I didn't have any of that when I was using ArrowOS 11 back in August/September.
I also don't have any issues with my display running the current build of ArrowOS 12.
Which firmware are you using and did you clean flash ArrowOS 11?
[ROM] [11.0.0] ArrowOS POCO X3 [OFFICIAL][SURYA][UNIFIED]
- Thread starter ganesh varma
- Start date
I also don't have any issues with my display running the current build of ArrowOS 12.
Which firmware are you using and did you clean flash ArrowOS 11?
12.5.4 firmware. I've flashed Arrow right after miui fastboot ROM. I know a lot of Arrow OS A11 users who have the same issue with buggy adaptive brightness. It's 100% confirmed bug, but maintainer doesn't want to confirm that and do any attempts to fix it.
ArrowOS 12 is fully stable and doesn't have this bug.
I guess the old ROM won't get much support in the future, so it's time to move on.
Had problems when connecting a keyboard via otg. Worked fine in stock miui. Keyboard also worked with other phones including a poco x3 pro also on arrow os
I have recently discovered an issue where if I connect my wireless earphone(s), most of times it doesn't work properly. Sometimes, the earphone is connected but the songs keep playing in the speaker. Also, it frequently disconnects from BT and then reconnects. Tried with other phones but it doesn't happen. Can anyone help me with this issue?
WADR, I find that misleading -- it should take more than good will to prompt such big changes:
I might be just dumb and all but I just want to ask, my widevine suddenly downgrade from L1 to L3 (Safetynet still works phew) just want to ask if there's any fix to this? I'm fine with it just curious if there's a remedy, thanks for the grand work tho dev! Really loving the rom!
And we have no recovery that supports decryption yet. I'll make the move if that happens.
Firstly, thank you for this amazing rom. I've clean flashed the A11 Gapps build with the latest firmware 12.5.4.0.RJGMIXM but i see some stutters and touch issues while gaming. Other than that, the rom is super smooth. Is there anything i'm doing wrong?
If i download the vanilla build and flash Pico Gapps, will that pass safetynet without issue? Thanks in advance for your support to this device. Respect!
If i download the vanilla build and flash Pico Gapps, will that pass safetynet without issue? Thanks in advance for your support to this device. Respect!
I am having random reboots with the December version.
Do you know if I could dirty flash the latest Arrow A11 Unofficial?
sourceforge.net
Do you know if I could dirty flash the latest Arrow A11 Unofficial?
surya - Browse /Arrow at SourceForge.net
Revontheus
Senior Member
I would wait for the official release to be uploaded on the website.I am having random reboots with the December version.
Do you know if I could dirty flash the latest Arrow A11 Unofficial?
surya - Browse /Arrow at SourceForge.net
I've had screen flickering issues since last 3 arrow 11 updates. Is it fixed in latest update?
Revontheus
Senior Member
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
1
Ok, so first of all, the phone is not rejecting anything from the charger. The phone itself decides how much current goes into the battery, so no matter how powerful the charger is, the phone will just take what it needs, and the charger will simply supply that if it can. Notice that when your phone stops charging, the charger cools off, meaning, it's not putting out any power. Second, your touch issues are the result of a bad charger which has a lot of ripple at the output (extremely fast voltage fluctuation) and that's what's messing with your touch, the phone itself is perfectly fine. You need to either buy a higher quality charger or get another charger that came with some other phone as they're usually good when it comes to that. Whatever you do, don't buy a cheap charger as they can actually be dangerous. And when it comes to the battery, it doesn't care how often you charge it, 50 percent is pretty much the ideal state of charge. -
78
ArrowOS
ABOUT
ArrowOS is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Donate to us
Blog: blog.arrowos.net
Checkout more documentation at (maintainership/contributing): Check this out
WHAT WORKS?
- Almost everything
WHAT DOESN'T WORK?
- You tell me
DOWNLOADS
POCO X3 (NFC) (surya/karna)
Note: These are enforcing builds. Safety net checks pass out of the box! No need to flash magisk modules, which might in turn break the integrity!
Builds have been unified now under surya codename for both NFC and non-NFC variants
Tip: Select OEM -> Device,choose Arrow version, choose build type: "GAPPS" or "VANILLA" to download.
Latest Instructions for OSS builds (w.e.f 10/05/2021)
If migrating from pre OSS builds- Flash the latest available MIUI 11 firmware. (Flash global or any if you can't find your region)
- Download and copy arrow build to a OTG prendrive or sd card.
- Now flash Arrow Vanilla/Gapps build.
- FORMAT DATA. (You'll loose all your data!)
- Reboot.
Fresh install coming from MIUITWRP Recovery by @brigudav :- Flash latest available MIUI 11 if you aren't on it already.
- Install any suitable recovery (mentioned below).
- Download and copy arrow build to a OTG prendrive or sd card.
- Flash latest Arrow Vanilla/Gapps build.
- FORMAT DATA. (You'll loose all your data!)
- Reboot.
Note: This build of twrp will support decryption on ArrowOS OSS builds.
ArrowOS Recovery :
Note: This is a very basic aosp recovery only intended for OTA installs. Do NOT expect other functionalities.* Do not use with DFE or while unencrypted.F.A.Q :
1. My WiFi, bluetooth and network aren't working after updating to OSS build?
A. This happens if you're still on the old Q firmware. Flash the latest available R firmware and then follow the above give steps to properly flash the rom.
2. Unable to update OTA's using TWRP?
A. The current available recoveries are outdated and are no longer supported for OSS builds. To have a hassle free OTA experience use the above mentioned ArrowOS recovery.A. Two of the currently supported recoveries are mentioned above.
Read our blog article/post about:
* GAPPS and VANILLA variants
* Checking build integrity
ROM Source: https://github.com/ArrowOS
Kernel Source: https://github.com/ArrowOS-Devices/android_kernel_xiaomi_surya
XDA:DevDB Information
ArrowOS, ROM for the Xiaomi Poco X3 NFC
Contributors
ganesh varma, kubersharma, palaych
Source Code: https://github.com/ArrowOS
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest R firmware
Based On: AOSP, CAF
Version Information
Status: Stable
Stable Release Date: 2020-11-19
Created 2020-11-19
Last Updated 2021-05-181614So i haven't been around here for a while, after looking at the recent posts many seem to be confused, blaming and do not understand on migrating to OSS builds. In the final MIUI vendor builds the OTA functionality was blocked in order to prevent users from directly updating to OSS builds as it will be needing a MIUI 11 firmware followed by a clean flash. The same has been notified in our device changelogs. Every step and preventive measures have been taken, there's only much i can do from my side in clearing things up. We have this forum and community in place to help each other out, so lets not be pointing fingers here!
Here again i would like to make it clear with a simple guide on how to migrate onto OSS build!
Note: This update will require a CLEAN FLASH (format data), so please backup everything beforehand.
- Flash the latest available MIUI 11 firmware. (Region doesn't matter!!)
- Now flash Arrow Vanilla/Gapps build.
- FORMAT DATA. (You'll loose all your data!)
- Reboot.
13Here are the instructions on how you should flash the new OSS Vendor ROM since most people here are confused:
- Flash latest TWRP by brigudav
- Flash Android 11 12.0.7 MIUI firmware
- Reboot recovery
- Format Data
- Reboot recovery
- Flash ArrowOS
OPTIONAL:
- Flash Magisk
- Flash Gapps (If you're on Vanilla build & If you want custom gapps)
- Reboot system
Download link:
- Firmware: https://xiaomifirmwareupdater.com/firmware/surya/stable/V12.0.7.0.RJGEUXM/
- TWRP: You can find it on 4pda but you need an account. I'm not allowed to share it, so you have to get it yourself.
This firmware is for NFC model as I'm not sure where is A11 firmware for non-NFC model. It can possibly work for non-NFC model, feel free to try.10
To everyone, please STOP this misconception about having the need to flash magisk in order to pass safety net. Do read the OP I've clearly mentioned there's no need of a magisk or modules for safety net. Device is certified and passes safety net out of the box without need of any modifications.
By improper usage of magisk and mods you're further complicating and breaking things when they're completely unnecessary which end up causing unrelated issues which you end up calling them rom source bugs ¯\(◉‿◉)/¯
P.S : I'm not against magisk, but when you do prefer using modifications do ask yourself on your needs and if you're able to rectify the issues it might generate. Isolate yourself from magisk or any form of modifications to recheck and confirm the issue before making a bug report.
New posts
-
[OFFICIAL] [NIGHTLIES] LineageOS 17.1
- Latest: presupposecould
-
-
