D
[ROM] [11.0.0] ArrowOS POCO X3 [OFFICIAL][SURYA][UNIFIED]
- Thread starter ganesh varma
- Start date
No, and will not be fixed in feature for sure. There's no effective way to communicate with our maintainer. And he doesn't want to hear user's issues and fix them.
I had the same issue for a few minutes right after first boot to ROM. Then this issue disappeared. Another user suggested me to flash 12.5.1 Global firmware for fix it. I did and seems it helped.
Not necessarily to flash the ROM again. Just flash 12.5.1 firmware. That's it
I'm on arrow 12.. don't like it much.
It used to happen frequently enough to irritate me.
Just noticed that I can't access my usb flash drive using otg, the phone tries to " charge connected device ", I can't change the usb mode ... don't know if it's hardware or rom related, any ideas ? (latest arrow build and 12.5.4 global firmware)
(It was working a few weeks ago withe the same otg adapter and flash drive, used to backup apps with swift backup there for monthes)
edit : just tried a brand new usb otg adapter and another flash drive, same problem.
(It was working a few weeks ago withe the same otg adapter and flash drive, used to backup apps with swift backup there for monthes)
edit : just tried a brand new usb otg adapter and another flash drive, same problem.
Last edited:
Guys i tried default messages app and google messages app but when i take a sms it doesn't pop up. Is there any fix?
I've flashed 12.5.1 fw after installation of Arrow OS A11. Did a reboot twice and was glad that screen flickering issue didn't appear. But yesterday I had to reboot about 6 times, and noticed that flickering again. So 12.5.1 firmware doesn't solve flickering issue.
Yeah. Just sometimes happen, but if you repeat OTA updates goes normally again.
Guys, i have a question about the arrowOS update policy! An update is displayed in the changelog today. However, when I press the update button in the settings menu, it says there is no update available! How can that be?
Updates are published on the website first and the OTA updates are made available a little later.Guys, i have a question about the arrowOS update policy! An update is displayed in the changelog today. However, when I press the update button in the settings menu, it says there is no update available! How can that be?
Less load for servers and bandwidth
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
1
Ok, so first of all, the phone is not rejecting anything from the charger. The phone itself decides how much current goes into the battery, so no matter how powerful the charger is, the phone will just take what it needs, and the charger will simply supply that if it can. Notice that when your phone stops charging, the charger cools off, meaning, it's not putting out any power. Second, your touch issues are the result of a bad charger which has a lot of ripple at the output (extremely fast voltage fluctuation) and that's what's messing with your touch, the phone itself is perfectly fine. You need to either buy a higher quality charger or get another charger that came with some other phone as they're usually good when it comes to that. Whatever you do, don't buy a cheap charger as they can actually be dangerous. And when it comes to the battery, it doesn't care how often you charge it, 50 percent is pretty much the ideal state of charge. -
78
ArrowOS
ABOUT
ArrowOS is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Donate to us
Blog: blog.arrowos.net
Checkout more documentation at (maintainership/contributing): Check this out
WHAT WORKS?
- Almost everything
WHAT DOESN'T WORK?
- You tell me
DOWNLOADS
POCO X3 (NFC) (surya/karna)
Note: These are enforcing builds. Safety net checks pass out of the box! No need to flash magisk modules, which might in turn break the integrity!
Builds have been unified now under surya codename for both NFC and non-NFC variants
Tip: Select OEM -> Device,choose Arrow version, choose build type: "GAPPS" or "VANILLA" to download.
Latest Instructions for OSS builds (w.e.f 10/05/2021)
If migrating from pre OSS builds- Flash the latest available MIUI 11 firmware. (Flash global or any if you can't find your region)
- Download and copy arrow build to a OTG prendrive or sd card.
- Now flash Arrow Vanilla/Gapps build.
- FORMAT DATA. (You'll loose all your data!)
- Reboot.
Fresh install coming from MIUITWRP Recovery by @brigudav :- Flash latest available MIUI 11 if you aren't on it already.
- Install any suitable recovery (mentioned below).
- Download and copy arrow build to a OTG prendrive or sd card.
- Flash latest Arrow Vanilla/Gapps build.
- FORMAT DATA. (You'll loose all your data!)
- Reboot.
Note: This build of twrp will support decryption on ArrowOS OSS builds.
ArrowOS Recovery :
Note: This is a very basic aosp recovery only intended for OTA installs. Do NOT expect other functionalities.* Do not use with DFE or while unencrypted.F.A.Q :
1. My WiFi, bluetooth and network aren't working after updating to OSS build?
A. This happens if you're still on the old Q firmware. Flash the latest available R firmware and then follow the above give steps to properly flash the rom.
2. Unable to update OTA's using TWRP?
A. The current available recoveries are outdated and are no longer supported for OSS builds. To have a hassle free OTA experience use the above mentioned ArrowOS recovery.A. Two of the currently supported recoveries are mentioned above.
Read our blog article/post about:
* GAPPS and VANILLA variants
* Checking build integrity
ROM Source: https://github.com/ArrowOS
Kernel Source: https://github.com/ArrowOS-Devices/android_kernel_xiaomi_surya
XDA:DevDB Information
ArrowOS, ROM for the Xiaomi Poco X3 NFC
Contributors
ganesh varma, kubersharma, palaych
Source Code: https://github.com/ArrowOS
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest R firmware
Based On: AOSP, CAF
Version Information
Status: Stable
Stable Release Date: 2020-11-19
Created 2020-11-19
Last Updated 2021-05-181614So i haven't been around here for a while, after looking at the recent posts many seem to be confused, blaming and do not understand on migrating to OSS builds. In the final MIUI vendor builds the OTA functionality was blocked in order to prevent users from directly updating to OSS builds as it will be needing a MIUI 11 firmware followed by a clean flash. The same has been notified in our device changelogs. Every step and preventive measures have been taken, there's only much i can do from my side in clearing things up. We have this forum and community in place to help each other out, so lets not be pointing fingers here!
Here again i would like to make it clear with a simple guide on how to migrate onto OSS build!
Note: This update will require a CLEAN FLASH (format data), so please backup everything beforehand.
- Flash the latest available MIUI 11 firmware. (Region doesn't matter!!)
- Now flash Arrow Vanilla/Gapps build.
- FORMAT DATA. (You'll loose all your data!)
- Reboot.
13Here are the instructions on how you should flash the new OSS Vendor ROM since most people here are confused:
- Flash latest TWRP by brigudav
- Flash Android 11 12.0.7 MIUI firmware
- Reboot recovery
- Format Data
- Reboot recovery
- Flash ArrowOS
OPTIONAL:
- Flash Magisk
- Flash Gapps (If you're on Vanilla build & If you want custom gapps)
- Reboot system
Download link:
- Firmware: https://xiaomifirmwareupdater.com/firmware/surya/stable/V12.0.7.0.RJGEUXM/
- TWRP: You can find it on 4pda but you need an account. I'm not allowed to share it, so you have to get it yourself.
This firmware is for NFC model as I'm not sure where is A11 firmware for non-NFC model. It can possibly work for non-NFC model, feel free to try.10
To everyone, please STOP this misconception about having the need to flash magisk in order to pass safety net. Do read the OP I've clearly mentioned there's no need of a magisk or modules for safety net. Device is certified and passes safety net out of the box without need of any modifications.
By improper usage of magisk and mods you're further complicating and breaking things when they're completely unnecessary which end up causing unrelated issues which you end up calling them rom source bugs ¯\(◉‿◉)/¯
P.S : I'm not against magisk, but when you do prefer using modifications do ask yourself on your needs and if you're able to rectify the issues it might generate. Isolate yourself from magisk or any form of modifications to recheck and confirm the issue before making a bug report.
New posts
-
Development [STOCK][FULL-ROM] OxygenOS_11.3_A.20 EU DN2103 | Unbrick guide
- Latest: Sjak Philipsen
