[ROM][11.0][OFFICIAL][2021/02/19] Fluid 1.2 for Miatoll

Search This thread

RubenSan7

New member
Mar 10, 2021
2
2
I'm still on 1.3 but I know if I have Pocket Detection enabled under Fluid Customisations then I get quite a bit of battery drain. Not sure if it will help on 1.6 but might be worth a shot to disable that option if you have it on for those with battery drain.
 

oddyutza

Senior Member
Feb 26, 2009
55
5
miatoll fluid 1.6 does not boot - stuck in boot loop
miatoll fluid 1.2 does boot - has some glitches
too bad was a nice rom.
 

amfasis

Member
Mar 1, 2008
33
2
Velserbroek
Redmi Note 9 Pro
I have been using the 1.2 version for quite some time now. But lately I have noticed a huge hit on my dataplan, which is being eaten by "System updates" and once or twice a popup about "dynamic system update" (which after opening shows a dull busy indicator going on forever...). It seems no update can be done and a new try is carried out... disabling mobile data for this specific "app" is impossible (no switches show up on this item), so I have been disabling mobile data alltogether, which is far from ideal.
Does anyone know how to stop this nonsense? Or is it time to flash another rom?
 

fobtob387

Senior Member
Jan 28, 2017
343
94
Redmi Note 9 Pro
Redmi Note 10 Pro
I have been using the 1.2 version for quite some time now. But lately I have noticed a huge hit on my dataplan, which is being eaten by "System updates" and once or twice a popup about "dynamic system update" (which after opening shows a dull busy indicator going on forever...). It seems no update can be done and a new try is carried out... disabling mobile data for this specific "app" is impossible (no switches show up on this item), so I have been disabling mobile data alltogether, which is far from ideal.
Does anyone know how to stop this nonsense? Or is it time to flash another rom?
You can use AdGuard to disable internet access on either Mobile and/or Wifi for 'System Updates'.

1638514478333.png
 

Top Liked Posts

  • There are no posts matching your filters.
  • 22
    5hLHTa1.png



    Code:
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */


    Read the entire OP! Be respectful to each other and don't ask for ETAs, it's considered as being rude!


    xsOmpl0.png


    Fluid is an aftermarket Android custom ROM distribution based on AOSP, focused on bringing a better UI/UX to Android with a fluid experience coupled with themes and customisations.
    #FeelsFluid




    YxEFDix.png



    Fluid doesn't aim at providing all the customisation available on the planet. We are focused on a cleaner, more Material design approach, with a few twists ;) that assured, we do have a dedicated theme engine with cool stuff getting added every new update. So sit back and enjoy Fluid on your device!


    Code:
    - Fluid Themes
    - Adaptive Icon shapes
    - RGB Accent picker
    - Prebuilt Accents
    - Status bar icons
    - Lockscreen clocks with Fluid FingerSense
    - StatusBar Clock and Date customisation
    - Network traffic indicators
    - Network signal customisation
    - StatusBar icon tuner
    - Quick Settings Tiles customisation
    - Font engine
    - Live theme previews
    And most importantly:
    - A redefined UI


    Z2FIVZT.png




    Download Fluid for your device here!

    Miatoll


    JfsFznb.png


    Wanna experience Fluid on your phone? Go ahead fam!

    Code:
    - Download the ROM (Gapps included)
    - Backup every partition from OrangeFox Recovery
    - Make a full wipe (system, data, cache, dalvik)
    - Flash Latest FW (R India for Curtana, Q latest for Rest)
    - Flash the FluidOS zip
    - Flash Magisk (Optional and don't forget to enable Magisk hide of so After Boot)
    - Wipe cache!
    - And at last Reboot!
    [First boot will take a few minutes! Have patience]
    Clean Flash is always recommended!


    vYMqHGl.png



    Changelog for fluid


    Code:
    Fluid 1.1 Changelog 19/02/2021:
    - Fixed Mis Merges of LA.UM.9.1.r1-08300-SMxxx0.0 CAF tag.
    - Merged LA.UM.9.1.r1-8600-SMxxx0.0 latest CAF Tag.
    - Merged 4.14.221 Latest Android Common Linux Kernel Tag, Thanks, Alex!
    - Add QS Media Player toggle.
    - Fixed probably all brightness bar-related bugs (it jumping around when swiped and lag related to it).
    - New old-style data implementation.
    - Fixed pink color on WIFI QS detail view.
    - Re-added some audio props and configs, Thanks Sonal!
    - Added a long screenshot chip.
    - Redid system suspend wakeup calls sepolicy properly (partially).
    
    Fluid 1.1 Changelog 04/02/2021:
    - February security patch.
    - Network Indicator (works in header and status bar).
    - Fixes and other things nobody cares about.
    - Merged Latest LA.UM.9.1.r1-08300-SMxxx0.0 CAF tag.
    - Merged 4.14.217 Latest Android Common Linux Kernel Tag, Thanks, Alex!
    - Improved Vibrations, Thanks, Ctwoon!
    - Re-enabled Updatable Apexes, Thanks Sonal!
    - Fixed Idles and wakelocks by addressing their denials, Thanks, Sonal x2!
    - Changed power options menu's design.
    - Fixed Aux lenses access in some camera apps like CTGcam.
    
    Fluid 1.1 Changelog 25/01/2021:
    - Kernel Memory Leaks fixes, thanks to Alex!
    - Replaced Samsung's exFAT driver with a more updated one, Thanks to Alex!
    - Added missing exfat repo to (finally!) fix exfat.
    - Switched to Source-Built Soundtrigger HAL, Which should fix Audio lag/stutters on non-R miatoll devices, & Fix OK google on Non-Curtana devices.
    - Stopped enforcing AAC codec on SBC headphones.
    - Fixed Wired Audio Distortion on Max Volume.
    - Fixed Issues with Landscape Mode.
    - Fixed Color Mismatch on Fluid Logo in Settings.
    
    Fluid 1.1 Changelog 22/01/2021:
    - More Kernel Cleanup, thanks, Alex!
    - More Tree Cleanup, thanks, Sonal!
    - Fixed AAC codec
    - Gappless initial (Can not be dirty flashed on Gapped Builds)
    
    Fluid 1.1 Changelog 20/01/2021:
    - Do proper headset buttons mapping
    - Enabled Wifi WPA3-SAE
    - Enabled Wifi Channel Bonding Mode for 2.4GHz Wifi
    - Tree cleanup thanks to Sonal Singh
    - Switched to GCam Go
    - Extended ZRam to 2GBs thanks to dereference x2
    - Switched to the Non-cleanup demon kernel (which has exfat driver so that's fixed)
    - Centered punch hole in Status-bar
    - Allowed More Icons in Status-bar
    - Might have fixed Lag
    - Fixed broken fonts on different apps
    - Pocket mode
    - Added primary themes (pitch black, lighter gray, etc.)
    - Move blur toggle to display settings
    - Fixed type clock translations & it's bugs
    
    Fluid 1.1 Changelog 14/01/2021:
    - Disabled Security Path Spoofing
    - Fixed WFD (Thanks Raj & Sonal)
    - Resolved Neverallows (Thanks Sonal)
    - Fixed GBoard Spacing
    - Disabled Kernel Auditing
    - Fixed Some Lag
    - Some Kernel Stuff
    - Added two-button navigation in gestures
    - Added signature spoofing support
    - Fixed Date disappearing in Quick Settings
    - Added Lower Temps for nightlight
    - Add Wattage to advanced charging info
    
    YOU CAN'T DIRTY FLASH THIS BUILD, IT WILL BRICK YOUR PHONE
    
    Fluid 1.1 Changelog 13/01/2021:
    - Enforcing
    - Fix Off Screen Ok Google
    - Fix SafetyNet
    - Add Japan Region
    
    Fluid 1.1 Changelog 07/01/2021:
    - SafetyNet passed without Magisk
    - Fix SafetyNet for Joyeuse
    - Fix Device Name in about phone
    - Add Exit to Screenshot Dialogue
    - Fix Log Spam
    
    Fluid 1.1 Changelog 02/01/2021:
    - Initial Build
    
    A clean flash is always recommended. Bug reports are not appreciated if not clean flashed.
    Remove any kind of security PINs/Password and Fingerprints before flashing this build.


    6Fqfn5R.png

    Bug List:
    Code:
    None
    Wanna report bugs and want them begone? Give Logcats, mention your device name, mention if any mods and kernels, if used and please be specific about it. By helping us, you are helping yourself too.
    -> How to take Logcats?
    https://goo.gl/UcTM9 and https://goo.gl/J4CSEP


    Em5NS0v.png




    Visit our Website. Subscribe to our Telegram Announcements Channel. Also join our Telegram Community support Chat!

    Want to contribute to the development of this ROM?
    Checkout our Github

    Device Tree: DT
    Common Tree: CT
    Kernel Source: Kernel
    Vendor: Vendor

    hOjcXDi.png



    People behind this amazing ROM!


    - Ender1324
    - AndroBuddy
    - SebaUbuntu
    - Dyrex2004
    - Ovenoboyo


    3
    Hi, i might have an issue with this rom, sometime when i use luck patcher, i think the data partition starts to go crazy!

    Is this normally?
    Well, i can't say it's normal, but i also can't support all the mods you guys will use, it probably is due to the security in place on data partition on Android 11 by Google, but even if not, i don't endorse custom mods.
    2
    this won't be added as these are require xiaomiparts which i do not plan to add

    this won't be added as these require xiaomi parts which I do not intend to add.

    Ok well thanks for clarifying that the behaviour is intended. But surely waking the screen for notifications is a standard Android behaviour and not specific to Xiaomi code?

    Edit: I've found an app called Glimpse Notifications which seems to provide the functionality.
    2
    Been testing this for several weeks now. Unfortunately, as good & smooth as it feels, the battery consumption is just through the roof with barely 5h SoT. I'll be reverting to stock and debloat as usual.

    Thanks!