[ROM] [11.0.0] ArrowOS POCO X3 [OFFICIAL][SURYA][UNIFIED]

Search This thread

superboma

Member
Sep 22, 2015
20
7
guys , i'm still using miui 12.0.3 with android 10, so should i update to android R first before flashing this rom or what ?
 

GANFORXDA

Member
Jun 8, 2021
8
0
@GANFORXDA No issues here.

Maybe a bad cable or charger? Try to reboot and check if the USB port is clean.
Thanks,but onetime the usb meter show max 27w(ori),ampere app show roughly 4000mah,usually 14-15w,the os is 20210708. before this happen,the usb meter show 14-15w,stop,again 14-15w stop again,and repeat until the phone stop using usb pd protocol,the phone switch to no fast charging mode.
 

Vega56

Senior Member
guys , i'm still using miui 12.0.3 with android 10, so should i update to android R first before flashing this rom or what ?

Fresh install coming from MIUI
  • Flash latest available MIUI 11 if you aren't on it already.
  • Install any suitable recovery (mentioned below).
  • Download and copy arrow build to a OTG prendrive or sd card.
  • Flash latest Arrow Vanilla/Gapps build.
  • FORMAT DATA. (You'll loose all your data!)
  • Reboot.
 

pirx666

Senior Member
Oct 28, 2014
82
14
Fresh install coming from MIUI
  • Flash latest available MIUI 11 if you aren't on it already.
  • Install any suitable recovery (mentioned below).
  • Download and copy arrow build to a OTG prendrive or sd card.
  • Flash latest Arrow Vanilla/Gapps build.
  • FORMAT DATA. (You'll loose all your data!)
  • Reboot.

Is this really MIUI 11? Or should this be latest Android 11 MIUI?
 

pirx666

Senior Member
Oct 28, 2014
82
14
Can someone tell me about what it means that quick charge will be discontinued? I always thought this is chipset feature and not something in software?
 

atefbeldi

Member
Apr 17, 2016
9
1
Xiaomi Poco X3 NFC
anyone else experiencing this strange error after 08/07 update ?
random apps force close / crash
also the device isn't detecting my SIM card
this only happens after installing Magisk !
but after restoring the original (not patched) boot.img the issues are gone and i can make calls and use SIM card ??
PS: i dirty flashed the update with TWRP because my /data is encrypted
 

Attachments

  • Screenshot_20210716-191242.png
    Screenshot_20210716-191242.png
    67.8 KB · Views: 68
  • Screenshot_20210716-190958.png
    Screenshot_20210716-190958.png
    121.3 KB · Views: 68
  • Screenshot_20210716-190934.png
    Screenshot_20210716-190934.png
    247.5 KB · Views: 70

CherryFarmer8

Senior Member
Aug 4, 2017
110
11
Xiaomi Poco X3 NFC
anyone else experiencing this strange error after 08/07 update ?
random apps force close / crash
also the device isn't detecting my SIM card
this only happens after installing Magisk !
but after restoring the original (not patched) boot.img the issues are gone and i can make calls and use SIM card ??
PS: i dirty flashed the update with TWRP because my /data is encrypted
I got the same problem back few days ago, random app crashing, apps not opening and wallpaper automatically changed to black, and after reboot the phone goes on bootloop and twrp cannot decrypt the data. So i did a full clean install and got the issue fixed. Didn't know what caused it in the first place.
 

CherryFarmer8

Senior Member
Aug 4, 2017
110
11
Xiaomi Poco X3 NFC
I'm having weird charging issues...my phone charged to 92% and just keeps saying it's charging but when I look 10 mins later it's like on 91%....I'm using original 33w charger & cable, I've only had this issue since flashing this rom....was fine on stock miui :/
From which MIUI version you flashed the ROM ?
You have to had latest MIUI version available for your device.
(Forgive my English)
 

shootomanUK

Senior Member
Jun 6, 2010
116
39
From which MIUI version you flashed the ROM ?
You have to had latest MIUI version available for your device.
(Forgive my English)
i was on miui V12.0.1.0.RJGMIXM
I switched the phone off and charged it 100%....I then switched phone on and discharged phone to 90% and plugged charger in and seems to be working now.

Not sure if it is a bug or something....also would like to see the Devs fix the misreporting of the on-screen charging current etc....as mine says charging slowly with the 33w fast charger.
 

Noei

Member
Jun 22, 2013
7
2
Xiaomi Redmi 6A
Xiaomi Redmi 8
Using 8/7/2021 gapps build.

The OTG seems not working. Used the same adapter on other devices it works.

anyone got same problem? and is there any temporary workaround? my PC just corrupted and need to use this ISO to USB app.

any help thanks.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 79
    logo.png

    ArrowOS

    ABOUT
    ArrowOS
    is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.

    Website: https://arrowos.net
    Telegram: Channel | TG Portal/Links
    Github: https://github.com/ArrowOS
    Code Review: review.arrowos.net
    E-mail: arrowos.contact
    PayPal: Donate to us
    Blog: blog.arrowos.net

    Checkout more documentation at (maintainership/contributing): Check this out

    WHAT WORKS?
    • Almost everything

    WHAT DOESN'T WORK?
    • You tell me
    Be sure to include a log : check how to

    DOWNLOADS
    POCO X3 (NFC) (surya/karna)

    Note: These are enforcing builds. Safety net checks pass out of the box! No need to flash magisk modules, which might in turn break the integrity!

    Builds have been unified now under surya codename for both NFC and non-NFC variants

    Tip: Select OEM -> Device,choose Arrow version, choose build type: "GAPPS" or "VANILLA" to download.

    Latest Instructions for OSS builds (w.e.f 10/05/2021)
    If migrating from pre OSS builds
    • Flash the latest available MIUI 11 firmware. (Flash global or any if you can't find your region)
    • Download and copy arrow build to a OTG prendrive or sd card.
    • Now flash Arrow Vanilla/Gapps build.
    • FORMAT DATA. (You'll loose all your data!)
    • Reboot.
    Fresh install coming from MIUI
    • Flash latest available MIUI 11 if you aren't on it already.
    • Install any suitable recovery (mentioned below).
    • Download and copy arrow build to a OTG prendrive or sd card.
    • Flash latest Arrow Vanilla/Gapps build.
    • FORMAT DATA. (You'll loose all your data!)
    • Reboot.
    TWRP Recovery by @brigudav :
    Note: This build of twrp will support decryption on ArrowOS OSS builds.

    ArrowOS Recovery :
    Note: This is a very basic aosp recovery only intended for OTA installs. Do NOT expect other functionalities.​
    * Do not use with DFE or while unencrypted.​
    F.A.Q :

    1. My WiFi, bluetooth and network aren't working after updating to OSS build?
    A. This happens if you're still on the old Q firmware. Flash the latest available R firmware and then follow the above give steps to properly flash the rom.​

    2. Unable to update OTA's using TWRP?
    A. The current available recoveries are outdated and are no longer supported for OSS builds. To have a hassle free OTA experience use the above mentioned ArrowOS recovery.
    A. Two of the currently supported recoveries are mentioned above.​

    Read our blog article/post about:
    * GAPPS and VANILLA variants
    * Checking build integrity

    ROM Source: https://github.com/ArrowOS
    Kernel Source: https://github.com/ArrowOS-Devices/android_kernel_xiaomi_surya

    XDA:DevDB Information
    ArrowOS, ROM for the Xiaomi Poco X3 NFC

    Contributors
    ganesh varma, kubersharma, palaych
    Source Code: https://github.com/ArrowOS

    ROM OS Version: Android 11
    ROM Kernel: Linux 4.x
    ROM Firmware Required: Latest R firmware
    Based On: AOSP, CAF

    Version Information
    Status:
    Stable
    Stable Release Date: 2020-11-19

    Created 2020-11-19
    Last Updated 2021-05-18
    16
    Hello.

    Does anyone have any working TWRP for Surya model ?

    I see that the developer Brigudav seems to have given up on developing TWRP for Surya.

    TWRP by Brigudav Official website

    So is there any replacement ?

    Thank you very much.
    Update -09
    14
    So i haven't been around here for a while, after looking at the recent posts many seem to be confused, blaming and do not understand on migrating to OSS builds. In the final MIUI vendor builds the OTA functionality was blocked in order to prevent users from directly updating to OSS builds as it will be needing a MIUI 11 firmware followed by a clean flash. The same has been notified in our device changelogs. Every step and preventive measures have been taken, there's only much i can do from my side in clearing things up. We have this forum and community in place to help each other out, so lets not be pointing fingers here!

    Here again i would like to make it clear with a simple guide on how to migrate onto OSS build!

    Note: This update will require a CLEAN FLASH (format data), so please backup everything beforehand.
    • Flash the latest available MIUI 11 firmware. (Region doesn't matter!!)
    • Now flash Arrow Vanilla/Gapps build.
    • FORMAT DATA. (You'll loose all your data!)
    • Reboot.
    Beware that the current available recoveries haven't been updated yet to support decryption for OSS builds at this point.
    13
    Here are the instructions on how you should flash the new OSS Vendor ROM since most people here are confused:

    - Flash latest TWRP by brigudav
    - Flash Android 11 12.0.7 MIUI firmware
    - Reboot recovery
    - Format Data
    - Reboot recovery
    - Flash ArrowOS

    OPTIONAL:
    - Flash Magisk
    - Flash Gapps (If you're on Vanilla build & If you want custom gapps)

    - Reboot system

    Download link:
    - Firmware: https://xiaomifirmwareupdater.com/firmware/surya/stable/V12.0.7.0.RJGEUXM/
    - TWRP: You can find it on 4pda but you need an account. I'm not allowed to share it, so you have to get it yourself.

    This firmware is for NFC model as I'm not sure where is A11 firmware for non-NFC model. It can possibly work for non-NFC model, feel free to try.
    10
    Mission Impossible in all custom ROMs !

    1. Safetynet check the bootloader status and will automatically fail if magisk is not installed (Magisk Hide ON must be applied for this) !

    2. Furthermore, now you have to install the safetynet-fix module to make your banking apps working !

    3. Finally, you must hide Magisk Manager.apk with a random name too (Magisk Settings)
    To everyone, please STOP this misconception about having the need to flash magisk in order to pass safety net. Do read the OP I've clearly mentioned there's no need of a magisk or modules for safety net. Device is certified and passes safety net out of the box without need of any modifications.

    By improper usage of magisk and mods you're further complicating and breaking things when they're completely unnecessary which end up causing unrelated issues which you end up calling them rom source bugs ¯\(◉‿◉)/¯

    P.S : I'm not against magisk, but when you do prefer using modifications do ask yourself on your needs and if you're able to rectify the issues it might generate. Isolate yourself from magisk or any form of modifications to recheck and confirm the issue before making a bug report.