• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][10]Resurrection-Remix v8.6.9 Official[SURYA][KARNA](10/06/2021)

Search This thread

Lostark13

Senior Member
[10.0][OFFICIAL]Resurrection Remix v8.6.9 [surya][karna]


rrlogo.png

Resurrection Remix Q

Code:
[SIZE="4"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]



rrabout.png


Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome

combination of performance, customization, power and the most new features, brought directly to your Device.


Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!

Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.







rrinstall.png



Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom
Boot into recovery
Flash ResurrectionRemix Rom
Format Data
First boot may take up to 10 minutes.



rrdownload.png

ROM Download


rrsource.png


Resurrection Remix Source


rrthanks.png


XDA Developers
LineageOs Team
AICP
Crdroid
AOSIP
DU
Xtended
Evolution X
Bliss
Omni Team
And Of Course To All The Supporters, Donators And Users
Join our Telegram channel : https://t.me/resurrectionremixchat


rrbugs.png


If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.

Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.



rrsocial.png




XDA:DevDB Information
[ROM][10]Resurrection-Remix Official[surya][karna], ROM for the Xiaomi Poco X3 NFC

Contributors
Lostark13, mahajant99
Source Code: https://github.com/lostark13/device_xiaomi_surya

ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: V12.0.9 (surya),V12.0.10(karna)
Based On: LOS

Version Information
Status:
Stable
Current Stable Version: 3
Stable Release Date: 2020-10-13

Created 2020-10-13
Last Updated 2021-6-10
 
Last edited:

Lostark13

Senior Member
Reserved

13 November 2020 Update
-Added Support For Karna (Poco X3 Indian Variant)
-Synced With Latest Rom Source Changes
-Fixed Battery Overlays
-Under The Hood Changes

10 December 2020 Update
-FIxed 5Ghz WiFi
-Fixed 4K Record
-Fixed FM
-Added FPS Toggle
-Fixed HDR
-Old Stereo Sound
-Unified Build

12 December 2020 Update
-Fixed Yellow Tint At Boot
-Fixed Notification Light
-Address Some Sepolicy Denials
-Synced With Latest Rom Source Change

27 December 2020 Update
-Fixed Charging LED
-Fixed Wifi Display/CAST
-Fixed Sound Recording After 2 Seconds
-Added Smart Charging
-Added RR Wallpapers
-Vanilla Build (No More Gapps Version)

23 January 2021 Update
-Fixed Vowifi
-Fixed Selinux Status In Trust
-Added Power Profile For Karna From MIUI 12.0.8
-Added Clear Speaker In Parts
-Force Tripple Frame Buffer

10 June 2021 Update
-Shipped With Cannon Kernel v2
-Added Touch/Gaming Profiles
-Latest Source Synced

Note-Need Clean Flash For Vanilla Build If Coming From Gapps Version.
 
Last edited:

Aburel18

Senior Member
Jun 20, 2009
162
26
London
Hi , nice one sir , i managed to install it at the end i had to downgrade to 12.0.0 how is saying here Lostark13
the rom works super smooth love the RR features , brings back the memories , love to see it again
Only one problem i just found and is super important for me , is the Bluetooth . is not working , is greyed out
i saw the wifi not working and i flashed 12.0.2 and now is working , what should i do for Bluetooth to work ? or is broken from the rom ?

a to don;t forget , i miss the xpoco equaliser or how they call it Dolby sound profile . on Voice profile my phone was super loud ,
 

thesign180

Member
May 10, 2015
41
5
Beautiful! I was running RR on the OP7T, just sold that off and got the X3, great to see the rom is here as well so I won't miss my 7T so much :p
 

albert0pia

Member
Aug 8, 2013
39
14
Sydney
Downgrade To v12.0.2
Tester Tried On v12.0.3 And Not Working

Greetings OP.
Firstly, I wanna give huge thanks for this ROM. It is by far my favorite out of all the others I've tried. Google Pay and other apps that rely on SafetyNet worked out of the box. That is a wonderful thing especially considering how stranded I was yesterday when I couldn't buy food or petrol or pay for my car's service.
However, I have an issue with Bluetooth. I have tried your suggestion to downgrade to v12.0.2 before flashing. I have done this several times now but the issue persists.
Something else I noticed with AOSP-based ROMs is that the WiFi signal strength is never at maximum even when I am standing a few meters away from my router. And sometimes, WiFi would randomly disconnect when I am about 5 meters away from the router with 2 walls between us. Not a dealbreaker by any means, just a mild annoyance.

Thank you abundantly again for your work. I'll be sending some 'beers' your way.
 

Lostark13

Senior Member
Regarding Bluetooth Fix

Greetings OP.
Firstly, I wanna give huge thanks for this ROM. It is by far my favorite out of all the others I've tried. Google Pay and other apps that rely on SafetyNet worked out of the box. That is a wonderful thing especially considering how stranded I was yesterday when I couldn't buy food or petrol or pay for my car's service.
However, I have an issue with Bluetooth. I have tried your suggestion to downgrade to v12.0.2 before flashing. I have done this several times now but the issue persists.
Something else I noticed with AOSP-based ROMs is that the WiFi signal strength is never at maximum even when I am standing a few meters away from my router. And sometimes, WiFi would randomly disconnect when I am about 5 meters away from the router with 2 walls between us. Not a dealbreaker by any means, just a mild annoyance.

Thank you abundantly again for your work. I'll be sending some 'beers' your way.

The New Update Will Have Bluetooth Fixed And Also Some Minor Bugs Fixed Too.
 
Last edited:

Cephalophinae

Member
Jan 14, 2012
16
1
Brick after installation of RR

Hi guys,

I installed this ROM yesterday. Now my Poco X3 is bricked. Any help appreciated.

What I have done (I came from MIUI with the latest updates).
  1. Unlocked bootloader
  2. Installed TWRP from this thread: https://forum.xda-developers.com/xi...lopment/recovery-twrp-xiaomi-poco-x3-t4167199
  3. Booted into TWRP and did a full wipe included data (don't know exactly, but system wasn't choosable)
  4. Pushed the Rom-zip from this thread to /sdcard/ and installed it via TWRP
  5. After successfull installation: reboot system
But the system didn't boot. There was only the screen with "POCO" in the middle and "powered by android" on the button for ca. 1s. Then the mobile shut off.
Same for fastboot and recovery. When I hold down or hold up the volume-button while powering on, there is also the described screen for 1s, before the mobile shuts off.

Once again: Any help or tip much appreciated!
 

Lostark13

Senior Member
Installation Process

Hi guys,

I installed this ROM yesterday. Now my Poco X3 is bricked. Any help appreciated.

What I have done (I came from MIUI with the latest updates).
  1. Unlocked bootloader
  2. Installed TWRP from this thread: https://forum.xda-developers.com/xi...lopment/recovery-twrp-xiaomi-poco-x3-t4167199
  3. Booted into TWRP and did a full wipe included data (don't know exactly, but system wasn't choosable)
  4. Pushed the Rom-zip from this thread to /sdcard/ and installed it via TWRP
  5. After successfull installation: reboot system
But the system didn't boot. There was only the screen with "POCO" in the middle and "powered by android" on the button for ca. 1s. Then the mobile shut off.
Same for fastboot and recovery. When I hold down or hold up the volume-button while powering on, there is also the described screen for 1s, before the mobile shuts off.

Once again: Any help or tip much appreciated!

Please Be Sure You Are On MIUI 12 v12.0.2
1.Download Rom
2.Boot Into Recovery.
3.Flash Rom Zip (No Need Of Gapps As Its Pre-Included)
4.Format Data And Click On Reboot
 

Cephalophinae

Member
Jan 14, 2012
16
1
Please Be Sure You Are On MIUI 12 v12.0.2
1.Download Rom
2.Boot Into Recovery.
3.Flash Rom Zip (No Need Of Gapps As Its Pre-Included)
4.Format Data And Click On Reboot

Thanks for the hint, but point 2. is not possible. As I wrote above there is only for 1s the screen with "POCO" in the middle, after turning the phone on (no matter, if I hold up or hold down volume during powering on). Then the mobile switches off. So I can't boot into fastboot to boot twrp.

I don't know which MIUI-Version was on the phone, before I installed RR. The latest OTA-updates yesterday were installed.

Any other hints?
 

keenan316

Senior Member
Dec 3, 2009
496
153
Xiaomi Poco X3 NFC
Thanks for the hint, but point 2. is not possible. As I wrote above there is only for 1s the screen with "POCO" in the middle, after turning the phone on (no matter, if I hold up or hold down volume during powering on). Then the mobile switches off. So I can't boot into fastboot to boot twrp.

I don't know which MIUI-Version was on the phone, before I installed RR. The latest OTA-updates yesterday were installed.

Any other hints?

I think the problem here is that you likely flashed from 12.0.3 firmware back to the older 12.0.2 firmware which caused the brick.

Honestly, this is probably obvious for 90% of members, but developers really need to state which firmware their ROMs are build from and include these risks as a step in the instructions.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    For me, it's not about official or not, but having full control. My phone works perfectly with a solid Android version.
    Well, more eyes look over the source code. That's a good thing by official. Main problem is here the security updates.
  • 35
    [10.0][OFFICIAL]Resurrection Remix v8.6.9 [surya][karna]


    rrlogo.png

    Resurrection Remix Q

    Code:
    [SIZE="4"]/*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */[/SIZE]



    rrabout.png


    Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome

    combination of performance, customization, power and the most new features, brought directly to your Device.


    Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!

    Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.







    rrinstall.png



    Make sure you have a custom recovery installed(TWRP is the preferred recovery)
    Download the latest Resurrection Remix Rom
    Boot into recovery
    Flash ResurrectionRemix Rom
    Format Data
    First boot may take up to 10 minutes.



    rrdownload.png

    ROM Download


    rrsource.png


    Resurrection Remix Source


    rrthanks.png


    XDA Developers
    LineageOs Team
    AICP
    Crdroid
    AOSIP
    DU
    Xtended
    Evolution X
    Bliss
    Omni Team
    And Of Course To All The Supporters, Donators And Users
    Join our Telegram channel : https://t.me/resurrectionremixchat


    rrbugs.png


    If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.

    Download the MatLog app from the Play Store.
    After downloading the MatLog app, go to the app settings, and change the log level to Debug.
    Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
    Copy and paste the entire log either to Hastebin or Pastebin
    Save the log, and copy and paste the link into the thread with a brief description of the error.



    rrsocial.png




    XDA:DevDB Information
    [ROM][10]Resurrection-Remix Official[surya][karna], ROM for the Xiaomi Poco X3 NFC

    Contributors
    Lostark13, mahajant99
    Source Code: https://github.com/lostark13/device_xiaomi_surya

    ROM OS Version: Android 10
    ROM Kernel: Linux 4.x
    ROM Firmware Required: V12.0.9 (surya),V12.0.10(karna)
    Based On: LOS

    Version Information
    Status:
    Stable
    Current Stable Version: 3
    Stable Release Date: 2020-10-13

    Created 2020-10-13
    Last Updated 2021-6-10
    17
    Reserved

    13 November 2020 Update
    -Added Support For Karna (Poco X3 Indian Variant)
    -Synced With Latest Rom Source Changes
    -Fixed Battery Overlays
    -Under The Hood Changes

    10 December 2020 Update
    -FIxed 5Ghz WiFi
    -Fixed 4K Record
    -Fixed FM
    -Added FPS Toggle
    -Fixed HDR
    -Old Stereo Sound
    -Unified Build

    12 December 2020 Update
    -Fixed Yellow Tint At Boot
    -Fixed Notification Light
    -Address Some Sepolicy Denials
    -Synced With Latest Rom Source Change

    27 December 2020 Update
    -Fixed Charging LED
    -Fixed Wifi Display/CAST
    -Fixed Sound Recording After 2 Seconds
    -Added Smart Charging
    -Added RR Wallpapers
    -Vanilla Build (No More Gapps Version)

    23 January 2021 Update
    -Fixed Vowifi
    -Fixed Selinux Status In Trust
    -Added Power Profile For Karna From MIUI 12.0.8
    -Added Clear Speaker In Parts
    -Force Tripple Frame Buffer

    10 June 2021 Update
    -Shipped With Cannon Kernel v2
    -Added Touch/Gaming Profiles
    -Latest Source Synced

    Note-Need Clean Flash For Vanilla Build If Coming From Gapps Version.
    8
    Did you manage to make Portrait shots and 64MP features work?

    Download these modules from camera.aeonax.com:

    • ANXFrameworkUnity_190.BountifulDistantHapuka
    • ANXCameraUnity_190.BountifulDistantHapuka
    • ANXCameraHotfix.190.BootloopFix

    Install it via magisk
    Give all permissions manually to anxcam

    Install ANX Pro from Play Store and change values

    Portrait fix: 'Portrait Lighting Back' = false
    Front cam fix: 'Hand Gestures' = false

    NOTE: Only A10 is supported for now
    6
    Hm..
    At least he's still alive. His GitHub acc is still active.

    @Lostark13
    Can you give us some news?
    Thanks
    I Will Definately Update The Rom When There's A Major Update In Source Side
    5
    Just in, new update

    New Build for surya available
    RROS-Q-8.6.7-20210303-surya-Official.zip

    FileSize: 792 MB
    SHA256: a5a12d3e465b689877e85d7322626218db8ef937aa4b7dee3eb00dc719d79773

    Edit: just flashed th update. Led light seems to be fine. Flickering screen while turn on/off is gone.

    The RR surya team is fantastic.