• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][11.0][OFFICIAL][25/12/2020] Fluid 1.1 for the Xiaomi Poco F1

Search This thread

hyborian

Senior Member
Oct 25, 2017
1,186
369
Taking a backup is the first step before installing any Rom. And if the device is encrypted then format data is mandatory while switching from A10 to A11 as encryption type is changing

Very true, this is Poco F1, with an external storage slot. One should make use of this increasingly rare feature and backup to sd card, always. Otherwise, less convenient, at least backup to pc or usb drive.
 

Rafael-SJC

Member
Dec 18, 2020
48
6
I have a brick that my device only works roms with Android 8.1, if I flash any firmware above it at boot time it appears the POCO logo and dies in Fastboot, I have not tried to do with Android 11 the firmware is inside the file? don't need to flash it separately before flashing the rom?
 

REIGNZ3

Recognized Developer
I have a brick that my device only works roms with Android 8.1, if I flash any firmware above it at boot time it appears the POCO logo and dies in Fastboot, I have not tried to do with Android 11 the firmware is inside the file? don't need to flash it separately before flashing the rom?
U need to flash firmware just follow the instructions
 

$lim $hady

Senior Member
Dec 30, 2012
685
188
Bangalore
Is anyone experiencing issue with brightness. I enable auto brightness and set minimum brightness to 25%, but after i reboot the phone, the minimum brightness will be set to 0% which makes phone display very dim.
 

manojkrs

Member
Dec 6, 2018
20
2
Fast charging is not working, intially I thought my charger or cable having some problems so bought new one but same issues. Any one can confirm if fast charging is working for them.

Second thing, volte icon remains same for vowifi also. Is it by design or I'm missing something here.
 

REIGNZ3

Recognized Developer
Fast charging is not working, intially I thought my charger or cable having some problems so bought new one but same issues. Any one can confirm if fast charging is working for them.

Second thing, volte icon remains same for vowifi also. Is it by design or I'm missing something here.
No it works
are u using stock kernel?
There is no vowifi icon so volte icon will works that way
 
  • Like
Reactions: gems.2000

soyelrafa

Member
Apr 28, 2012
9
3
Hello, I've been used since yesterday and I find it very good, thanks you for adding support for our device!

However, I found little issues on the fluid settings:

- (Themes tab) Lockscreen clock style won't change on the preview, I like the preview mode to see the changes, but in this case it doesn't work, it always shows you the default digital clock, even if you select the analogical clock.

- (QS Tab) I can't modify quick settings sliders, If I put for example 2 rows (landscape), after going back it will be restored.

Also, on lockscreen it appears one alarm like If I have it enabled, but I don't have any enabled. Actually, I removed all alarms to see if that solves the issue, but It didn't. I'm using default clock.

I think for those issues it's not necessary logcats, but I can make one if you think they could be useful.

Anyway, those little issues aren't anything against the great work you did, thanks you guys!
 

REIGNZ3

Recognized Developer
New build is up

Source Changelog:
• The security patch
• Network Indicator (works in header and statusbar)
• Fixed ram appearing lower than it should be
• Support for alert slider
• Support for prebuilt dynamic partitions
• A new build ending
• Fixes and other things nobody cares about

Device Changelog:
• Configure SQLite to operate in MEMORY mode
• Enable hal buffer management
• Extend buffer size to 256kb for offload playback
• Inline init scripts with crosshatch
• Switch Skia rendering backend to Vulkan
• Update perfconfigstore from CAF

Both vanilla and gapped are available

Download: https://fluidos.me/downloads
Device Group: http://t.me/fluid_beryllium
 

figure7810

Member
Sep 29, 2017
24
6
New build is up

Source Changelog:
• The security patch
• Network Indicator (works in header and statusbar)
• Fixed ram appearing lower than it should be
• Support for alert slider
• Support for prebuilt dynamic partitions
• A new build ending
• Fixes and other things nobody cares about

Device Changelog:
• Configure SQLite to operate in MEMORY mode
• Enable hal buffer management
• Extend buffer size to 256kb for offload playback
• Inline init scripts with crosshatch
• Switch Skia rendering backend to Vulkan
• Update perfconfigstore from CAF

Both vanilla and gapped are available

Download: https://fluidos.me/downloads
Device Group: http://t.me/fluid_beryllium
I have a question dear developer, why don't you add the media controls inside the QS panel ? Or at least give the option inside the configuration? Thanks in advance
 

Choco_martin

Senior Member
Feb 12, 2015
161
22
Bacoor
I've just tried installing last night, i can say this is a cool project you are doing! UI is so good and clean!

bugs: i'm on the latest build clean flashed GAPPED version, but it seems i'm having the slow charging issue as well, any thoughts on how to fix this?

charging right now: 10hrs until full :( i'm on stock kernel as well.
logcat

update: i've tried the vanilla version as well) but still slowly charging :( maybe i'm doing something wrong, please help.

steps in flashing:
1. Wipe Data,Cache,System,Internal storage
2. Flash 12.0.30.0 firmware for POCO F1
3. Flash Fluid rom
4. Flash Gapps (optional)
5. reboot to system

i've tried 3 different roms now crDroid, XSM and Fluid and slow charging in all of them :(
 
Last edited:

Choco_martin

Senior Member
Feb 12, 2015
161
22
Bacoor
I've just tried installing last night, i can say this is a cool project you are doing! UI is so good and clean!

bugs: i'm on the latest build clean flashed GAPPED version, but it seems i'm having the slow charging issue as well, any thoughts on how to fix this?

charging right now: 10hrs until full :( i'm on stock kernel as well.
logcat

update: i've tried the vanilla version as well) but still slowly charging :( maybe i'm doing something wrong, please help.

steps in flashing:
1. Wipe Data,Cache,System,Internal storage
2. Flash 12.0.30.0 firmware for POCO F1
3. Flash Fluid rom
4. Flash Gapps (optional)
5. reboot to system

i'm thinking it might be a firmware issue, what firmware do you guys recommend @REIGNZ3 ?
 

REIGNZ3

Recognized Developer
I've just tried installing last night, i can say this is a cool project you are doing! UI is so good and clean!

bugs: i'm on the latest build clean flashed GAPPED version, but it seems i'm having the slow charging issue as well, any thoughts on how to fix this?

charging right now: 10hrs until full :( i'm on stock kernel as well.
logcat

update: i've tried the vanilla version as well) but still slowly charging :( maybe i'm doing something wrong, please help.

steps in flashing:
1. Wipe Data,Cache,System,Internal storage
2. Flash 12.0.30.0 firmware for POCO F1
3. Flash Fluid rom
4. Flash Gapps (optional)
5. reboot to system

i've tried 3 different roms now crDroid, XSM and Fluid and slow charging in all of them :(
check ur cable or maybe charger
 
  • Like
Reactions: haldaios

Top Liked Posts

  • There are no posts matching your filters.
  • 25
    5hLHTa1.png


    Code:
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */


    Read the entire OP! Be respectful to each other and don't ask for ETAs, it's considered as being rude!


    xsOmpl0.png


    Fluid is an aftermarket Android custom ROM distribution based on AOSP, focused on bringing a better UI/UX to Android with a fluid experience coupled with themes and customisations.
    #FeelsFluid




    YxEFDix.png



    Fluid doesn't aim at providing all the customisation available on the planet. We are focused on a cleaner, more Material design approach, with a few twists ;) that assured, we do have a dedicated theme engine with cool stuff getting added every new update. So sit back and enjoy Fluid on your device!


    Code:
    - Fluid Themes
    - Adaptive Icon shapes
    - Prebuilt Accents
    - Status bar icons
    - Double tap power button for Camera
    - StatusBar Clock and Date customisation
    - Fod Animation
    - StatusBar icon tuner
    - Quick Settings Tiles customisation
    - Font engine
    - Live theme previews
    And most importantly:
    - A redefined UI


    Z2FIVZT.png




    Download Fluid for your device here!

    Poco F1


    JfsFznb.png


    Wanna experience Fluid on your phone? Go ahead fam!

    Code:
    - Download the ROM variant of your choice (Gapp-ed for inbuilt gapps, Gapp-less for vanilla experience)
    - Backup every partition from TWRP Recovery
    - Make a full wipe (system, data, cache, dalvik)
    - Flash the FluidOS zip
    - Install GAPPS package (only if using gapp-less variant)
    - Wipe cache!
    - And at last Reboot!
    [First boot will take a few minutes! Have patience]
    Clean Flash is always recommended!


    vYMqHGl.png



    Changelog for fluid


    Code:
     Fluid 1.2 Changelog 03/02/2021
    - The security patch
    - Network Indicator (works in header and statusbar)
    - Fixed ram appearing lower than it should be
    - Support for alert slider
    - Support for prebuilt dynamic partitions
    - A new build ending
    - Fixes and other things nobody cares about
    - And device support fixes and other stuff from Q this isnt the final update for the year
    
    A clean flash is always recommended. Bug reports are not appreciated if not clean flashed.
    Remove any kind of security PINs/Password and Fingerprints before flashing this build.


    6Fqfn5R.png



    Wanna report bugs and want them begone? Give Logcats, mention your device name, mention if any mods and kernels, if used and please be specific about it. By helping us, you are helping yourself too.
    -> How to take Logcats?
    https://goo.gl/UcTM9 and https://goo.gl/J4CSEP


    Em5NS0v.png




    Visit our Website. Subscribe to our Telegram Announcements Channel. Also join our Telegram Community support Chat!

    Want to contribute to the development of this ROM?
    Checkout our Github

    Kernel Source

    hOjcXDi.png



    People behind this amazing ROM!


    - Ender1324
    - AndroBuddy
    - SebaUbuntu
    - Dyrex2004
    - Ovenoboyo


    11
    New build is up

    Source Changelog:
    • Switched to snap cam
    • Fixed broken fonts on different apps
    • Pocket mode
    • Added primary themes (pitch black, lighter gray etc.)
    • Added signature spoofing support
    • Fixed date on header disappearing when adding date in statusbar
    • Re-added 2 button navbar
    • Move blur toggle to display settings
    • Fixed typeclock translations and bugs related to it
    • Added pixel blue and oneplus red accent
    • No new changes to UI in this update

    Device Changelog:
    • Add MIUI camera flag from stock
    • Add Bonito brightness curve
    • Configure optimal cpusets
    • Disable wide color display
    • Enable HDR
    • Enable vibration multiple intensities
    • Fixed ANX Camera default permissions getting resetted after every dirty flash
    • Import renderscript drivers from crosshatch
    • Mark WifiOverlay as coreApp
    • Shorten wait time for services exit to optimize shutdown time
    • Update to MIUI V12.0.3.0 blobs

    Both vanilla and gapped are available

    Download: https://fluidos.me/downloads
    Device Group: http://t.me/fluid_beryllium
    9
    Upcoming update will have both vanilla and gapps
    8
    Known bugs as of now
    • None
    • Report if you found any

    Note:
    - If coming from a10 encrypted need to format data and flash force encrypt zip
    8
    New build is up

    Source Changelog:
    • The Security Patch
    • Updated sepolicy
    • Fixed volume panel not working properly on landscape (notched devices only)
    • Min/Max toggle for adaptive refresh rate
    • Performance Improvements

    Device Changelog:
    • Address thermal engine and fingerprint denials
    • Add only certified configuration methods for wpa_supplicant
    • Build power-off charging daemon dependency
    • Enable Stereo channel support for voip over audio path
    • Enable incall music support
    • Misc fixes and improvement
    • Remove TDLS INI from ini file
    • Tuned haptic feedback
    • Update whitelisting for HotwordEnrollment

    Both vanilla and gapped are available

    Download: https://fluidos.me/downloads
    Device Group: http://t.me/fluid_beryllium