[ROM][10]Resurrection-Remix v8.6.9 Official[SURYA][KARNA](10/06/2021)

Search This thread

m0han

Senior Member
Apr 30, 2012
4,868
1,951
....just updated my FW and ROM to the latest versions for A10 (FW 12.0.9.0, RR 8.6.9) up from RR 8.6.5 (unknown FW....is there any way to resolve it?..... didn't wipe anything when installing the new FW and RR...
is the update from the same dev? or, based on the same 'trees'? if not, it'd be best to do a clean install, imho.
 

temporarium

Senior Member
Hey, I just updated my FW and ROM to the latest versions for A10 (FW 12.0.9.0, RR 8.6.9) up from RR 8.6.5 (unknown FW, probably one from around December 2019), and I have some issues with my proximity sensor. It worked perfectly before the update.

Basically, the sensor still works somewhat, detecting things infront of it, but it doesn't always switch off when the thing is no longer infront of it. I downloaded an app from the playstore called "Sensortest" that allows me to see exactly when it's on and off. So almost always when I go to unlock my phone it greets me with "Press and hold the power button to unlock", which means the proximity sensor is on, when it shouldn't be.

Is this a known issue, and is there any way to resolve it? Perhaps a patch, a module, or a custom kernel that could fix it? Maybe wiping cache or dalvik in TWRP (I didn't wipe anything when installing the new FW and RR)?
Try disabling Pocket Detection. See if anything changes/improves.
 

Imonobor

Member
Dec 3, 2019
20
3
is the update from the same dev? or, based on the same 'trees'? if not, it'd be best to do a clean install, imho.
Well, I sure hope RR 8.6.5 and RR 8.6.9 are from the same dev xD
About the FW, they should both be from Xiaomi, right?
Try disabling Pocket Detection. See if anything changes/improves.
I disabled it, but the sensor itself is still malfunctioning when I test it in the app. The strange thing is that when I shine bright light into it, it deactivates, but then if I remove it, it activates again, and keeps "detecting" something in front of it.
 

temporarium

Senior Member
Well, I sure hope RR 8.6.5 and RR 8.6.9 are from the same dev xD
About the FW, they should both be from Xiaomi, right?

I disabled it, but the sensor itself is still malfunctioning when I test it in the app. The strange thing is that when I shine bright light into it, it deactivates, but then if I remove it, it activates again, and keeps "detecting" something in front of it.
I haven't done any firmware "upgrades" on mine, but make sure your firmware is for A10.
 

Imonobor

Member
Dec 3, 2019
20
3
I found a thread, where they blame this behaviour on FW version 12.0.8.0, and I guess they didn't fix it in 12.0.9.0, but in one of the A11 FW updates that followed. So I'll downgrade to 12.0.7.0 and report back.
On a side note, I found this useful instruction in that thread:
Recalibrate proximity sensor.
1. open settings
2. click all specs
3. click Kernel Version 3 milion times
4. CIT menu will open.
5. click three dots top right corner
6. click additional tools
7. select option nr.10 proximity sensor
8. click calibrate.
9 go back to CIT
10. Select option nr. 15 proximity sensor to test
But this only applies to the stock miui rom. Is there anything like this menu in RR? Sounds very useful to have.
 
  • Like
Reactions: pnin

Imonobor

Member
Dec 3, 2019
20
3
Yep, all problems with the proximity sensor disappeared as soon as I flashed 12.0.7.0 Global Firmware.
Haven't tried 12.0.8.0, but it's not global, but for EU, and from what I hear, that's where the problem originated. So I'd recommend changing the "recommended FW version" in the OP to 12.0.7.0
 
  • Like
Reactions: temporarium

Top Liked Posts

  • There are no posts matching your filters.
  • 35
    [10.0][OFFICIAL]Resurrection Remix v8.6.9 [surya][karna]


    rrlogo.png

    Resurrection Remix Q

    Code:
    [SIZE="4"]/*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */[/SIZE]



    rrabout.png


    Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome

    combination of performance, customization, power and the most new features, brought directly to your Device.


    Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!

    Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.







    rrinstall.png



    Make sure you have a custom recovery installed(TWRP is the preferred recovery)
    Download the latest Resurrection Remix Rom
    Boot into recovery
    Flash ResurrectionRemix Rom
    Format Data
    First boot may take up to 10 minutes.



    rrdownload.png

    ROM Download


    rrsource.png


    Resurrection Remix Source


    rrthanks.png


    XDA Developers
    LineageOs Team
    AICP
    Crdroid
    AOSIP
    DU
    Xtended
    Evolution X
    Bliss
    Omni Team
    And Of Course To All The Supporters, Donators And Users
    Join our Telegram channel : https://t.me/resurrectionremixchat


    rrbugs.png


    If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.

    Download the MatLog app from the Play Store.
    After downloading the MatLog app, go to the app settings, and change the log level to Debug.
    Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
    Copy and paste the entire log either to Hastebin or Pastebin
    Save the log, and copy and paste the link into the thread with a brief description of the error.



    rrsocial.png




    XDA:DevDB Information
    [ROM][10]Resurrection-Remix Official[surya][karna], ROM for the Xiaomi Poco X3 NFC

    Contributors
    Lostark13, mahajant99
    Source Code: https://github.com/lostark13/device_xiaomi_surya

    ROM OS Version: Android 10
    ROM Kernel: Linux 4.x
    ROM Firmware Required: V12.0.9 (surya),V12.0.10(karna)
    Based On: LOS

    Version Information
    Status:
    Stable
    Current Stable Version: 3
    Stable Release Date: 2020-10-13

    Created 2020-10-13
    Last Updated 2021-6-10
    18
    Reserved

    13 November 2020 Update
    -Added Support For Karna (Poco X3 Indian Variant)
    -Synced With Latest Rom Source Changes
    -Fixed Battery Overlays
    -Under The Hood Changes

    10 December 2020 Update
    -FIxed 5Ghz WiFi
    -Fixed 4K Record
    -Fixed FM
    -Added FPS Toggle
    -Fixed HDR
    -Old Stereo Sound
    -Unified Build

    12 December 2020 Update
    -Fixed Yellow Tint At Boot
    -Fixed Notification Light
    -Address Some Sepolicy Denials
    -Synced With Latest Rom Source Change

    27 December 2020 Update
    -Fixed Charging LED
    -Fixed Wifi Display/CAST
    -Fixed Sound Recording After 2 Seconds
    -Added Smart Charging
    -Added RR Wallpapers
    -Vanilla Build (No More Gapps Version)

    23 January 2021 Update
    -Fixed Vowifi
    -Fixed Selinux Status In Trust
    -Added Power Profile For Karna From MIUI 12.0.8
    -Added Clear Speaker In Parts
    -Force Tripple Frame Buffer

    10 June 2021 Update
    -Shipped With Cannon Kernel v2
    -Added Touch/Gaming Profiles
    -Latest Source Synced

    Note-Need Clean Flash For Vanilla Build If Coming From Gapps Version.
    8
    Did you manage to make Portrait shots and 64MP features work?

    Download these modules from camera.aeonax.com:

    • ANXFrameworkUnity_190.BountifulDistantHapuka
    • ANXCameraUnity_190.BountifulDistantHapuka
    • ANXCameraHotfix.190.BootloopFix

    Install it via magisk
    Give all permissions manually to anxcam

    Install ANX Pro from Play Store and change values

    Portrait fix: 'Portrait Lighting Back' = false
    Front cam fix: 'Hand Gestures' = false

    NOTE: Only A10 is supported for now
    6
    Hm..
    At least he's still alive. His GitHub acc is still active.

    @Lostark13
    Can you give us some news?
    Thanks
    I Will Definately Update The Rom When There's A Major Update In Source Side
    5
    Just in, new update

    New Build for surya available
    RROS-Q-8.6.7-20210303-surya-Official.zip

    FileSize: 792 MB
    SHA256: a5a12d3e465b689877e85d7322626218db8ef937aa4b7dee3eb00dc719d79773

    Edit: just flashed th update. Led light seems to be fine. Flickering screen while turn on/off is gone.

    The RR surya team is fantastic.