when I open gcam it just crashes. No mater what build I download form that gdrive folder

Can anyone help? I don't use gapps - I suspect this might be related.

GCams don't work without gapps i am afraid.

 

[gardiol]

Use OpenCamera or some other free cameras

 

[RobSouthern]

I'm struggling to get gcam to work. In the instructions it tells you to copy the XML file somewhere, but it is unclear. Eg "under some folder like "gcam/config7". And it says "double-tap on the black area on the bottom of the screen." Is this in some app? Somewhere in the launch bar? I personally don't have some black area at the bottom of my screen. I mean I thought it was referring to gcam itself, but when I open gcam it just crashes. No mater what build I download form that gdrive folder

Can anyone help? I don't use gapps - I suspect this might be related.

I have gcam working with microg installed - GCam_7.3.018_Urnyx05-v2.2-fix. Config can only be loaded within gcam and double tap on the black areas near the shutter button is what you need to do to load.

 

[Mobe1969]

I have gcam working with microg installed - GCam_7.3.018_Urnyx05-v2.2-fix. Config can only be loaded within gcam and double tap on the black areas near the shutter button is what you need to do to load.

OK so it needs other stuff to work, it won't work with straight lineage

 

[gardiol]

OK so it needs other stuff to work, it won't work with straight lineage

Either gapps or microg is required.

 

[Noter2017]

OK so it needs other stuff to work, it won't work with straight lineage

This should work:

GitHub - lukaspieper/Gcam-Services-Provider: App faking only the absolute necessary Apis to use Gcam without Play Services

App faking only the absolute necessary Apis to use Gcam without Play Services - GitHub - lukaspieper/Gcam-Services-Provider: App faking only the absolute necessary Apis to use Gcam without Play Ser...

github.com

 

[oxygenmouse]

October 10 update has almost completely fixed freezing for me. I get occasional pauses for 10 seconds, but they are very rare, nothing like before (total freeze and hard reset required

Unfortunately I still get the total freezes with October 10 update - nothing changed here :/

 

[RobSouthern]

Unfortunately I still get the total freezes with October 10 update - nothing changed here :/

I disabled voice over network (VoLTE) based on an earlier suggestion so perhaps that has also helped me. Maybe try that?

 

[Nexonian]

October 10 update has almost completely fixed freezing for me. I get occasional pauses for 10 seconds, but they are very rare, nothing like before (total freeze and hard reset required)

Installed this one today, crashed a few hours later.

 

[Nexonian]

I disabled voice over network (VoLTE) based on an earlier suggestion so perhaps that has also helped me. Maybe try that?

That only fixes the missing ring tone issue. I have VoLTE turned off, still crashes.

 

[RobSouthern]

I am trying to install magisk. First with the zip via lineage recovery and then the apk. But when I open the apk it gets uninstalled automatically. What I am doing wrong?

I rebooted into LOS recovery and installed via ADB sideload and that has worked well.

 

[Master One]

After having last checked in August, I'm now just about to convert the first of our POCO X3 NFC (surya) from ArrowOS 11 to LOS for microG 19.1, so what's up with

1. Firmware: The instructions say "12.5.7.0 (anything newer will work)" and the latest stable for Europe is V13.0.2.0.SJGEUXM. So can that one be used or is another version recommended?
2. Kernel: In August it was all about the StormBreaker kernel. What's the recommendation now? Still StormBreaker, SiLonT (though the latest release for these two is from July), QuickSilveR (latest release from 1st October) or stock?
3. Recovery: LOS Recovery still good enough or any TWRP recommendation?
4. GCam: Recommendation for which version and config from the provided link?

 

[LOLcorpse]

After having last checked in August, I'm now just about to convert the first of our POCO X3 NFC (surya) from ArrowOS 11 to LOS for microG 19.1, so what's up with

1. Firmware: The instructions say "12.5.7.0 (anything newer will work)" and the latest stable for Europe is V13.0.2.0.SJGEUXM. So can that one be used or is another version recommended?
2. Kernel: In August it was all about the StormBreaker kernel. What's the recommendation now? Still StormBreaker, SiLonT (though the latest release for these two is from July), QuickSilveR (latest release from 1st October) or stock?
3. Recovery: LOS Recovery still good enough or any TWRP recommendation?
4. GCam: Recommendation for which version and config from the provided link?

use 12.5.8 MI FW
Kernel Quicksilver or DEXK - based on QS (SB and silont has bad battery backup and worse than stock los kernel imho)
TWRP 3.7.0 FBE v2 by Brigudav
Gcam LMC is best

 

[sturges]

Recovery: LOS Recovery still good enough or any TWRP recommendation?

Depends on whether you need the extra features in twrp or not. LOS recovery works without a hitch for me (btw I use stock kernel and don't have any issue)

 

[Master One]

Two annoyances/bugs connected to dual-SIM use so far:

1. Aeroplane mode makes phone forget SIM configuration, so every time (and I use Aeroplane mode several times a day) I switch off Aeroplane mode the pop-up "Select a SIM for data" comes up and the settings for "Calls and SMS" are gone (reverts to "Ask every time" for both).
2. There is no possibility to configure two different ringtones for the two SIMs.

Nobody else here using two SIM cards?