[ROM][11.0 GO][SM-P600] Lineage 18.1 GO [UNOFFICIAL]

Search This thread

SanisJZX

Member
Dec 10, 2018
23
6
Hi there

trying to install on lt033g(P601, a 3g version)
it says package is not for that device.
error code is E3004
3g module on my device is broken and useless. So I'm just gonna use wifi.
What I'm gonna do next?

Thanks
 
Hi there

trying to install on lt033g(P601, a 3g version)
it says package is not for that device.
error code is E3004
3g module on my device is broken and useless. So I'm just gonna use wifi.
What I'm gonna do next?

Thanks
Inside the LOS...zip there is somewhere an "updater-script" file in which it says for which device this ROM is.
Afaik you should extract it, alter at least all "lt03wifiue" to "lt033g" (and change all other traces as well), put it back into the zip (overwrite the old one) and flash it.
 

SanisJZX

Member
Dec 10, 2018
23
6
bmwdroid, thanks mate
actually have updated recovery from OP and ROM flashed OK
but still having a bootloop
any advice pls?
 

asleepingsoul

New member
Oct 27, 2022
1
0
Hello ! This rom works very well on my tablet ! But i have just one problem...When i enable the bluetooth, it loops in "on...off...on...off...". Anyone has got this problem ?
 

kipphebel3

Member
Sep 17, 2019
34
7
First of all: Thanks! I have so been looking forward to upgrading my tablet! Here is what I found:

The greatest hurdle was, as always, to get TWRP on the device. I made the obvious mistake of trying from my new Win11 laptop.. That did not go well, so I used my old, that has been used to successfully upgrade several samsung phones in the past. This is what I used:

Buttons as seen from front. I always get them mixed up...

--- --- ---
A B C

A C = Android system recovery

A B then C = download

3.2.3.0 (twrp-3.2.3-0-lt03wifiue.img.tar) worked apparently. Tried several that did not, whether it was the file, me or the phase of the moon is unclear.

Once TWRP was in place, oh yes, I got that famous "Recovery is not seandroid enforcing", but TWRP ran anyway. Copied the ROM and GApps to an SD-card inserted and wiped according to instructions, then installed ROM, Installed GApps and checked "install TWRP app".

Rebooted. Had a blank screen for a long time, then the lineage animation for an even longer time then it dropped back to TWRP?

So, I did the wipe again and installed just the 1.0 ROM this time and it came up fine so I do not know if it was the 1.1 ROM or the TWRP app that jinxed it.

TWRP again and installed GApps. System seems OK, but I do need to find a faster SD card. The tablet has just 32Gb and I have had a SanDisk 64Gb from the start, but now lineage says the card is too slow, so I will try to get a faster one next week.

I do not know what the changes are between the 1.0 and 1.1 ROM, but I wonder if I should upgrade, using 1.1?
 

hansgj

New member
Jul 23, 2007
4
0
Acabo de instalar correctamente esta ROM. No funciona el sensor IR. Se calienta mucho, el s pen no tiene la opción de escritura a mano
 

hansgj

New member
Jul 23, 2007
4
0
Acabo de instalar correctamente esta ROM. No funciona el sensor IR. Se calienta mucho, el s pen no tiene la opción de escritura a mano
 

kipphebel3

Member
Sep 17, 2019
34
7
Sirve para control remoto de muchos equipos como tv, minicomponentes etc pero no funciona, instalé el mismo app. en mi smartphone y si funciona. Asi lo comprobé
Sorry. My command of spanish is too limited so I will reply in english: I tried downloading "Peel Smart Remote". Set it for Samsung since our TV is that. Tried controlling. Verified by using my phone camera that IR was indeed transmitting, but the TV was unresponsive. Now the TV I have has a radio remote, I think.
 
  • Like
Reactions: hansgj

hansgj

New member
Jul 23, 2007
4
0
Lo siento. Mi dominio del español es demasiado limitado, así que responderé en inglés: Intenté descargar "Peel Smart Remote". Configúralo para Samsung ya que nuestro televisor es eso. Intenté controlar. Verifiqué usando la cámara de mi teléfono que el IR sí estaba transmitiendo, pero el televisor no respondía. Ahora el televisor que tengo tiene un control remoto de radio, creo.
justo hice eso de instalar el Peel Remote pero no reconoce wifi asi que instale otro mod y no funciona el control pero si en mi smartphone
 

kipphebel3

Member
Sep 17, 2019
34
7
I lack the specific knowledge to fix the code, but I can help in troubleshooting. It appears that the IR emitter is sending something. Let me hook up an IR receiver and see what it is transmitting. It will probably be a few days before I have the chance though.
 
  • Like
Reactions: hansgj

kipphebel3

Member
Sep 17, 2019
34
7
Upgraded mine from 1.0 to 1.1 today. No issues so far. With 1.0 I saw intermittent restarts when browsing. Sometime the app would restart, sometimes the whole unit.
 

kipphebel3

Member
Sep 17, 2019
34
7
justo hice eso de instalar el Peel Remote pero no reconoce wifi asi que instale otro mod y no funciona el control pero si en mi smartphone
I tried Peel Remote and tested the signal with an IR receiver. When I tried volume up, I got a single byte trasmitted as serial, but it did not look anything like the pulses I got from my Samsung Smart remote.
 

explorerexe

New member
Jun 11, 2017
2
1
Redmi K20 Pro
Xiaomi Mi Pad 5
Experimental build, some changes were made to the kernel and added support for navbar (for now the 3 keys are not being disabled). But the crash problem is still not solved 100%. Please let me know if this build got worse or better with application usage.
@DanielBR911 could you please reupload the Experimental build? Mediafire download for this file is currently not working. I tried several days with different PCs, Browsers and IPs now.
I got 1.1 right now and have some App crashes. I would like to try the newer version you made.

Other topic: Wifi drop problems
Initially I also had severe wifi problems. Wifi was working with stock rom, but not with Custom Roms. Linage OS 18.1 was the worst, it was not working at all. Could connect but as soon as any request to the Router was made, the connection was lost.
I already tried different Custom Roms and Kernels in the past. I also tried (Linage OS 18.1) without GApps and with many changed to the Wifi setup (2.4GHz only 5GHz only, different channels, Changing WPA Modes, Disabling Mesh, etc.). Nothing helped.
The one thing that fixed my Wifi drop problems now, was to disabled (IPV6) Router Advertisement in my router (Fritzbox 7590). Eversindce my Wifi connection is stable.

Device: SM-P600 Samsung Galaxy Note 10.1 (2014) from Germany
 
Last edited:
  • Like
Reactions: kipphebel3

kipphebel3

Member
Sep 17, 2019
34
7
Other topic: Wifi drop problems
Initially I also had severe wifi problems. Wifi was working with stock rom, but not with Custom Roms. Linage OS 18.1 was the worst, it was not working at all. Could connect but as soon as any request to the Router was made, the connection was lost.
I already tried different Custom Roms and Kernels in the past. I also tried (Linage OS 18.1) without GApps and with many changed to the Wifi setup (2.4GHz only 5GHz only, different channels, Changing WPA Modes, Disabling Mesh, etc.). Nothing helped.
The one thing that fixed my Wifi drop problems now, was to disabled (IPV6) Router Advertisement in my router (Fritzbox 7590). Eversindce my Wifi connection is stable.

Device: SM-P600 Samsung Galaxy Note 10.1 (2014) from Germany
Thanks! I see the occasional WiFi Drp as well. Will try disabling IPV6
 

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    1607247455067.png

    LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.


    Why Android 11 GO version? According to the Android 11 Go Edition Device Setup Guide, starting with Android 11 all smartphones with 1GB or 2GB of RAM must use Android Go.
    Although this tablet has 3 GB of ram memory, this tablet has a technology of 8 years ago, I believe that the Android GO version can run in a responsive way with minimal lag.
    In addition, some tweaks were applied to improve the overall performance for this old device.

    *This rom is also compatible with SM-P601 but without 3G data network support and Phone.

    Working:
    > SD-card
    > GPS
    > S Pen
    > WIFI
    > Bluetooth
    > Sensors
    > Audio
    > Screen Record
    > Camera (just picture)
    > IR Sensor
    > MTP
    > Microphone

    Not Working:
    > Camera (Video)

    *For now there are crashes in certain apps and in certain situations. The rom is only recommended for testing and not for daily use. As the solutions are discovered , they will be applied in future builds .


    How to install this ROM:
    1. Install TWRP Recovery : twrp-3.5.0_9-0-lt03wifiue
    From: https://dl.twrp.me/lt03wifiue/twrp-3.5.0_9-0-lt03wifiue.img.html

    2. Wipe Cache, Data and System Partition

    3. Install the ROM and Gapps.
    I recommend the gapps from https://opengapps.org
    ARM/11.0/PICO

    4. Reboot


    How to update this ROM?
    1. Go to TWRP Recovery.

    2. Install the Rom and Wipe Cache and Dalvik.

    3. Reboot.

    Downloads:
    Download ROM V1.1

    Download ROM V1.0


    -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Kernel and Device Tree:
    n1awifi
    n1a-common
    universal5420-common
    Kernel

    -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Credits:
    My special thanks to everyone involved in the Exynos5420 team and Lineage OS.

    4
    Ok, for those who want working SafetyNet and Play Store certification (for Netflix and Disney+), follow these steps (I am using Magisk 24.1 for reference, this will also work on Magisk 24.2 & 24.3):

    1. Install Rom, Gapps, and Magisk in twrp, exactly in this order.

    2. Open Magisk, make sure it says its installed. Go to the settings, enable Zygisk and DenyList. (Note: DO NOT login into your Google Account yet, we need the Play Store to get certified first)

    3. Download these 2 modules: Universal SafetyNet Fix & MagiskProps Hide Config. You'll also need to download an app called YASNAC in order to check the SafetyNet Status, and TermUX for the terminal app.

    4. Install the modules and reboot. Install YASNAC and Termux. Open YASNAC, and run the SafetyNet check. You should get the Pass result.

    5. Open Termux. Type in su. Grant Magisk root access. Type in props and hit enter.

    6. When the MagiskProps menu comes up, type 1. Then type f. A list of device manufacturers will show up. Look for Samsung and type in that number. Then a list of certified devices will come up. Look for our device (SM-P600) and type in the number that matches our device. It will ask if you want to set this as the device fingerprint. Type y. When the process is complete, type y again to reboot.

    7. Upon reboot, open the Play Store. Go to Settings, scroll down to Play Store version. It should say below that "Device is certified". You should now login into your Google account and verify this by installing either Netflix or Disney+.

    (If you don't see the device certification section yet, wait about 5-10 minutes. If it still says "Device is not certified", clear cache and app data from the Play Store. Also make sure you have the latest version of the Play Store and Google Play services. You can find those here:

    Google Play Store APKs
    Google Play services APKs (The variant for our device is 150300, 150306, 170300 or 170306: arm-v7a, Android 11+, 320 dpi)

    When finished, the results should look like this:

    photo_2022-02-03 13.22.59.jpeg


    2022-02-03 13.23.30.jpg
    3
    Definitely down to test!
    Sure interested to test. I've not noticed crashes on 1.1 but am only using in short bursts.

    I think my magisk problems are due to having installed v23 through twrp when I installed the rom, then updating the app to v24 without updating the flashed package. If installing a new rom, I'll make sure to flash v24.
    Experimental build, some changes were made to the kernel and added support for navbar (for now the 3 keys are not being disabled). But the crash problem is still not solved 100%. Please let me know if this build got worse or better with application usage.
    2
    Just installed this new build with a fresh copy of OpenGapps and Magisk 24. So far so good. Although, when you turn on the on screen nav buttons, the hardware keys aren’t fully disabled. You can still tap on the Menu and Back keys and they work, even with the on screen nav buttons turned on. Other than that, rom seems to be smooth so far. Working on getting the SafetyNet to pass now that Magisk 24 doesn’t have MagiskHide anymore.
    2
    Al

    Also, don’t know if this feature is removed from Go roms, but Chat Bubbles don’t show up when I use apps like Telegram. Definitely seen this feature in other LOS 18 roms.
    Yes, GO edition removes overlays so no multi window or any overlay function. I wish there were two builds GO and regular because I use multi window.