[ROM][10][OFFICIAL] Lineage OS 17.1

Valentinatg · Jun 25, 2015 7 0 0

So I can comfirm power pack work with no efficient mod, thank you for answer.
So to confirm jbl still doesnt work?

Can we hope this will work in near future?

heithered · Jul 24, 2019 at 4:55 PM

numlock_ said:
Before official Lineage OS 16 launch (versions that @erfanoabdi release) battery efficient mod was working, I don't now why it didn't came to official Lineage OS.

Good workaround, but only works when charging from USB without power pack, if you have a power pack attached to phone this workaround become not useful because:

1) Power pack never fully charge because phone charges to 80% and power pack only around 20-40%
2) Power pack never charge if discharged and the pone is charged 80% or more
2) If power pack is charged it charges the phone to 100% anyway

Edit: I made a clean install of Lineage OS 16 formatting all partitions installing only lineage and openGapps, no problem with camera apps and others Gapps crashing anymore.
Edit2: Ambient gesture display is not working anymore. Aways grayed.
Edit3: Connectivity issue still present needing the workaround: https://forum.xda-developers.com/showpost.php?p=79307782&postcount=415.

Did you check the magisk module ACC? It can act as an efficiency mode replacement.

numlock_ · Oct 11, 2012 58 12 0

Valentinatg said:
So I can comfirm power pack work with no efficient mod, thank you for answer.
So to confirm jbl still doesnt work?

Can we hope this will work in near future?

I don't have JBL mod.

heithered said:
Did you check the magisk module ACC? It can act as an efficiency mode replacement.

No! I will check!

michael.schefczyk · Jul 25, 2019 at 6:50 AM

Wifi EAP TLS

Dear All,

My impression is that basically everything does work (thanks!!) and that this is an easy device to install. What I could not get to work is wifi EAP TLS. The device does just not connect. Other certificate applications (e.g., client certs in exchange accounts, client cert in chromium) except for wifi do seem to work. I find this problem on some 16.0 devices (e.g, bardockpro, kiwi) while others do work flawlessly (e.g., oneplus3). Is this shared?

I hesitate to submit a bug report through lineageos, as I did install the microg variant. That will have nothing to do with this issue, but bug reporting management usually just replies that microg is not supported. Should I post logs here?

Regards,

Michael Schefczyk

michael.schefczyk · Jul 26, 2019 at 4:09 PM

michael.schefczyk said:
Dear All,

My impression is that basically everything does work (thanks!!) and that this is an easy device to install. What I could not get to work is wifi EAP TLS. The device does just not connect. Other certificate applications (e.g., client certs in exchange accounts, client cert in chromium) except for wifi do seem to work. I find this problem on some 16.0 devices (e.g, bardockpro, kiwi) while others do work flawlessly (e.g., oneplus3). Is this shared?

I hesitate to submit a bug report through lineageos, as I did install the microg variant. That will have nothing to do with this issue, but bug reporting management usually just replies that microg is not supported. Should I post logs here?

Regards,

Michael Schefczyk

Dear All,

What I would very much like is (a) to understand the EAP-TLS wifi issue and (b) ideally get it solved. With the device, EAP-TTLS (eduroam, with just a CA certificate) does work, not EAP-TLS, however. I have full logcat information. Key excerpts of errors include:

07-25 18:02:22.480 27283 27283 I wpa_supplicant: TLS - SSL error: error:0900006e

EM routinesPENSSL_internal:NO_START_LINE
07-25 18:02:22.480 27283 27283 I wpa_supplicant: wlan0: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected
07-25 18:02:22.499 27283 27283 I wpa_supplicant: wlan0: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=DE/ST=.../L=.../O=.../emailAddress=.../CN=...' hash=...
07-25 18:02:22.500 27283 27283 I wpa_supplicant: wlan0: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=DE/ST=.../L=.../O=.../emailAddress=.../CN=...' hash=...

07-25 18:02:22.536 1992 2150 I keystore: 1 0
07-25 18:02:22.544 1992 2150 W keystore: Error in finish: -1000
07-25 18:02:22.545 27283 27283 W keystore-engine: Error during sign from keystore: 1
07-25 18:02:22.545 27283 27283 I wpa_supplicant: OpenSSL: openssl_handshake - SSL_connect error:00000000:invalid library (0)PENSSL_internal:invalid library (0)

07-25 18:02:33.733 23506 23622 E WifiVendorHal: getTxPktFates(l.2219) failed {.code = ERROR_NOT_AVAILABLE, .description = }

This one below is from kiwi, but same issue with different certificate:

07-25 21:10:24.974 3057 3057 I wpa_supplicant: TLS - SSL error: error:0900006e

EM routinesPENSSL_internal:NO_START_LINE
07-25 21:10:24.974 3057 3057 I wpa_supplicant: wlan0: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected
07-25 21:10:24.974 363 3223 I WifiHAL : Unknown EAPOL message type
07-25 21:10:24.986 363 3223 I chatty : uid=1010 [email protected] identical 2 lines
07-25 21:10:24.995 363 3223 I WifiHAL : Unknown EAPOL message type
07-25 21:10:24.997 3057 3057 I wpa_supplicant: wlan0: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=DE/ST=.../L=.../O=.../emailAddress=.../CN=...' hash=...
07-25 21:10:25.000 3057 3057 I wpa_supplicant: wlan0: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=DE/ST=.../L=.../O=.../emailAddress=.../CN=...' hash=...

07-25 21:10:25.027 2308 2361 I keystore: 1 0
07-25 21:10:25.052 2308 2361 W keystore: Error in finish: -1000
07-25 21:10:25.052 3057 3057 W keystore-engine: Error during sign from keystore: 1
07-25 21:10:25.052 3057 3057 I wpa_supplicant: OpenSSL: openssl_handshake - SSL_connect error:00000000:invalid library (0)PENSSL_internal:invalid library (0)

If required, I can supply more information.

The same certificates does work flawlessly on other devices (jfltexx, h870).

Regards,

Michael Schefczyk

m4f1050 · Jul 27, 2019 at 2:42 PM

What density is this ROM set to? Stock is 640

ro.sf.lcd_density

ischninet · May 1, 2016 66 8 0

why is efficiency mode and jbl support not coming to this rom? Omnirom supports it. What is the issue in LOS16?

hckidz · Dec 12, 2010 7 3 0

this rom support video recording 60fps?

michael.schefczyk · Aug 13, 2019 at 11:56 PM

michael.schefczyk said:
Dear All,

What I would very much like is (a) to understand the EAP-TLS wifi issue and (b) ideally get it solved. With the device, EAP-TTLS (eduroam, with just a CA certificate) does work, not EAP-TLS, however. I have full logcat information. Key excerpts of errors include:

07-25 18:02:22.480 27283 27283 I wpa_supplicant: TLS - SSL error: error:0900006eEM routinesPENSSL_internal:NO_START_LINE
07-25 18:02:22.480 27283 27283 I wpa_supplicant: wlan0: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected
07-25 18:02:22.499 27283 27283 I wpa_supplicant: wlan0: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=DE/ST=.../L=.../O=.../emailAddress=.../CN=...' hash=...
07-25 18:02:22.500 27283 27283 I wpa_supplicant: wlan0: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=DE/ST=.../L=.../O=.../emailAddress=.../CN=...' hash=...

07-25 18:02:22.536 1992 2150 I keystore: 1 0
07-25 18:02:22.544 1992 2150 W keystore: Error in finish: -1000
07-25 18:02:22.545 27283 27283 W keystore-engine: Error during sign from keystore: 1
07-25 18:02:22.545 27283 27283 I wpa_supplicant: OpenSSL: openssl_handshake - SSL_connect error:00000000:invalid library (0)PENSSL_internal:invalid library (0)

07-25 18:02:33.733 23506 23622 E WifiVendorHal: getTxPktFates(l.2219) failed {.code = ERROR_NOT_AVAILABLE, .description = }

This one below is from kiwi, but same issue with different certificate:

07-25 21:10:24.974 3057 3057 I wpa_supplicant: TLS - SSL error: error:0900006eEM routinesPENSSL_internal:NO_START_LINE
07-25 21:10:24.974 3057 3057 I wpa_supplicant: wlan0: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected
07-25 21:10:24.974 363 3223 I WifiHAL : Unknown EAPOL message type
07-25 21:10:24.986 363 3223 I chatty : uid=1010 [email protected] identical 2 lines
07-25 21:10:24.995 363 3223 I WifiHAL : Unknown EAPOL message type
07-25 21:10:24.997 3057 3057 I wpa_supplicant: wlan0: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=DE/ST=.../L=.../O=.../emailAddress=.../CN=...' hash=...
07-25 21:10:25.000 3057 3057 I wpa_supplicant: wlan0: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=DE/ST=.../L=.../O=.../emailAddress=.../CN=...' hash=...

07-25 21:10:25.027 2308 2361 I keystore: 1 0
07-25 21:10:25.052 2308 2361 W keystore: Error in finish: -1000
07-25 21:10:25.052 3057 3057 W keystore-engine: Error during sign from keystore: 1
07-25 21:10:25.052 3057 3057 I wpa_supplicant: OpenSSL: openssl_handshake - SSL_connect error:00000000:invalid library (0)PENSSL_internal:invalid library (0)

If required, I can supply more information.

The same certificates does work flawlessly on other devices (jfltexx, h870).

Regards,

Michael Schefczyk

My impression is that wifi 802.1x EAP TLS not working is due to a cert store issue. I find identical problems on kiwi and griffin. On the other hand, oneplus3 and (brand new official lineageos 16.0) jfltexx are able to use wifi802.1x EAP TLS without issues based on the very same certificates. The reason I suspect the cert store issue is bardockpro. That device did have the same problem one month ago, but it does work fine now. The positive change did seem to happen after this appeared under "recent changes": https://review.lineageos.org/c/Linea...urity/+/251056 Unfortunately, I do not understand the issue in any greater depth beyond this speculative thought. Is there something which may need to be done in order to extend the same benefit to griffin as well?

isgakbrfc · Apr 2, 2014 54 5 0

Good day everybody

i hope somebody can help this noob. i rooted my Moto Z, and installed Twrp... However, im literally struggling to install custom roms. Getting an error message sayin the roms are only for the Z model which i have. Question is, have i somehow wiped or forgot to add in my device detail or description, which twrp doesnt recognise as a Moto Z?

would appreciate an easy guide on how to fix this.thanks all

numlock_ · Oct 11, 2012 58 12 0

You have Moto Z or Moto Z Play? This lineage is compatible only with Moto Z.

isgakbrfc · Apr 2, 2014 54 5 0

numlock_ said:
You have Moto Z or Moto Z Play? This lineage is compatible only with Moto Z.

Moto Z XT1650-03 is what i have. i just cant figure this out

numlock_ · Oct 11, 2012 58 12 0

explain exact what are you doing

isgakbrfc · Apr 2, 2014 54 5 0

numlock_ said:
explain exact what are you doing

so basically i enter into recovery ie twrp.. have already downloaded the Rom, gapps and Magisk. As soon as i swipe to Flash, i get an error saying that the rom is only compatible with Moto Z devices(which i have)

i managed to install the Viper 7.1 Rom, but cant do anything when it comes to Android 9

Ill try and get some screenshots up

---------- Post added at 12:37 PM ---------- Previous post was at 12:17 PM ----------

as per the below pics, you can see i could flash Viper, but when i try this rom it doesnt recognise my device. anything in there that im missing?

https://imgur.com/undefined

numlock_ · Oct 11, 2012 58 12 0

isgakbrfc said:
so basically i enter into recovery ie twrp.. have already downloaded the Rom, gapps and Magisk. As soon as i swipe to Flash, i get an error saying that the rom is only compatible with Moto Z devices(which i have)

i managed to install the Viper 7.1 Rom, but cant do anything when it comes to Android 9

Ill try and get some screenshots up

---------- Post added at 12:37 PM ---------- Previous post was at 12:17 PM ----------

as per the below pics, you can see i could flash Viper, but when i try this rom it doesnt recognise my device. anything in there that im missing?

https://imgur.com/undefined

You need to be on stock android to flash LineageOS. Search for stock moto z android, flash it and then flash lineageos 16. https://wiki.lineageos.org/devices/griffin/install

isgakbrfc · Apr 2, 2014 54 5 0

numlock_ said:
You need to be on stock android to flash LineageOS. Search for stock moto z android, flash it and then flash lineageos 16. https://wiki.lineageos.org/devices/griffin/install

Thanks man.. Would I flash stock via twrp as well?

Sent from my XT1650-03 using Tapatalk

numlock_ · Oct 11, 2012 58 12 0

No, via adb sideload, there is a thread here explaining how to flash search about

isgakbrfc · Apr 2, 2014 54 5 0

numlock_ said:
No, via adb sideload, there is a thread here explaining how to flash search about

Out of interest, why could I flash Viper? I basically tried flashing Lineage, off of stock Android the 1st time. So I had no other custom ROM loaded.

Sent from my XT1650-03 using Tapatalk

numlock_ · Oct 11, 2012 58 12 0

isgakbrfc said:
Out of interest, why could I flash Viper? I basically tried flashing Lineage, off of stock Android the 1st time. So I had no other custom ROM loaded.

Sent from my XT1650-03 using Tapatalk

I don't know why, the screen you posted is broken, maybe you tried the wrong way, you need latest twrp and flash trough adb sideload.

isgakbrfc · Apr 2, 2014 54 5 0

numlock_ said:
I don't know why, the screen you posted is broken, maybe you tried the wrong way, you need latest twrp and flash trough adb sideload.

Okay thanks. I'll check the version of Twrp. Can I just flash the latest version over the current one via cmd?

Sent from my XT1650-03 using Tapatalk

[ROM][10][OFFICIAL] Lineage OS 17.1

Member

Senior Member

Senior Member

Member

Member

Senior Member

Senior Member

Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member