Development [ROM][11.0] crDroid 7.14 [OFFICIAL] (vayu/bhima)

Search This thread

Viggen66

Senior Member
Mar 22, 2009
710
77
It's a very good news for the CR7 user ! You should know to the 7.16 version has issue to pass safetynet (cts profile mismatch) while the 7.15 pass it without issue.

I can't help for the kernel, I was't a dev, maybe custom kernel maintainer can help you.
Better to upgrade to newer CrDroid 8.7 based on Android 12.1, I don't see any change to the repo, so it will be a waste of time downloading so much stuff, I have seen videos on newer CrDroid and it seems they fixed the rom and is very stable now.
 

Skyfly19

Member
Aug 27, 2020
20
7
Better to upgrade to newer CrDroid 8.7 based on Android 12.1, I don't see any change to the repo, so it will be a waste of time downloading so much stuff, I have seen videos on newer CrDroid and it seems they fixed the rom and is very stable now.
I already tried CR8 few months and was very disappointed (NFC not working + the UI was extremely ugly). Only 1 custom A12 rom is very stable with just a ok UI but the real problem will stay the trash base provided by the google UX designer.

In my case, I will test another A11 rom for see if it got the same scoped storage issue than CR7. My final setup will be a A11 roms, we are lucky to still got the choice to use A11 unlike the 2O22 phone user.
 
  • Like
Reactions: ChriMo

Viggen66

Senior Member
Mar 22, 2009
710
77
I already tried CR8 few months and was very disappointed (NFC not working + the UI was extremely ugly). Only 1 custom A12 rom is very stable with just a ok UI but the real problem will stay the trash base provided by the google UX designer.

In my case, I will test another A11 rom for see if it got the same scoped storage issue than CR7. My final setup will be a A11 roms, we are lucky to still got the choice to use A11 unlike the 2O22 phone user.

We had Lineage 18.1 available but they deleted all roms from A11
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    I have downloaded all the repo for Crdroid Android 11, to build a 7.20 updated crdroid version to this phone, since I don't like Android 12, when my computer was compiling the kernel it got an error, and exit compiling the rom, which is unfortunate, on the other hand, I had another phone and the compile was flawless, the version 7.20 is an extremely stable version of CrDroid, now I'm using my other phone as my main one with Crdoid 7.20 and I'm quite happy with it,which I didn't find any bug, comparing with 7.16, is a much better rom.

    Does anyone here knows how to compile only the kernel to see if the bug or error is fixed, so I could try compile again the rom.
    1
    I have downloaded all the repo for Crdroid Android 11, to build a 7.20 updated crdroid version to this phone, since I don't like Android 12, when my computer was compiling the kernel it got an error, and exit compiling the rom, which is unfortunate, on the other hand, I had another phone and the compile was flawless, the version 7.20 is an extremely stable version of CrDroid, now I'm using my other phone as my main one with Crdoid 7.20 and I'm quite happy with it,which I didn't find any bug, comparing with 7.16, is a much better rom.

    Does anyone here knows how to compile only the kernel to see if the bug or error is fixed, so I could try compile again the rom.
    It's a very good news for the CR7 user ! You should know to the 7.16 version has issue to pass safetynet (cts profile mismatch) while the 7.15 pass it without issue.

    I can't help for the kernel, I was't a dev, maybe custom kernel maintainer can help you.
    1
    Better to upgrade to newer CrDroid 8.7 based on Android 12.1, I don't see any change to the repo, so it will be a waste of time downloading so much stuff, I have seen videos on newer CrDroid and it seems they fixed the rom and is very stable now.
    I already tried CR8 few months and was very disappointed (NFC not working + the UI was extremely ugly). Only 1 custom A12 rom is very stable with just a ok UI but the real problem will stay the trash base provided by the google UX designer.

    In my case, I will test another A11 rom for see if it got the same scoped storage issue than CR7. My final setup will be a A11 roms, we are lucky to still got the choice to use A11 unlike the 2O22 phone user.
  • 36
    BE3pE0l.png

    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today


    Features:
    https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn


    Install instructions:

    Pre-installation:


    Flashing Instructions from any custom ROM (Thanks to Raf & @kamild_)
    • Backup all your data.
    • Transfer ROM and other zips (such as Gapps or Magisk) to internal storage, SD card or USB drive.
    • Boot/reboot to recovery.
    • Flash recommended MIUI firmware 12.5.5.0.
    You can find them here. If you're already on it, you can skip this step. You can flash the fastboot version of the MIUI stock ROM through Mi Flash tool / Fastboot too but the procedure is slower.
    • Flash CrDroid ROM.
    • Flash GApps (Optional step) FlameGapps
    • Flash Magisk (Optional step, only if you want root)
    • Format Data > type "yes" and press enter (different from the "wipe data" option)
    • Reboot to system



    First time installation from MIUI 12.5.2.0 or above:

    1. Remove any fingerprint, PIN, or password in MIUI. Backup all your data, next step will factory reset the device.
    2. Unlock the bootloader.
    3. Flash recommended custom recovery from the "Prerequisites" section with fastboot.
    4. Continue from step 2 of the "custom ROM instructions" below.


    UPDATE INSTRUCTIONS:​

    OTA Working: Just update from OTA screen

    Manual Update installation:

    • Reboot to recovery
    • Flash Rom (default path: root/data/crdroid_updates)
    • Wipe Cache/Dalvik
    • Reboot


    Download:
    ROM CrDroid - Vayu/Bhima Rom Download


    Known issues:
    -Tell me, be sure to include a log: check how to


    Sources:
    ROM: https://github.com/crdroidandroid
    Device tree: https://github.com/crdroidandroid/android_device_xiaomi_vayu

    Credits:
    @neobuddy89 - Current Co-Maintainer
    @SebaUbuntu, @Kubersharma for device trees.
    Xawlw, Foxtrot47 for device updates & fixes.
    @Nebrassy for his work with TWRP.
    Mochi for his amazing work in kernel & updates.
    @darthjabba9 for his work with OFox.
    + All devs that make this possible

    Thanks:
    @SebaUbuntu for his OSS Vendor based version and trees.
    Poco X3 Pro DevHub - All testers & Admins (Uwe Pilot, Stiff, TheDutchTesterGuy, ...)
    LineageOS, SlimRoms, AOSPA (Paranoid Android), OmniRom.
    CrDroid Team @neobuddy89 - Lup Gabriel...many others

    Visit official website @ crDroid.net
    Poco X3 Pro | OFFICIAL Telegram
    crDroid Community Telegram
    crDroid Poco X3 Pro - vayu Telegram
    Donate to help CrDroid team pay server costs
    Donate to help me in development
    9
    this is a missing feature, unlocking works, but lacks a choice of fingerprint scanner behavior
    Yes, I need to check how to implement in vayu.

    I'm happy to say we have Official Support!

    Thanks to all for your comments.

    New update avaiable ;-)
    6
    ViPER4Android FX and James DSP Manager - Break Wi-Fi, simply won't turn on

    After installing NLSound 2.3, the sound starts to wheeze (upon notification), this is when properly configured, as it was done on other roms.

    These modifications can be installed in magisk and working properly on other roms

    However, nice rom!
    Thanks,
    Sorry, some magisk modules are breaking device overlays so I don't support modules for now.

    and fingerprint press and touch toggle
    is dynamic refresh rate possible to add like on arrowos
    Dynamic refresh added in next version.

    fps info fixed

    CrDroid was always one of my favorite roms, the only things that are a bit annoying are:
    - press fp to unlock button that one of poco x3 nfc devs made it possible.
    - haptic feedback when you pull down status bar...
    thanks
    (press fp to unlock button) I have tried it but commenting on it with more people I do not know if it is the best option.
    There is no option to select the button behavior.
    There are reboots when using trcamera and Google meet the log also has camX errors spammed
    View attachment 5328217
    Will be fixed in next versions
    6
    New build, 23-05

    -Fixed Battery Charge Led (need to fix brightness)
    -Fixed Metadata issue with media-gallery (seems still video files preview issues in rare cases)
    -Added GoogleCamGo
    -Rom Changes

    Can be dirty flash + Wipe caches.

    Link to download from Sourceforge:
    6
    Hi, new OSS version is ready.

    Required firmware: MIUI (Global): V12.5.2.0

    To update, format data is required. (You can try dirty flash, if bootloop, reboot to recovery and format data)
    -Download new version by OTA or from Soundforge.
    -Reboot to recovery
    -Flash new update (No Gapps reflash needed)
    -Format data (type yes)
    -Reboot to system.

    If you found problems for updating, flash MIUI Global Rom from recovery and follow above steps.

    Thanks for your support.