[ROM][10] crDroid 6.27 [begonia/begoniain][OFFICIAL][FINAL]

[TTTT555]

*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned

crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today


Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn

Instructions:

First time installation:

• Carry out the necessary measures to unlock the bootloader.
• Connect the phone to the PC with the supplied cord.
• Transfer all valuable data from your phone's internal memory to PC. If you make a backup, then the folder with the backup (except if the backup is located on microSD).
• Reboot into Fastboot mode (see the header in the F.A.Q. for how to enter it)
• Download and unpack on your PC >> this << archive.
• In the unpacked archive, go to the folder with your device type (if you have an Indian phone, then in [begoniain], all others in [begonia].
• Run !_FLASH_IT_W.bat on Windows or !_FLASH_IT_L.sh on Linux (DO NOT CHANGE THESE SCRIPTS UNLESS YOU WANT TO GET A BRICK!!!)
• If something went wrong, check if ADB drivers are installed on Windows, or fastboot packages on Linux.
• The necessary images will be flashed and erased, etc., after which the phone itself will reboot into TWRP recovery.
• Make the format Data (section Wipe / Wipe, click the Format Data button, then enter "Yes").
• Reboot from TWRP to TWRP
• Make sure your phone's internal memory is opened in TWRP mode on your PC.
• Before starting the ROM installation, it is recommended to take measures to unlock the bootloader and save the critical sections of the phone.
• Download and place the archive with the firmware in the internal memory of the phone, as well as Google Apps, if you need them.
• Do a Wipe/Cleanup of the "system", "vendor", "cache" and "Dalvik|Art Cache" partitions.
• Click Installation / Install and select the archive with the firmware, then click the Add / Add button and select the archive with Google Apps, everything else will be installed and updated automatically.
• After installation, reboot again from TWRP to TWRP
• Make the format Data (section Wipe / Wipe, click the Format Data button, then enter "Yes").
• Reboot into the system and wait for initialization, usually 10 minutes is enough, if the download still fails, reboot forcibly into recovery (long hold volume up + on) and repeat the Format Data operation
• After booting the system, perform the initial setup, and then reboot.

TWRP installation:

• Before starting the ROM installation, it is recommended to take measures to unlock the bootloader and save the critical sections of the phone.
• Save important data, photos, and more.
• Download and place the archive with the firmware in the internal memory of the phone, as well as Google Apps if you need them.
• Reboot into TWRP if you're not already there (reboot by holding the volume up button).
• Wipe/Cleanup the "system", "vendor", "cache" and "Dalvik|Art Cache" partitions.
• Click Install/Install and select the firmware archive, then click the Add/Add button and select the Google Apps archive, everything else will be installed and updated automatically.
• After installation, reboot from TWRP to TWRP
• Do data formatting (section Wipe / Wipe, click the Format Data button, then enter "Yes").
• Reboot into the system and wait for initialization, usually 10 minutes is enough, if the download still fails, reboot forcibly into recovery (long hold volume up + on) and repeat the Format Data operation
• Once the system has booted, perform the initial setup and then reboot.

Update installation:

USE THESE INSTRUCTION ONLY FOR UPDATING FROM MY PREVIOUS BUILD TO A NEW !!!

• Make backups.
• Download and place the ROM to the internal memory of the phone
  (I do not recommend SD cards, often phones fail because they turn out to be broken)
• Reboot in TWRP (vol+ with power button)
• Click on Install menu and chose this ROM
• After installation click on "Wipe Art/Dalvic" button
• Reboot to system
• If you have a bootloop, make Format Data in TWRP (all data will be erased).

Rollback to the factory firmware:

• Download and unpack any MIUI Fastboot version ROM for begonia or begoniain
• Reboot to Fastboot mode (vol- or vol+ with power button)
• Run flash_all.bat on Windows or flash_all.sh on Linux
  DO NOT USE OTHER ROLLING METHODS IF YOU DO NOT WANT TO GET BRICK !!!

Sources:
ROM: https://github.com/crdroidandroid
Device: https://github.com/TTTT555/device_xiaomi_begonia
Kernel: https://github.com/TTTT555/kernel_xiaomi_begonia

Special thanks:

• @FancyPants
• @yourdaddy907
• @android_lover
• @ZIDAN44
• @Xakep1993
• And other Begonia development team members

Visit official website @ crDroid.net
crDroid Community Telegram
crDroid Device Telegram (links to donations to the author here)

Donate to help crDroid team pay server costs.

XDA:DevDB Information
crDroid, ROM for the Redmi Note 8 Pro

Contributors
TTTT555
ROM OS Version: Android 10
Based On: LineageOS & POTATO project

Version Information
Status: Stable, Final, EOL

Created 2020-06-29
Last Updated 2022-10-19

 

[TTTT555]

Build type: Final (EOL) Support chat (TG): https://t.me/crDroidBegonia Notes: - Recomended install fastboot version of MIUI A10 before. - If you have bootloop after installation, try format data again or to change GAPPS or flash MIUI and try again. - Reboot after a clean install and initial setup so that the BegoniaParts item appears in the settings. - GAPPS and Google Photo required for G-Cams. Opengapps recomended [ARM64 Pico or Nano (for OK Google)]. - If you will use Viper FX, then do not forget to enable legacy mode in the application settings. - If you will use the built-in G-Cams, do not forget to apply configs (three taps between the camshot button and gallery button). If the camera does not find the built-in configs, just reboot the device and try again. - If you OFF James DSP after ON, reenable Dirac (OFF/ON), if you need it. - If you OFF G-cam 64 after ON, reboot the device, otherwise bugs are possible. - ANX cam: If you have problems with a wide angle camera - just turn off the lens distortion correction function, or set the mode to 9/16. - If you have sound crackles, try ON OFF James DSP. - You can find additional kernels in the support chat (with ALMK, reduced voltage etc.) ===== 19 October, 2022 ===== - BegoniaParts updates - Media and audio fixes for game streamers - Game performance improvements - Kernel switched to SLMK by default ===== 05 January, 2022 ===== - Fixed playing of system sounds, incl. ringtones. - The config for the built-in Gcam is now also loaded after format data. - Fixed definition of wide-angle camera. BegoniaParts: - Added additional performance profiles - Added codec switcher - Added 80MHz Wi-Fi range switch - Added Force 64MP switch - Added V-Sync switch - Added switch for debug.sf.latch_unsignaled - Added switch to disable HW overlays ===== 31 December, 2021 ===== - Updates are now downloaded to /sdcard (default folder by TWRP) - Fixed flickering in Night mode - Added advanced Night Mode adjustment values - Wi-Fi Display for non-Chromecast devices - Fix TTL for advanced operators like red - Added GCam Mod Burial 8 (the best in terms of color rendition at the moment), the configuration file is unpacked into internal memory, you just need to activate it in the camera - Unification of Keymaster and TWRP with MIUI - Additional codecs from MTK - Integrated Dirac effect instead MiSound - Changed amplifier mode for external speaker - Fixes for SafetyNet - Vertical sync is activated and parameters are selected for better responsiveness of the interface - Fixed the volume of incoming calls in the headset and small speaker (a script has been written to recalculate the volume levels during a phone call, in the firmware settings you can select up to 60 levels) - Another tuning ZRAM - Added new Sepolicy rules - The installation archive integrates firmwares for the Global and Indian versions of the phone, together with TWRP - Updated factory libraries and added for a new type of frontal camera, as well as added sound libraries from newer MTK devices - Thermo profiles from the Indian version of the phone - Removed Sta2gBw 1 from /vendor/firmware/wifi.cfg which can cause problems (set manually to whoever needs it) - And many other subtle improvements and additions Kernel: - Added driver for new frontal camera - Enabled KSM support by default - Added an engine for adjusting the strength of vibration - Added new schedulers and "sioplus" selected by default / Thanks to 7Soldier for help with some features / BegoniaParts settings app: - MiSound -> Dirac Sound - Added performance profiles by adjusting the Schedutil governor downrate (you can edit the parameters yourself or add new ones in the files /vendor/bin/xiaomiparts.sh (chmod 0755) and /vendor/etc/init/hw/init.xiaomi_parts.rc (chmod 0644 ) - Choice of TCP Congestion Algorithm - FPS sensor - Additional wake-up gestures - Vibration strength adjustment

 

[adil_muhmd]

first time installation instructions for miui users or both miui and cfw custom rom users?

 

[TTTT555]

first time installation instructions for miui users or both miui and cfw custom rom users?

cfw users may can start by installing the archive (with next wipes, and format data if it was encrypted)

 

[smaylek]

I installed myself, the firmware fire installation is real in 2 clicks).

 

[keiyrno]

Sir,
what is HCE mode?

 

[TTTT555]

Sir,
what is HCE mode?

HCE - Android cloud storage technology for card data, with temporary pay tokens on phone, used by G-Pay, etc.
There is also data storage inside the NFC chip - SE (secure element), which can also be used to store e-sim data

 

[keiyrno]

HCE - Android cloud storage technology for card data, with temporary pay tokens on phone, used by G-Pay, etc.
There is also data storage inside the NFC chip - SE (secure element), which can also be used to store e-sim data

thank you for your explanation sir

 

[KonahZave]

Yayy thanks TTTT555 for AOSP

 

[gadmei.tw]

@TTTT555
When using QS- "night light". The screen will flash at a fixed frequency, there seems to be some problems.?

anyway, advance THANKS, Its very very good Begonia ROM!:good::good:

 

[KonahZave]

2 buttons navbar gesture error/bug: gesture for recents and chang into open apps. Overall amazing ROM, I love open source plus its lighter for download.

 

[eocobby721]

Anyone knows how to solve this? Anytime I restart my phone, I get a notification that my security has been weakened.

 

[KonahZave]

Anyone knows how to solve this? Anytime I restart my phone, I get a notification that my security has been weakened.

I guess its related with permissive kernel, or disabled SELinux...

 

[eocobby721]

I guess its related with permissive kernel, or disabled SELinux...

Yes it is. Any way to fix that?

 

[KonahZave]

Yes it is. Any way to fix that?

oooh yeah its you CObby only now I noticed your nick, well anyway I dont know sorry :crying:

 

[eocobby721]

oooh yeah its you CObby only now I noticed your nick, well anyway I dont know sorry :crying:

I was waiting to see if you notice :laugh:
Thanks.

 

[e45cream]

I'm also having lots of reboots with the fingerprint sensor. Looks like it's much slower than the standard one, and you need to keep your finger still for much longer.

 

[u8ububu]

@TTTT555 , did you disable the secure element due to the spiread_dma error?

 

[TTTT555]

Yes it is. Any way to fix that?

Later, but now you may off notice in /Settings/Security/Trust

@TTTT555 , did you disable the secure element due to the spiread_dma error?

nope, it is not related to this and will be fixed soon

I'm also having lots of reboots with the fingerprint sensor. Looks like it's much slower than the standard one, and you need to keep your finger still for much longer.

you're out of luck, your phone is from a problematic series with a fingerprint for custom firmwares, but we are working on it

 

[eocobby721]

Thanks Sir