Development [ROM] [11.0.0] [alioth/aliothin] ArrowOS 11.0 [OFFICIAL] [CLOSED]

Search This thread

drjayesh80

Member
Dec 8, 2020
7
0
Hii this is the perfect rom.. Enjoying it..
Only thing which I hope is solved..
1 color temperature is on warm side.. Can we made it cool.. It gives a lot of yellow tint in white.. As if blue filter is applied..
Please developer look into it... I heard a lot about you.. I am sure you will solve my problem
 
Aug 8, 2015
22
2
Bogota
Really need in-pocket mode as my phone constantly wakeup and get wrong pin input, lock me out when I check it.
And the charging speed is 13W for me atm. Not a big deal but will much appreciate the update.
BTW, hugeeee thanks to devs

I was having the same issue in my pocket so I disabled double tap to wake and it doesn't happen anymore l, as pressing the unlock button while in the pocket is much harder than having the screen get tapped unknowingly.
 

iWindowz

Member
Jun 14, 2015
8
8
I've been using the ROM for a few weeks and it works perfectly, except for that I get random reboots when the phone is asleep and connected to a 5Ghz WiFi network. These restarts do not happen when a 2.4Ghz network is used.
 

rogcustom

Member
Jun 20, 2021
10
1
Is there instructions/tutorials to install magisk? My bank apps wont open and i dont want to brick my device 😁 thx!
 
Guy's, I'm really desperate about this.

I've been trying to use ArrowOS as my daily driver, but I simply can't get it working properly.

I've tried several combinations and every one of them results in the same issue: random crashes/reboots every 2-3 minutes after every boot.

Every time I've tried to use ArrowOS, I flash an stock MIUI rom, and on top of that I flash ArrowOS with the given instructions.

This last time (20 mins ago) I installed the fastboot version of "alioth_global_images_V12.5.1.0.RKHMIXM_20210517.0000.00_11.0_global_35202c0d4e.tgz" and on top of it, I just follow the OP instructions to flash ArrowOS (Arrow-v11.0-alioth-OFFICIAL-20210618-GAPPS.zip), and EVERY SINGLE TIME it boots into the OS, and it crashes/reboots on the WiFi selector setup. EVERYTIME!!! (no matter what base MIUI chose to clean flash first, this ALWAYS happens).

After that, the phone reboots and it let me finish the initial setup, but after IDK, 2-3 minutes, it crashes/reboots and so on.

The only "modifications" that I make every time is "disable dark mode" and change the style of the theme (via its own launcher options).

I really don't know what else I can do in order to make this rom works properly.

I also tried flashing the latest stable firmware (fw_alioth_miui_ALIOTH_V12.5.4.0.RKHCNXM_036218a01e_11.0.zip) to see if it makes any difference, but nope, the phone behaves the same.

As I said, EVERT F TIME I flash this rom, I clean flash an stock MIUI rom, and EVERY TIME I end up with the same results.

My phone works flawlessly with any other custom rom (I've tried Havoc, Pixel and .eu), only with this rom this happens.

Can anyone PLEEEEEEEEASE help me solve this issue? I really want to get this as my daily driver, but I don't know what else I can do. =(

While I was typing this (on my PC), the phone restarted 4 times, that's not normal. D=

Please please someone help me out.

Edit: I attach a logcat link: https://we.tl/t-k4xejFYESo
 
Last edited:

keyoke87

Senior Member
Jun 30, 2014
290
153
OnePlus 8T
Apple iPhone 12
I feel the standby drain isnt that good though.. Drop 7 percent overnight... Miui drops 2 percent overnight... Hope can be improved...

Got a 20th June build. Seems like there are charging info fix and other fixes...
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 88
    logo.png

    ArrowOS

    ABOUT
    ArrowOS
    is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.

    Website: https://arrowos.net
    Telegram: Channel | Chat
    Github: https://github.com/ArrowOS
    Code Review: review.arrowos.net
    E-mail: arrowos.contact
    PayPal: Donate to me
    Blog: blog.arrowos.net

    Installation instructions: Click here

    Checkout more documentation at (maintainership/contributing): Check this out

    WHAT WORKS?
    • Almost everything

    WHAT DOESN'T WORK?
    • You tell me
    Be sure to include a log : check how to

    DOWNLOADS
    Click here to Download
    Tip: Select OEM -> Device,choose Arrow version, choose build type: "GAPPS" or "VANILLA" to download.
    Read our blog article/post about:
    * GAPPS and VANILLA variants
    * Checking build integrity

    XDA:DevDB Information
    ArrowOS 11.0, ROM for POCO F3 / Redmi K40 / Mi 11x

    Contributors
    palaych
    Source Code: https://github.com/ArrowOS
    Kernel Code: https://github.com/ArrowOS-Devices/android_kernel_xiaomi_alioth

    ROM OS Version: Android 11
    ROM Kernel: Linux 4.x
    ROM Firmware Required: MIUI R
    Based On: AOSP
    59
    INSTALLATION PROCEDURE:

    First installation (Clean flash):


    You need adb/fastboot tools.
    Download boot, vendor_boot and rom zip:
    1. https://drive.google.com/file/d/1o-4T4hfEtxECIss-DVSSYAM1Kvy2iDN9/view?usp=sharing
    2. https://drive.google.com/file/d/1PgtI8bOV1yjmTZJ7euP6xDFzMszY6AXb/view?usp=sharing
    3. https://arrowos.net/download/alioth

    Reboot in fastboot. Flash arrowos recovery (boot.img and vendor_boot.img):

    fastboot flash boot_ab boot_alioth.img fastboot flash vendor_boot_ab vendor_boot_alioth.img

    Reboot in ArrowOS Recovery:

    fastboot reboot recovery

    Make format data (Factory reset -> Format data).

    Flash ROM (Apply update -> Apply from ADB):


    adb sideload name.zip

    Follow what show on device, should be ... Step 1/2 -> 2/2, then flashing ended, can reboot device in system. (In cmdline: If the process succeeds the output will stop at 47% and report `adb: failed to read command: Success`. In some cases it will report `adb: failed to read command: No error` which is also fine!")

    If you want install separate gapps on vanilla buildtype, after flash ROM:

    Advanced -> Reboot to recovery

    Flash gapps (Apply update -> Apply from ADB):


    adb sideload name.zip

    __________________________________________________

    Install Update (dirty flash):

    Go in Settings -> System -> Updater


    Downlad new build -> Install

    Device will automatically download, reboot into recovery and install a new build.

    _______________________________________________________


    Also you can use TWRP. Can find info in theme:
    CLICK HERE

    ___________________________________________________


    My official telegram group: CLICK HERE
    21
    Update 2021-09-11

    Device changelog:
    • - Remove qti telephony injection (Fix SIM-Switcher)
    • - sepolicy: Address denials
    • - rootdir: Disable sched_walt_rotate_big_tasks
    • - Build with Clang 13.0.1
    • - media: Sync configs with CAF
    • - audio: Sync configs with CAF
    • - proprietary-files: Restore all vibrator firmware
    • - proprietary-files: Unpin Display blobs
    • - Convert CarrierConfig overlays into RRO
    • - rro_overlays: {Wifi,Tethering}Overlay: Move to vendor
    • - Import full QTI Codec2 HAL and switch to Codec2 by default
    • - libinit: Switch to walleye oreo build fingerprint
    • - Misc fixes and upstream changes.

    Kernel changelog:
    • - Merge branch android-4.19-stable android kernel common
    • - Merge CAF tag "LA.UM.9.12.r1-12800.01-SMxx50.QSSI12.0"
    • - cpu-boost: Rework
    • - Misc fixes and upstream changes.

    ROM changelog: https://arrowos.net/changelog.php

    Installation instruction: https://xdaforums.com/t/rom-11-0-0-...os-11-0-official-weekly.4279481/post-85045261

    Download: https://arrowos.net/download/alioth

    Note:
    - Don't use fw 12.5.3.0 Global/India or China 12.5 Enhanced! (Use previous, example 12.5.2.0 Global)

    P.S. My personal Telegram support chat: https://t.me/mipa_lab
    19
    I've been using this ROM for a few weeks and it's great but I noticed a couple of things and have tried to fix them.

    The phone doesn't always go into full suspend mode because there's an misconfigured interrupt from the always on processor.
    This should fix it:
    https://github.com/dzo/android_kernel_xiaomi_alioth/commit/7ee79cda883ec09c69ba03d18d1be34291077442


    The display doesn't go into low power mode when the always on display is enabled. There's also a clock with the wrong name in the device tree.
    Here's a quick fix for both those things:
    https://github.com/dzo/android_kernel_xiaomi_alioth/commit/8ac729b52ea721a419b5dd7f21eaa829675b925b

    Attached is a zip containing a new boot.img and also a new dtbo.img, the dtbo isn't really necessary but I updated it to match the panel settings in the stock MIUI tree. In a dark room, the always on display might be quite bright but it's actually using less power than it used to.

    You can check the power usage with the display off by connecting adb over wifi and looking for lines like this in the kernel messages:

    <12>[ 309.495162] healthd: battery l=78 v=4129 t=31.5 h=2 st=3 c=40039 fc=4568000 cc=14 chg=

    It's the c= number that's important, this is the power consumption. With the display off it's about 17K, with the display in low power mode it's about 40K and without my fixes it was over 100K with AOD on.

    flash from fastboot (not recovery) with:

    fastboot flash boot boot.img
    fastboot flash dtbo dtbo.img

    This boot.img is patched with magisk, has root and should pass safetynet.

    You can also try the kernel out using:

    fastboot boot boot.img

    Unplug usb quickly after it says it's booting or it will just show a charging icon. This won't modify your system, just reboot to go back to the original kernel.

    All this should be quite stable but because the system wasn't previously going into suspend it might show up other bugs in some drivers. Use at your own risk!
    19
    Update 2021-07-24
    Device changelog:
    • - parts: Add High Touch Polling Rate support
    • - Update blobs to V12.5.2.0.RKHMIXM
    • - Update config DisplayCutout to MIUI V12.5.2.0
    • - Update QDCM calibration configs to MIUI V12.5.2.0 and switch smart_MC1 by default mode
    • - Update WCNSS config to MIUI V12.5.2.0
    • - Remove SmartCharging
    • - Add missed audio props
    • - overlay: Return COLOR_MODE_SATURATED
    • - Remove unused jars and libs
    • - Kernel: Update display panel configuration to MIUI V12.5.2.0
    • - Kernel: fixes for freq table
    • - Misc fixes and upstream changes.

    ROM changelog: https://arrowos.net/changelog.php

    Installation instruction: https://xdaforums.com/t/rom-11-0-0-...os-11-0-official-weekly.4279481/post-85045261

    Download: https://arrowos.net/download/alioth