• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM] [11.0.0] ArrowOS POCO X3 [OFFICIAL][SURYA][UNIFIED]

Search This thread

gorillaz_gr

Senior Member
yesterday i tried to flash this rom, coming from 12.5.1 global miui. I was not able to boot the gapps variant of the rom, however i was able to boot vanilla variant, here are the steps i followed, can someone help me identify the issue why gapps variant did not boot or was i too quick to assume its stuck?
.......
attempt 4:
then i went back to recovery and flashed firmware+vanilla+gapps>format data>yes>reboot>boot within a minute.

Does the gapps variant take this much time to first boot as compared to vanilla? or did i miss something?

yes the "GAPPS included, version" does take a lot of more time for the 1st boot, I don't remember if it was more than 10 minutes , but it took yes.

you don't have to flash every time the firmware from XIAOMI (do you use global , European or the Indian version?)

I guess you download the correct version of ArrowOS, I mean the Official one , and not the Experiments?
and personaly I don't use the "add more zip" option in TWRP, it seems every time something goes wrong. After I install something with TWRP, I then reboot to TWRP again, and istall the second .zip

(which GAPPS version do you use? OpenGapps, FlameGapps, NikGapps?)
 

nike1973

Senior Member
May 17, 2012
68
1
Hello, which kernel is recommended to install it with the Arrow rom, do I require a lot of battery, also they recommended me to install magisk GMS Doze modules or Deep Sleep Enhancement is it necessary with this rom? Thank you so much.
 

khantastic

Senior Member
Jan 12, 2011
782
341
Xiaomi Poco X3 NFC
Xiaomi Poco F3
yes the "GAPPS included, version" does take a lot of more time for the 1st boot, I don't remember if it was more than 10 minutes , but it took yes.

you don't have to flash every time the firmware from XIAOMI (do you use global , European or the Indian version?)

I guess you download the correct version of ArrowOS, I mean the Official one , and not the Experiments?
and personaly I don't use the "add more zip" option in TWRP, it seems every time something goes wrong. After I install something with TWRP, I then reboot to TWRP again, and istall the second .zip

(which GAPPS version do you use? OpenGapps, FlameGapps, NikGapps?)
thanks for confirming that it takes longer time to first boot with 'gapps included version'.

1. i downloaded the official version, of vanilla as well as gapps_included_version.
2. ok i think this add more zip option in twrp could have played its part, so next time i will reboot to recovery before flashing next zip.
3. with vanilla i used FlameGapps_full and the vanilla version worked fine.

Edit:
also, a few times (not very frequent) I have also seen system UI has stopped error message. I am using vanilla with FlameGapps.
 

wurst_wasser

Senior Member
Dec 21, 2012
91
8
about Bluetooth: try to go to developer settings and enable the setting (in English): disable absolute volume

about alarm clock: it seems that after an update from Google, there are a few problems with google clock, many people around the world , never woke up to go for work!!! I don't use it , so I can not be sure, I always use another clock from PlayStore.
I tried changing the absolute volume setting but it does not change anything... Still, thanks for the idea, mate...
 

gorillaz_gr

Senior Member

Attachments

  • Screenshot_20210918-141530.png
    Screenshot_20210918-141530.png
    148.6 KB · Views: 75
  • Like
Reactions: adikfrees

wCk32d7

Member
Jun 22, 2021
47
10

luke96

Hello

Really?

That would be great :)

Do you know if the latest build has any problems ?

I'm quite afraid to update when the build came out only yesterday :)

Thank you.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Updated 11/11

    Changelog:
    • November security patch
    • Hotspot WPA3 Settings
    • base: PixelPropsUtils: Update redfin fp to SP1A.211105.003
    • Update translations from community
    • For Quicksilver Kernel changelog see this (https://github.com/ghostrider-reborn/android_kernel_xiaomi_surya/commits/staging/LA.UM.9.x)
    • Misc fixes and upstream changes
    1
    No. Clean flash is a must. And latest brigudav TWRP which has working A12 encryption.
    Ouch! I don't really look forward to a clean flash, it's my daily driver and some secure apps don't really like it (they think it's a different device), but I might try it sometime in the near future.

    Is there any list of known issues? Something to be especially aware of?

    Also, as far as I understood from another thread, the latest brigudav's TWRP only works if no PIN / Password is set? Hopefully we'll get a fully working version soon.
    1
    Does anyone have snapchat show up as an option when sharing stuff?
    I've never even had snapchat, it's not installed...nothing... it's very weird
    Screenshot_20211110-015105.png



    I have just seen that there are A12 official builds on the website... are there news on this that I have missed?

    What is the status? Can it be flashed dirty over A11? I know TWRP might be an issue, but what other problems can be expected?
    There's a thread for arrow 12
    1
    Double post sry
    1
    Flashed it yesterday, coming from MIUI 12.5. Love it. So nice that the mi sound enhancer option is still there! Works smooth. Only bug I noticed is the screen flickering when the brightness is set to manual on the lowest option. Thank you very much for maintaining this rom. I will update to 12 when its official :)
  • 76
    logo.png

    ArrowOS

    ABOUT
    ArrowOS
    is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.

    Website: https://arrowos.net
    Telegram: Channel | TG Portal/Links
    Github: https://github.com/ArrowOS
    Code Review: review.arrowos.net
    E-mail: arrowos.contact
    PayPal: Donate to us
    Blog: blog.arrowos.net

    Checkout more documentation at (maintainership/contributing): Check this out

    WHAT WORKS?
    • Almost everything

    WHAT DOESN'T WORK?
    • You tell me
    Be sure to include a log : check how to

    DOWNLOADS
    POCO X3 (NFC) (surya/karna)

    Note: These are enforcing builds. Safety net checks pass out of the box! No need to flash magisk modules, which might in turn break the integrity!

    Builds have been unified now under surya codename for both NFC and non-NFC variants

    Tip: Select OEM -> Device,choose Arrow version, choose build type: "GAPPS" or "VANILLA" to download.

    Latest Instructions for OSS builds (w.e.f 10/05/2021)
    If migrating from pre OSS builds
    • Flash the latest available MIUI 11 firmware. (Flash global or any if you can't find your region)
    • Download and copy arrow build to a OTG prendrive or sd card.
    • Now flash Arrow Vanilla/Gapps build.
    • FORMAT DATA. (You'll loose all your data!)
    • Reboot.
    Fresh install coming from MIUI
    • Flash latest available MIUI 11 if you aren't on it already.
    • Install any suitable recovery (mentioned below).
    • Download and copy arrow build to a OTG prendrive or sd card.
    • Flash latest Arrow Vanilla/Gapps build.
    • FORMAT DATA. (You'll loose all your data!)
    • Reboot.
    TWRP Recovery by @brigudav :
    Note: This build of twrp will support decryption on ArrowOS OSS builds.

    ArrowOS Recovery :
    Note: This is a very basic aosp recovery only intended for OTA installs. Do NOT expect other functionalities.​
    * Do not use with DFE or while unencrypted.​
    F.A.Q :

    1. My WiFi, bluetooth and network aren't working after updating to OSS build?
    A. This happens if you're still on the old Q firmware. Flash the latest available R firmware and then follow the above give steps to properly flash the rom.​

    2. Unable to update OTA's using TWRP?
    A. The current available recoveries are outdated and are no longer supported for OSS builds. To have a hassle free OTA experience use the above mentioned ArrowOS recovery.
    A. Two of the currently supported recoveries are mentioned above.​

    Read our blog article/post about:
    * GAPPS and VANILLA variants
    * Checking build integrity

    ROM Source: https://github.com/ArrowOS
    Kernel Source: https://github.com/ArrowOS-Devices/android_kernel_xiaomi_surya

    XDA:DevDB Information
    ArrowOS, ROM for the Xiaomi Poco X3 NFC

    Contributors
    ganesh varma, kubersharma, palaych
    Source Code: https://github.com/ArrowOS

    ROM OS Version: Android 11
    ROM Kernel: Linux 4.x
    ROM Firmware Required: Latest R firmware
    Based On: AOSP, CAF

    Version Information
    Status:
    Stable
    Stable Release Date: 2020-11-19

    Created 2020-11-19
    Last Updated 2021-05-18
    16
    Hello.

    Does anyone have any working TWRP for Surya model ?

    I see that the developer Brigudav seems to have given up on developing TWRP for Surya.

    TWRP by Brigudav Official website

    So is there any replacement ?

    Thank you very much.
    Update -09
    14
    So i haven't been around here for a while, after looking at the recent posts many seem to be confused, blaming and do not understand on migrating to OSS builds. In the final MIUI vendor builds the OTA functionality was blocked in order to prevent users from directly updating to OSS builds as it will be needing a MIUI 11 firmware followed by a clean flash. The same has been notified in our device changelogs. Every step and preventive measures have been taken, there's only much i can do from my side in clearing things up. We have this forum and community in place to help each other out, so lets not be pointing fingers here!

    Here again i would like to make it clear with a simple guide on how to migrate onto OSS build!

    Note: This update will require a CLEAN FLASH (format data), so please backup everything beforehand.
    • Flash the latest available MIUI 11 firmware. (Region doesn't matter!!)
    • Now flash Arrow Vanilla/Gapps build.
    • FORMAT DATA. (You'll loose all your data!)
    • Reboot.
    Beware that the current available recoveries haven't been updated yet to support decryption for OSS builds at this point.
    13
    Here are the instructions on how you should flash the new OSS Vendor ROM since most people here are confused:

    - Flash latest TWRP by brigudav
    - Flash Android 11 12.0.7 MIUI firmware
    - Reboot recovery
    - Format Data
    - Reboot recovery
    - Flash ArrowOS

    OPTIONAL:
    - Flash Magisk
    - Flash Gapps (If you're on Vanilla build & If you want custom gapps)

    - Reboot system

    Download link:
    - Firmware: https://xiaomifirmwareupdater.com/firmware/surya/stable/V12.0.7.0.RJGEUXM/
    - TWRP: You can find it on 4pda but you need an account. I'm not allowed to share it, so you have to get it yourself.

    This firmware is for NFC model as I'm not sure where is A11 firmware for non-NFC model. It can possibly work for non-NFC model, feel free to try.
    10
    Mission Impossible in all custom ROMs !

    1. Safetynet check the bootloader status and will automatically fail if magisk is not installed (Magisk Hide ON must be applied for this) !

    2. Furthermore, now you have to install the safetynet-fix module to make your banking apps working !

    3. Finally, you must hide Magisk Manager.apk with a random name too (Magisk Settings)
    To everyone, please STOP this misconception about having the need to flash magisk in order to pass safety net. Do read the OP I've clearly mentioned there's no need of a magisk or modules for safety net. Device is certified and passes safety net out of the box without need of any modifications.

    By improper usage of magisk and mods you're further complicating and breaking things when they're completely unnecessary which end up causing unrelated issues which you end up calling them rom source bugs ¯\(◉‿◉)/¯

    P.S : I'm not against magisk, but when you do prefer using modifications do ask yourself on your needs and if you're able to rectify the issues it might generate. Isolate yourself from magisk or any form of modifications to recheck and confirm the issue before making a bug report.