[ROM] [11.0.0] ArrowOS POCO X3 [OFFICIAL][SURYA][UNIFIED]

Search This thread
By:
Advanced…
S

SebixWolf

Senior Member
Apr 4, 2021
50
2
I just installed the latest build and everything is working fine, I mean the boot is like ultra flash mode lol. I got an error 1 but I believe it was a corrupted OTA update that I got and booted me on fastboot mode.

I downloaded from the main page the update and made a dirty flash on TWPR 3.5.2 and now everything booted fine and working correctly.

I recommend syscomp that you tried that again and see if everything is fixed on your side.
 
V

Vega56

Senior Member
May 27, 2020
178
80
Xiaomi Poco F4 (Munch) / Redmi K40s
nike1973 said:
hi, i have xiaomi rom eu 12.5.1 can i install it directly or will i have any problem? thanks.
Click to expand...
Click to collapse

Fresh install coming from MIUI
  • Flash latest available MIUI 11 if you aren't on it already.
  • Install any suitable recovery (mentioned below).
  • Download and copy arrow build to a OTG prendrive or sd card.
  • Flash latest Arrow Vanilla/Gapps build.
  • FORMAT DATA. (You'll loose all your data!)
  • Reboot.
First Site :)
 
  • Like
Reactions: nike1973
s3xymo

s3xymo

Member
Aug 2, 2021
25
6
Hello so I recently flashed Arrowos only to realize that my previous MIUI 12.0.7 ROM was not in fact on the latest Android 11 firmware. Now I am stuck without Wifi and honestly am a bit lost. Asking for a friend here, what should my next steps be? Thanks in advance :')
 
SkaboXD

SkaboXD

Senior Member
Jan 18, 2017
1,132
445
Ganja
Xiaomi Poco X3 NFC
s3xymo said:
Hello so I recently flashed Arrowos only to realize that my previous MIUI 12.0.7 ROM was not in fact on the latest Android 11 firmware. Now I am stuck without Wifi and honestly am a bit lost. Asking for a friend here, what should my next steps be? Thanks in advance :')
Click to expand...
Click to collapse
Flash latest 12.5.1.0 firmware, reboot to recovery, flash latest ArrowOS, format data, wipe cache & dalvik cache, reboot to system.

Firmware: https://chuangtzu.ftp.acc.umu.se/mi...AGlobal_V12.5.1.0.RJGMIXM_e3b8205e7f_11.0.zip
 
  • Like
Reactions: keenan316, s3xymo and pnin
You must log in or register to reply here.

Similar threads

GtrCraft
[ROM][Android 14.0][SURYA] crDroid v10.2 [OFFICIAL][09-02]
Replies
2K
Views
346K
alksndb
alksndb
ganesh varma
[ROM] [12.0.0_r2] ArrowOS Poco X3 [BETA/EARLY RELEASE]
Replies
1K
Views
171K
J
jd_dpgc
gardiol
[ROM][10/12] LineageOS OFFICIAL [SURYA]KARNA]
Replies
2K
Views
270K
P
Pumpino
mauronofrio
[RECOVERY][3.4.0-15][surya]TWRP Xiaomi Poco X3
Replies
272
Views
133K
aj_mahtab
aj_mahtab
mahajant99
[RECOVERY][3.5.0-0][UNOFFICIAL] TWRP Xiaomi POCO X3 [surya][karna]
Replies
353
Views
124K
W
wilsonhlacerda

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 79
    ganesh varma
    ganesh varma
    logo.png

    ArrowOS
    ​

    ABOUT
    ArrowOS     is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.

    Website: https://arrowos.net
    Telegram: Channel | TG Portal/Links
    Github: https://github.com/ArrowOS
    Code Review: review.arrowos.net
    E-mail: arrowos.contact
    PayPal: Donate to us
    Blog: blog.arrowos.net

    Checkout more documentation at (maintainership/contributing): Check this out

    WHAT WORKS?
    • Almost everything

    WHAT DOESN'T WORK?
    • You tell me
    Be sure to include a log : check how to

    DOWNLOADS
    POCO X3 (NFC) (surya/karna)

    Note: These are enforcing builds. Safety net checks pass out of the box! No need to flash magisk modules, which might in turn break the integrity!

    Builds have been unified now under surya codename for both NFC and non-NFC variants

    Tip: Select OEM -> Device,choose Arrow version, choose build type: "GAPPS" or "VANILLA" to download.

    Latest Instructions for OSS builds (w.e.f 10/05/2021)
    If migrating from pre OSS builds​
    • Flash the latest available MIUI 11 firmware. (Flash global or any if you can't find your region)
    • Download and copy arrow build to a OTG prendrive or sd card.
    • Now flash Arrow Vanilla/Gapps build.
    • FORMAT DATA. (You'll loose all your data!)
    • Reboot.
    Fresh install coming from MIUI​
    • Flash latest available MIUI 11 if you aren't on it already.
    • Install any suitable recovery (mentioned below).
    • Download and copy arrow build to a OTG prendrive or sd card.
    • Flash latest Arrow Vanilla/Gapps build.
    • FORMAT DATA. (You'll loose all your data!)
    • Reboot.
    TWRP Recovery by @brigudav :
    Note: This build of twrp will support decryption on ArrowOS OSS builds.​

    ArrowOS Recovery :
    Note: This is a very basic aosp recovery only intended for OTA installs. Do NOT expect other functionalities.​
    ​
    * Do not use with DFE or while unencrypted.​
    ​
    F.A.Q :

    1. My WiFi, bluetooth and network aren't working after updating to OSS build?
    A. This happens if you're still on the old Q firmware. Flash the latest available R firmware and then follow the above give steps to properly flash the rom.​

    2. Unable to update OTA's using TWRP?
    A. The current available recoveries are outdated and are no longer supported for OSS builds. To have a hassle free OTA experience use the above mentioned ArrowOS recovery.​
    ​
    A. Two of the currently supported recoveries are mentioned above.​

    Read our blog article/post about:
    * GAPPS and VANILLA variants
    * Checking build integrity

    ROM Source: https://github.com/ArrowOS
    Kernel Source: https://github.com/ArrowOS-Devices/android_kernel_xiaomi_surya

    XDA:DevDB Information
    ArrowOS, ROM for the Xiaomi Poco X3 NFC

    Contributors
    ganesh varma, kubersharma, palaych
    Source Code: https://github.com/ArrowOS

    ROM OS Version: Android 11
    ROM Kernel: Linux 4.x
    ROM Firmware Required: Latest R firmware
    Based On: AOSP, CAF

    Version Information
    Status:     Stable
    Stable Release Date: 2020-11-19

    Created 2020-11-19
    Last Updated 2021-05-18
    View
    16
    brigudav
    brigudav
    wCk32d7 said:
    Hello.

    Does anyone have any working TWRP for Surya model ?

    I see that the developer Brigudav seems to have given up on developing TWRP for Surya.

    TWRP by Brigudav Official website

    So is there any replacement ?

    Thank you very much.
    Click to expand...
    Click to collapse
    Update -09
    View
    14
    ganesh varma
    ganesh varma
    So i haven't been around here for a while, after looking at the recent posts many seem to be confused, blaming and do not understand on migrating to OSS builds. In the final MIUI vendor builds the OTA functionality was blocked in order to prevent users from directly updating to OSS builds as it will be needing a MIUI 11 firmware followed by a clean flash. The same has been notified in our device changelogs. Every step and preventive measures have been taken, there's only much i can do from my side in clearing things up. We have this forum and community in place to help each other out, so lets not be pointing fingers here!

    Here again i would like to make it clear with a simple guide on how to migrate onto OSS build!

    Note: This update will require a CLEAN FLASH (format data), so please backup everything beforehand.
    • Flash the latest available MIUI 11 firmware. (Region doesn't matter!!)
    • Now flash Arrow Vanilla/Gapps build.
    • FORMAT DATA. (You'll loose all your data!)
    • Reboot.
    Beware that the current available recoveries haven't been updated yet to support decryption for OSS builds at this point.
    View
    13
    SkaboXD
    SkaboXD
    Here are the instructions on how you should flash the new OSS Vendor ROM since most people here are confused:

    - Flash latest TWRP by brigudav
    - Flash Android 11 12.0.7 MIUI firmware
    - Reboot recovery
    - Format Data
    - Reboot recovery
    - Flash ArrowOS

    OPTIONAL:
    - Flash Magisk
    - Flash Gapps (If you're on Vanilla build & If you want custom gapps)

    - Reboot system

    Download link:
    - Firmware: https://xiaomifirmwareupdater.com/firmware/surya/stable/V12.0.7.0.RJGEUXM/
    - TWRP: You can find it on 4pda but you need an account. I'm not allowed to share it, so you have to get it yourself.

    This firmware is for NFC model as I'm not sure where is A11 firmware for non-NFC model. It can possibly work for non-NFC model, feel free to try.
    View
    10
    ganesh varma
    ganesh varma
    janhammer504 said:
    Mission Impossible in all custom ROMs !

    1. Safetynet check the bootloader status and will automatically fail if magisk is not installed (Magisk Hide ON must be applied for this) !

    2. Furthermore, now you have to install the safetynet-fix module to make your banking apps working !

    3. Finally, you must hide Magisk Manager.apk with a random name too (Magisk Settings)
    Click to expand...
    Click to collapse
    To everyone, please STOP this misconception about having the need to flash magisk in order to pass safety net. Do read the OP I've clearly mentioned there's no need of a magisk or modules for safety net. Device is certified and passes safety net out of the box without need of any modifications.

    By improper usage of magisk and mods you're further complicating and breaking things when they're completely unnecessary which end up causing unrelated issues which you end up calling them rom source bugs ¯\(◉‿◉)/¯

    P.S : I'm not against magisk, but when you do prefer using modifications do ask yourself on your needs and if you're able to rectify the issues it might generate. Isolate yourself from magisk or any form of modifications to recheck and confirm the issue before making a bug report.
    View

New posts