[ROM][11.0][mt6763][UNOFFICIAL][UMIDIGI A5 Pro][A5_Pro] crDroid v7.5 [26.04.2021]

Search This thread

Hadenix

Senior Member
crdroid.jpg


About
CrDroid for UMIDIGI A5 Pro, with things that mostly work as expected. This ROM depends on the official image of the vendor, so make sure you are using the latest official build before installing this ROM on your device. Also, since these MTK devices often have a few odd variations, be aware that your crdroid may be different.

Join my telegram channel to get latest updates
UMIDIGI A5 Pro Updates

Whats working?
  • Boots
  • RIL (Calls, SMS, Data)
  • Wi-Fi
  • Access point
  • Bluetooth
  • Video Playback
  • Audio
  • Sensors
  • Flash
  • GPS
  • Fingerprint
  • Camera
  • Offline charging.

Known Issues?
  • Call volume

Links
Installation
  1. Be sure to be on the latest stock firmware! Everything was tested based on the firmware: UMIDIGI_A5_Pro_V2.0_20210326
  2. Wipe->Wipe Data->yes
  3. Wipe->Advanced Wipe->Wipe System,Cache
  4. Reboot Recovery
  5. Install Zip->SD Card->CrDroid-A5_Pro-Unofficial.zip
  6. Install Zip->SD Card->open_gapps-arm64-11.0-nano.zip
  7. Install Zip->SD Card->Magisk.zip
XDA:DevDB Information
Lineage OS, ROM for the UMIDIGI A5 Pro/breeze


Contributors
Hadenix

ROM OS Version: Android 11
ROM Kernel: Linux 4.x
Based On: Lineage OS

Version Information
Status: Beta
 

Attachments

  • Screenshot_20210426-022238550.jpg
    Screenshot_20210426-022238550.jpg
    820.3 KB · Views: 745
  • Screenshot_20210426-022303052.jpg
    Screenshot_20210426-022303052.jpg
    223.8 KB · Views: 466
  • Screenshot_20210426-022246826.jpg
    Screenshot_20210426-022246826.jpg
    167.7 KB · Views: 467
  • Screenshot_20210426-022314881.jpg
    Screenshot_20210426-022314881.jpg
    168.7 KB · Views: 466
  • Screenshot_20210426-022352931.jpg
    Screenshot_20210426-022352931.jpg
    97.5 KB · Views: 481
Last edited:

Hadenix

Senior Member
Build Date - 14.04.2021

CHANGELOG:

- Source update, welcome version 7.5
- Gboard: remove spacing on navigation bar
- Add HotwordEnrollment support from Begoniain Q
- Fix Ok Google (you need OpenGApps Nano to work)
- Disable unspecialized app process pool (Zygote hooks doesn't work properly with USAP enabled)
- update prebuild kernel from stock ROM V2.0 20210326


Build Date - 09.04.2021

CHANGELOG:

- added CTS on R (test)
- Workaround SafetyNet check
- Did a test with "enforce selinux", the system booted but incoming calls did not work. returned "permissive". there will be time to watch later. at the moment, so!
- Update build fingerprint to redfin 2021-04-05
- ZRAM: take values from stock ROM
- Returned the old path for solution for incoming calls
- Set correct bootloader board name (Mediatek devices usually set bootloader board name via ro.product.board on /vendor/build.prop)
- Sorting partitions in fstab


Build Date - 05.04.2021

CHANGELOG:

- Solution for incoming calls (Hex edited)
- Remove rild.libpath and rild.libargs props (These are defaults in mtk ril daemon)
- Force enable VoLTE and VoWifi / Disable ViLTE
- Toggle airplane mode on and off on boot (This hack needs ImsInit commit to request ims on boot to work properly)
- Update networkAttributes
- Add modified treble app (IMS)
- Add WifiOverlay and TetheringConfigOverlay
- Enable gestural navigation by default
- Disable serial console notification
- Fstab V1.9_20210226
- Expand PRODUCT_DEXPREOPT_SPEED_APPS list
- Update audio XML
- Update shims for R
- Add auto brightness option
- Address rild denials for IMS
- Add permissions for lock screen
- AptX from begonia
- Permissions for mediatek IMS
- Use Prebuild APNS Config
- Build AOSP RCS packages
- Build libhidltransport/libhwbinder (Needed for old blobs)
- Add Camera Privapp List
- Adapt MTK offline charging for R
- Set display DPI to 420
- fix SELinux crashes
- Add a new list of pinned file for the JIT in zygote
- Add biometric sensor overlay
- Turn on MAC Randomization
- Kang brightness overlays
- Update kernel from V1.9_20210226
- Update pinned (Pixel 5)
- Import of IDC and Keylayout
- Hi, Android 11
 
Last edited:
  • Like
Reactions: Verygafanhot

Hadenix

Senior Member
Build Date - 23.04.2021

CHANGELOG:

- clear Camera AUX Package List
- remove WifiOverlay
- enable support for third party location providers
- enable proximity check on awakening
- disable NearbyMessagingService and DiscoveryService (Affects Wi-Fi speed and stability)
- Snap: enable camera api v2
- enable additional camera for Snap (bokeh)
- specify the number of supported cameras
- declare support for STATE_DOZE
- overlay: cleaning, sorting
- use vibration patterns from Pixel 2
- enable display burnout protection in Ambient Display
- enable AOD (And disable by default)
- added config_dozeComponent
- volume index for music stream to limit headphone volume and display warning
- pin: CameraApp and HomeApp
- updating libraries
- Camera shutter sound enabled (country dependent)
- removed the config setting swipe up gestures (it was relevant for android 9, now we are doing the 11th and we no longer need it)
- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius
- updated list of default files pinned by Pinner
- updated the list of files pinned by the Pinner service with the JIT Zygote boot image
- updated network attributes
- updated configs overlay brightness
- enable call recording
- disable Bluetooth in the setup wizard
 

Hadenix

Senior Member
Build Date - 26.04.2021

CHANGELOG:

- CrDroid source update
- Add WifiOverlay
- Sepolicy: fix video crashing in apps targeting Android R
- Do not sign RRO Wi-Fi with platform certificate
- Update config_tether_wifi_regexs
- Change package name TetheringOverlay
- Use patchelf instead of LD_SHIM_LIBS
- Drop USE_XML_AUDIO_POLICY_CONF (only used on QCOM audio HAL)
- Hotspot fix
 

StaryMuz

Senior Member
Dec 27, 2012
562
189
The system has an extremely illuminated display for black background. Increased battery consumption.
 

Hadenix

Senior Member
Build Date - 02.05.2021

CHANGELOG DEVICE:

- remove PRODUCT_DEXPREOPT_SPEED_APPS for SystemUI
- overlay: disable MAC randomization

CHANGELOG ROM:
====================
05-02-2021
====================

* external/asus/stitchimage
9bf8a6f Remove Firebase from prebuilt manifest

* frameworks/base
7a53a0846ba SystemUI: Do not change interrupt state for heads up
e1aade6183f SystemUI: Fix Ticker layout
68d7ac60851 Status bar notification ticker [1/2]
216ba939c13 Clipboard access toast: Improvements [1/2]
93f1139a61a base: clipboard toast toggle [1/2]
45b8b764305 base: iOS-like toast notification for clipboard access
37c4781493b Fix two problems in the ExecuteBinary function.
0d0ae0e19a2 Merge pull request #652 from mukesh22584/11.0
7f77595a3ce SystemUI: Add crDroid Light FOD icon [1/2]

* packages/apps/Launcher3
020cb00e0 Merge pull request #144 from mg712702/11.0
5ab0eb9ec SystemShortcuts: fix fc with InfoBottomSheet

* packages/apps/crDroidSettings
f3c4a99c Status bar notification ticker [2/2]
7260c97f Clipboard access toast: Improvements [2/2]
71eb3086 Merge pull request #755 from mukesh22584/11.0
5c374d82 crDroidSettings: Remove unused & duplicate FOD icons
57186eed crDroidSettings: Add crDroid light FOD icon [2/2]

====================
05-01-2021
====================

* build/make
a957ba59b Merge pull request #29 from GtrCraft/11.0

* packages/apps/Jelly
16e5ac7 Jelly: Add support for viewable content:// scheme
47ad959 Jelly: Start using OpenMultipleDocuments for FileShower

* packages/apps/Launcher3
f74a1c4b4 Merge pull request #143 from DarkJoker360/11.0
30ed0bb8c Launcher3: Fix duplicate attributes

* vendor/lineage
9feaf814 vendor: apns: Add Ting

====================
04-30-2021
====================

* frameworks/base
88027b819ed New translations (#650)

* packages/apps/crDroidSettings
e8fd71c9 New Crowdin updates (#751)

====================
04-29-2021
====================

* art
2d274fc6be Fix inliner instruction/register limits

* frameworks/base
b640d2fd7df fix INTERNET enforcement for secondary users
b8f98942bae Add notification guts priority button background opacity
6ee31ac340e Add toggle to disable charging animation [1/2]

* packages/apps/crDroidSettings
ef127206 Add toggle to disable charging animation [2/2]

====================
04-28-2021
====================

* frameworks/base
62ecee88423 Do not show charging animation when disconnecting
67decf26794 base: Use wireless charging animation for wired charging too
9ec2c5e9abd Fix notification guts and header opacity

* packages/apps/Settings
cbe81eaa1f Merge pull request #100 from mukesh22584/11.0
ca8a8f2221 Settings: Add preference for maximum screen refresh rate
ee53de5fe2 Settings: Allow devices to provide their own color mode strings

* vendor/lineage
df7a2533 Revert "config: Set UM 4.4 family as QSSI supported platform"

====================
04-27-2021
====================

* frameworks/base
18a84d3e26c Fix up notification opacity with animation
4ac4546425e New Crowdin updates (#646)
9d3e7ee3e25 Fix up alpha scale for notification image view

* packages/apps/crDroidSettings
bdb7ea7c New Crowdin updates (#748)
 

StaryMuz

Senior Member
Dec 27, 2012
562
189
The basic backlight of the display is strong. Even cleanly black screen is too shining.
 

Yukki159_

Member
Jan 21, 2021
15
15
Brazil
crdroid.jpg


About
CrDroid for UMIDIGI A5 Pro, with things that mostly work as expected. This ROM depends on the official image of the vendor, so make sure you are using the latest official build before installing this ROM on your device. Also, since these MTK devices often have a few odd variations, be aware that your crdroid may be different.

Join my telegram channel to get latest updates
UMIDIGI A5 Pro Updates

Whats working?
  • Boots
  • RIL (Calls, SMS, Data)
  • Wi-Fi
  • Access point
  • Bluetooth
  • Video Playback
  • Audio
  • Sensors
  • Flash
  • GPS
  • Fingerprint
  • Camera
  • Offline charging.

Known Issues?
  • Call volume

Links
Installation
  1. Be sure to be on the latest stock firmware! Everything was tested based on the firmware: UMIDIGI_A5_Pro_V2.0_20210326
  2. Wipe->Wipe Data->yes
  3. Wipe->Advanced Wipe->Wipe System,Cache
  4. Reboot Recovery
  5. Install Zip->SD Card->CrDroid-A5_Pro-Unofficial.zip
  6. Install Zip->SD Card->open_gapps-arm64-11.0-nano.zip
  7. Install Zip->SD Card->Magisk.zip
XDA:DevDB Information
Lineage OS, ROM for the UMIDIGI A5 Pro/breeze


Contributors
Hadenix

ROM OS Version: Android 11
ROM Kernel: Linux 4.x
Based On: Lineage OS

Version Information
Status: Beta
Nice rom you have the trees? i want to compile too
 

Merftj

Member
Sep 18, 2019
23
1
Maceió
How to place the virtual buttons? (Solved)

I'm using my wife's smartphone for everyday use. Working very well, I did not find any bug, unless sometimes the touch stops responding and then it is necessary to press the power button to lock and unlock and return to normal. But I was already having this bug with the original rom.
 
Last edited:

Reeyster

New member
Jul 20, 2021
3
0
Hello. thanks for the rom!!

Just a question if ever you have a solution to my problem, after i install your rom it works fine i do like it.
Just that the previous games i was playing, i cant install it from google play store and some other similar store i tried multiple times checked my connection, uninstall update, clear storage, format etc but the problem still persist ..
//Not all of my games, 2 out of 3 were unable to install to my phone

if you or anyone have a solution i will appreciate it if you share it to me, thanks in advance!!


Fixed by deleting migrate-legacy-data-obb.sh using twrp.
How?
Go to TWRP
>Advance
>File Manager
>System folder
>bin folder
>look for migrate-legacy-data-obb.sh or migrate-legacy-obb-data.sh
>Delete and reboot

If you don't see system folder, mount it first!
Credits to the telegram group, most issue fix can be found there!
 
Last edited:

hm2yk

New member
Oct 14, 2021
4
0
All worked fine until the rom installation.
Getting an error that the rom is not compatible with a5 pro eu .
is there a rom that is compatible with a5 pro e
 

girlie08

New member
Jan 30, 2022
2
0
crdroid.jpg


About
CrDroid for UMIDIGI A5 Pro, with things that mostly work as expected. This ROM depends on the official image of the vendor, so make sure you are using the latest official build before installing this ROM on your device. Also, since these MTK devices often have a few odd variations, be aware that your crdroid may be different.

Join my telegram channel to get latest updates
UMIDIGI A5 Pro Updates

Whats working?
  • Boots
  • RIL (Calls, SMS, Data)
  • Wi-Fi
  • Access point
  • Bluetooth
  • Video Playback
  • Audio
  • Sensors
  • Flash
  • GPS
  • Fingerprint
  • Camera
  • Offline charging.

Known Issues?
  • Call volume

Links
Installation
  1. Be sure to be on the latest stock firmware! Everything was tested based on the firmware: UMIDIGI_A5_Pro_V2.0_20210326
  2. Wipe->Wipe Data->yes
  3. Wipe->Advanced Wipe->Wipe System,Cache
  4. Reboot Recovery
  5. Install Zip->SD Card->CrDroid-A5_Pro-Unofficial.zip
  6. Install Zip->SD Card->open_gapps-arm64-11.0-nano.zip
  7. Install Zip->SD Card->Magisk.zip
XDA:DevDB Information
Lineage OS, ROM for the UMIDIGI A5 Pro/breeze


Contributors
Hadenix

ROM OS Version: Android 11
ROM Kernel: Linux 4.x
Based On: Lineage OS

Version Information
Status: Beta
Thank you for the information Hadenix. As much as I would like to upgrade my umidigi a5 pro to android 11, I'm afraid that I might not make it till the end. Would it be possible to provide a step by step tutorial on how to upgrade to android 11 as I am a newbie. Hoping for your help. Thank you
 

girlie08

New member
Jan 30, 2022
2
0
Hello. thanks for the rom!!

Just a question if ever you have a solution to my problem, after i install your rom it works fine i do like it.
Just that the previous games i was playing, i cant install it from google play store and some other similar store i tried multiple times checked my connection, uninstall update, clear storage, format etc but the problem still persist ..
//Not all of my games, 2 out of 3 were unable to install to my phone

if you or anyone have a solution i will appreciate it if you share it to me, thanks in advance!!


Fixed by deleting migrate-legacy-data-obb.sh using twrp.
How?
Go to TWRP
>Advance
>File Manager
>System folder
>bin folder
>look for migrate-legacy-data-obb.sh or migrate-legacy-obb-data.sh
>Delete and reboot

If you don't see system folder, mount it first!
Credits to the telegram group, most issue fix can be found there!
May I know the telegram group name?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    crdroid.jpg


    About
    CrDroid for UMIDIGI A5 Pro, with things that mostly work as expected. This ROM depends on the official image of the vendor, so make sure you are using the latest official build before installing this ROM on your device. Also, since these MTK devices often have a few odd variations, be aware that your crdroid may be different.

    Join my telegram channel to get latest updates
    UMIDIGI A5 Pro Updates

    Whats working?
    • Boots
    • RIL (Calls, SMS, Data)
    • Wi-Fi
    • Access point
    • Bluetooth
    • Video Playback
    • Audio
    • Sensors
    • Flash
    • GPS
    • Fingerprint
    • Camera
    • Offline charging.

    Known Issues?
    • Call volume

    Links
    Installation
    1. Be sure to be on the latest stock firmware! Everything was tested based on the firmware: UMIDIGI_A5_Pro_V2.0_20210326
    2. Wipe->Wipe Data->yes
    3. Wipe->Advanced Wipe->Wipe System,Cache
    4. Reboot Recovery
    5. Install Zip->SD Card->CrDroid-A5_Pro-Unofficial.zip
    6. Install Zip->SD Card->open_gapps-arm64-11.0-nano.zip
    7. Install Zip->SD Card->Magisk.zip
    XDA:DevDB Information
    Lineage OS, ROM for the UMIDIGI A5 Pro/breeze


    Contributors
    Hadenix

    ROM OS Version: Android 11
    ROM Kernel: Linux 4.x
    Based On: Lineage OS

    Version Information
    Status: Beta
    1
    Build Date - 14.04.2021

    CHANGELOG:

    - Source update, welcome version 7.5
    - Gboard: remove spacing on navigation bar
    - Add HotwordEnrollment support from Begoniain Q
    - Fix Ok Google (you need OpenGApps Nano to work)
    - Disable unspecialized app process pool (Zygote hooks doesn't work properly with USAP enabled)
    - update prebuild kernel from stock ROM V2.0 20210326


    Build Date - 09.04.2021

    CHANGELOG:

    - added CTS on R (test)
    - Workaround SafetyNet check
    - Did a test with "enforce selinux", the system booted but incoming calls did not work. returned "permissive". there will be time to watch later. at the moment, so!
    - Update build fingerprint to redfin 2021-04-05
    - ZRAM: take values from stock ROM
    - Returned the old path for solution for incoming calls
    - Set correct bootloader board name (Mediatek devices usually set bootloader board name via ro.product.board on /vendor/build.prop)
    - Sorting partitions in fstab


    Build Date - 05.04.2021

    CHANGELOG:

    - Solution for incoming calls (Hex edited)
    - Remove rild.libpath and rild.libargs props (These are defaults in mtk ril daemon)
    - Force enable VoLTE and VoWifi / Disable ViLTE
    - Toggle airplane mode on and off on boot (This hack needs ImsInit commit to request ims on boot to work properly)
    - Update networkAttributes
    - Add modified treble app (IMS)
    - Add WifiOverlay and TetheringConfigOverlay
    - Enable gestural navigation by default
    - Disable serial console notification
    - Fstab V1.9_20210226
    - Expand PRODUCT_DEXPREOPT_SPEED_APPS list
    - Update audio XML
    - Update shims for R
    - Add auto brightness option
    - Address rild denials for IMS
    - Add permissions for lock screen
    - AptX from begonia
    - Permissions for mediatek IMS
    - Use Prebuild APNS Config
    - Build AOSP RCS packages
    - Build libhidltransport/libhwbinder (Needed for old blobs)
    - Add Camera Privapp List
    - Adapt MTK offline charging for R
    - Set display DPI to 420
    - fix SELinux crashes
    - Add a new list of pinned file for the JIT in zygote
    - Add biometric sensor overlay
    - Turn on MAC Randomization
    - Kang brightness overlays
    - Update kernel from V1.9_20210226
    - Update pinned (Pixel 5)
    - Import of IDC and Keylayout
    - Hi, Android 11