[ROM][11.0][OFFICIAL][CEPHEUS] crDroid v7.4 [02.04.2021]

Search This thread

DavidRJ

Member
Oct 24, 2011
49
24
38
Hi there,

first of all great ROM, very stable so far.

I have a question for users of Android Auto with this ROM (USB to car, not just app):
How have you set it up to work reliably? I clean flashed the ROM, and the NickGapps AA addon. Android Auto kinda works, but very unreliable. Sometimes it disconnects randomly, showing communication error 11.
Sometimes the phone does not get recognized until I choose "file transfer" as USB mode. So what are the correct settings to make Android Auto work reliably? USB debugging on/off? Etc.
 

ckarv

Senior Member
Dec 7, 2012
322
64
58
Hi there,

first of all great ROM, very stable so far.

I have a question for users of Android Auto with this ROM (USB to car, not just app):
How have you set it up to work reliably? I clean flashed the ROM, and the NickGapps AA addon. Android Auto kinda works, but very unreliable. Sometimes it disconnects randomly, showing communication error 11.
Sometimes the phone does not get recognized until I choose "file transfer" as USB mode. So what are the correct settings to make Android Auto work reliably? USB debugging on/off? Etc.

Are you using AA wirelessly or wired?

I'm experiencing similar instability issues with my phone using wireless AA. Haven't tried wired. Same error 11.
 

ai5g

Member
May 1, 2017
37
8
8
I have reported a problem with system sounds a few days ago, but didn't get any answers yet. Does anyone experience these problems or is there a solution to this problem?

All system sounds (ring tones etc.) include some crackling noises, but music players work normally. Also, I cannot find the actual sound files on the device.
 

ckarv

Senior Member
Dec 7, 2012
322
64
58
I have reported a problem with system sounds a few days ago, but didn't get any answers yet. Does anyone experience these problems or is there a solution to this problem?

All system sounds (ring tones etc.) include some crackling noises, but music players work normally. Also, I cannot find the actual sound files on the device.

My sounds are okay. I do have the full NikGapps installed though, not sure if that includes some additional/different ringtones compared to yours.

Screenshot_20210224-090353_Sounds.png
 

liqsliu

Member
May 7, 2019
9
0
11
I have reported a problem with system sounds a few days ago, but didn't get any answers yet. Does anyone experience these problems or is there a solution to this problem?

All system sounds (ring tones etc.) include some crackling noises, but music players work normally. Also, I cannot find the actual sound files on the device.
same problem, but rom is "havoc os".
 

Laptapper

Senior Member
Jan 17, 2016
606
221
63
Redmi Note 10 Pro
AI Button remap yourself with changing key 689 in gpio-keys.kl :
"Camera (CAMERA)"
"Screenshot (SYSRQ)"
"Google Search (SEARCH)"
"Google Voice (VOICE_ASSIST)"
"Call (CALL)"
"Contacts (CONTACTS)"
"Music Player (MUSIC)"
"Mute/Unmute Media Volume (VOLUME_MUTE)"
"Play/Pause Media (MEDIA_PLAY_PAUSE)"
"Next Media (MEDIA_NEXT)"
"Recent Apps (APP_SWITCH)"
"Open/Close Quick Settings (QPANEL_ON_OFF)"
"Internet Browser (EXPLORER)"
"Calendar (CALENDAR)"
"Calculator (CALCULATOR)"
"No Function (NOF)"
 

AJSRO

Member
Feb 7, 2021
9
3
13
Hi, first I want to thank the developer for taking the time to create such a great ROM.
I recently started testing CrDroid, started with version 6.13 and was totally delighted with this Custom ROM. Now I wanted to try the latest available (7.3), but I had a lot of trouble doing the installation.
In the end, it seems that this version does not support FlameGapps and the only way to get a correct installation is by using NikGapps. I hope that later there may be compatibility with other Gapps.
Excellent work, I will look forward to future updates.
 

Top Liked Posts

  • 1
    Please fix the issue where you need GApps in order to use the ROM.

    I want to use this ROM, but I can't due to you forcing people to use GApps. I'm a microg user and I've been using microg previously with crdroid, however suddenly I couldn't after the 7.2 or 7.3 update.

    Please fix this.
  • 17
    :cowboy: FLASHING TIME :cowboy:
    NEW crDroid BUILD 30.03.2021

    DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

    crDroid statistics :cool:


    SELINUX PERMISSIVE


    crDroidAndroid-11.0-20210330-cepheus-v7.4.zip


    NOTE : DO READ CAREFULLY

    • DO flash new fw V12.0.4.0.QFAEUXM when not on this version
    • Clean or dirty flash possible
    • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
    • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
    • When clean flash, just follow steps below or read OP
    • Join also our new TG crDroid MI9
    • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP/STUCK ON crDroid LOGO !! (maybe also re-install some apps that force close)
    • Dirty flash may cause some google apps to be re-installed
    • If Magisk is not working properly, just re-install it from scratch

    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Xiaomi MI9 (cepheus)
    Device maintainer: raystef66
    Required firmware: V12.0.4.0.QFAEUXM !!


    INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

    1. wipe system, data, dalvik/chache
    2. format data, reboot twrp
    3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.4.0.QFAEUXM !!
    4. flash crDroid 7.4, reboot twrp
    5. flash magisk 22.0, DFE
    6. flash Nikgapps Basic (reflash if stuck on boot !)
    7. boot & ENJOY
    ====================
    30-03-2021
    ====================

    * redesigned recents view buttons
    * added back share button on recents
    * fixed BT audio to speaker toggle
    * allow user to disable night light on lockscreen when FOD active
    * smart pull down
    * screen off animations
    * added Fluid, Sneeky, Spectrum, Orono Analog Clock
    * intruduce Applock
    * added new faceunlock
    * fixed auth overlay (bank apps...)
    * fix screenshot type for three-finger-screenshot
    * add QS Header data usage info
    * removed divider between QS tiles and media player
    * allow using face as auth method on some apps
    * remove extra space for hotseat for Launcher
    * added option to theme settings dashboard icons
    * added Pixel Navbar animation toggle
    * synced with latest sources
    * updated translations
    * some other fixes and improvements


    Thxn @toscha42 for your donation - appreciated !
    15
    :cowboy: FLASHING TIME :cowboy:
    NEW crDroid BUILD 02.04.2021

    DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

    crDroid statistics :cool:


    SELINUX ENFORCING


    crDroidAndroid-11.0-20210402-cepheus-v7.4.zip


    NOTE : DO READ CAREFULLY

    • Clean flash needed !!!
    • NO need to flash FW
    • Join also our new TG crDroid MI9
    • When having issues to setup FP check HERE

    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Xiaomi MI9 (cepheus)
    Device maintainer: raystef66
    Required firmware: build-in MIUI China Beta 21.3.10 FW


    INSTALLATION : CLEAN !! SO DO BACKUP ALL IN CASE WHEN NEED TO RESTORE

    1. wipe system, vendor, data, dalvik/chache
    2. format data, reboot twrp
    3. flash crDroid 7.4
    4. flash Gapps ( I'm using NikGapps Basic with build-in YT vanced - when other version chosen use CORE version - all up to you)
    5. flash magisk 22.0 (optional), DFE (optional)
    6. boot & ENJOY
    ====================
    02-04-2021
    ====================

    * trees rebased on Evasi0nXiao (TG) --> huge thnx @Fr1endsh1p !!!
    * SELinux Enforcing
    * WFD working
    * SafetyNet pass
    * added smart charging
    * working DC Dimming
    * LiveDisplay
    * OK Google (install assistant+Google)
    * Kernel upstreamed to 4.14.225
    * synced with latest sources
    * updated translations
    * some other fixes and improvements

    Kernel source :

    BUG LIST :


    * ANX not fully working
    * charging led not working
    4
    There is only one version for Android 11. It's v185R + 48MPFixR v201.
    3
    Does this rom have the smartbar navbar I'm using it on another rom if not could you add it
    Does this rom have the smartbar navbar if not could you add it
    Does this rom have the latest smartbar built in ?
    Does this rom have the latest version of the smartbar

    @musicman5844, as per the Forum Rules:

    5. Create a thread topic or post a message only once, this includes external links & streaming media.

    As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
    • You can bump your unanswered question once every 24 hours
    • Duplicate threads and posts will be removed

    I've gone ahead and removed your duplicate posts. Kindly consider this a friendly reminder to not spam the thread with repeated questions and wait for someone to respond. This goes for the other threads you've posted the question in too, repeatedly. Further rule violations or spamming may attract more serious consequences.

    Regards,
    shadowstep
    Forum Moderator
    2
    Thanks, but this one does not seem to be working on the newest ROM 7.x.
    Which version do you exactly mean?
    I also recomend GCam Urnyx's 7.3 v2.5 with marian configs:
    Best photos. For video and zoom ANX is better.
  • 25
    :cowboy: FLASHING TIME :cowboy:
    NEW crDroid BUILD 12.01.2021

    DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

    crDroid statistics :cool:


    SELINUX PERMISSIVE


    crDroidAndroid-11.0-20210112-cepheus-v7.2.zip


    NOTE :

    • DO flash new fw V12.0.3.0.QFAEUXM
    • Clean or dirty flash possible
    • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
    • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
    • When clean flash, just follow steps below or read OP
    • Join also our new TG crDroid MI9
    • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP !

    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Xiaomi MI9 (cepheus)
    Device maintainer: raystef66
    Required firmware: V12.0.3.0.QFAEUXM


    INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

    1. wipe system, data, dalvik/chache
    2. format data, reboot twrp
    3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.3.0.QFAEUXM
    4. flash crDroid 7.2, reboot twrp
    5. flash modded magisk or magisk 21.2, DFE
    6. flash Nikgapps Basic
    7. boot & ENJOY
    ====================
    12-01-2021
    ====================

    * updated DRM/WIDEVINE blobs
    * fixed issues on Netflix, Chrome...
    21
    :cowboy: FLASHING TIME :cowboy:
    NEW crDroid BUILD 11.03.2021

    DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

    crDroid statistics :cool:


    SELINUX PERMISSIVE


    crDroidAndroid-11.0-20210311-cepheus-v7.4.zip


    NOTE :

    • DO flash new fw V12.0.4.0.QFAEUXM
    • Clean or dirty flash possible
    • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
    • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
    • When clean flash, just follow steps below or read OP
    • Join also our new TG crDroid MI9
    • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP/STUCK ON crDroid LOGO !! (maybe also re-install some apps that force close)

    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Xiaomi MI9 (cepheus)
    Device maintainer: raystef66
    Required firmware: V12.0.4.0.QFAEUXM !!


    INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

    1. wipe system, data, dalvik/chache
    2. format data, reboot twrp
    3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.4.0.QFAEUXM !!
    4. flash crDroid 7.4, reboot twrp
    5. flash magisk 21.4 (22.0), DFE
    6. flash Nikgapps Basic (reflash if stuck on boot)
    7. boot & ENJOY
    ====================
    11-03-2021
    ====================

    * updated to crDroid 7.4 code
    * updated to sec. patch level 2021.03.05
    * updated to march Coral fingerprint
    * added theme settings dashboard icons
    * moved charging sound settings to crDroid Settings
    * added toggle to play a sound when battery fully charged
    * added toggle to vibrate when fully charged
    * added switch styles (crDroidSettings -> UI)
    * added 404 IDE Clock (Settings -> Display -> Style and Wallpaper -> Clock)
    * changed to seekbar option for font size and icon size options on Launcher
    * fixed partial screenshot option* synced with latest sources
    * updated translations
    * some other fixes and improvements

    Thxn @soman123 for your donation - appreciated !
    21
    :cowboy: FLASHING TIME :cowboy:
    NEW crDroid BUILD 09.01.2021

    DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

    crDroid statistics :cool:


    SELINUX PERMISSIVE


    crDroidAndroid-11.0-20210109-cepheus-v7.2.zip


    NOTE :

    • DO flash new fw V12.0.3.0.QFAEUXM
    • Clean or dirty flash possible
    • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
    • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
    • When clean flash, just follow steps below or read OP
    • Join also our new TG crDroid MI9
    • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP !

    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Xiaomi MI9 (cepheus)
    Device maintainer: raystef66
    Required firmware: V12.0.3.0.QFAEUXM


    INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

    1. wipe system, data, dalvik/chache
    2. format data, reboot twrp
    3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.3.0.QFAEUXM
    4. flash crDroid 7.2, reboot twrp
    5. flash modded magisk or magisk 21.2, DFE
    6. flash Nikgapps Basic
    7. boot & ENJOY
    ====================
    09-01-2021
    ====================

    * updated to crDroid 7.2 code
    * updated to sec. patch level 2021.01.05
    * moved to Coral januari fingerprint
    * fixed wallpaper tap to change
    * added dt2s
    * added ambient display features
    * relit QTI BT stack
    * iorap enabled by default
    * fixed old style mobile data indicators
    * 4.14.213 Quantic-illusion
    * added allow to hide arrow on back gesture
    * added custom length of gesture navbar
    * added hide gesture navbar option
    * added FOD customization options
    * added FOD icon picker
    * added FOD with screen off
    * added FOD animation toggle and styles
    * added FOD icon color option
    * added a toast message to alert slider switch
    * added battery estimate on QS
    * added blur option toggle switch (Settings -> Display)
    * added lock screen clock styles
    * made power-off alarm working again
    * synced with latest sources
    * updated translations
    * some other fixes and improvements
    21
    :cowboy: FLASHING TIME :cowboy:
    NEW crDroid BUILD 12.02.2021

    DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

    crDroid statistics :cool:


    SELINUX PERMISSIVE


    crDroidAndroid-11.0-20210212-cepheus-v7.3.zip


    NOTE :

    • DO flash new fw V12.0.4.0.QFAEUXM
    • Clean or dirty flash possible
    • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
    • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
    • When clean flash, just follow steps below or read OP
    • Join also our new TG crDroid MI9
    • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP/STUCK ON crDroid LOGO !
    • IMPORTANT : due to changes on sources it may happen that some icon apps on homescreen are rearranged

    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Xiaomi MI9 (cepheus)
    Device maintainer: raystef66
    Required firmware: V12.0.4.0.QFAEUXM !!


    INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

    1. wipe system, data, dalvik/chache
    2. format data, reboot twrp
    3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.4.0.QFAEUXM !!
    4. flash crDroid 7.2, reboot twrp
    5. flash modded magisk (clean flash) or magisk 21.4, DFE
    6. flash Nikgapps Basic
    7. boot & ENJOY
    ====================
    12-02-2021
    ====================

    * updated to crDroid 7.3 code
    * updated to sec. patch level 2021.02.05
    * updated to februari Coral fingerprint
    * added option to record screen in lower quality
    * added ability to set different ringtone for multi-sim
    * added QS tile styles
    * added string for Deep Sleep percentage
    * added AOD when charging toggle
    * added Ambient Display pulse visualizer
    * added QS footer icon visibility toggles
    * added edge lighting for ambient pulse notification toggle
    * added toggle to suppress notification sound when screen on
    * addressed 0.8 font scaling bug
    * synced with latest sources
    * updated translations
    * some other fixes and improvements
    20
    :cowboy: FLASHING TIME :cowboy:
    NEW crDroid BUILD 06.02.2021

    DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

    crDroid statistics :cool:


    SELINUX PERMISSIVE


    crDroidAndroid-11.0-20210206-cepheus-v7.2.zip


    NOTE :

    • DO flash new fw V12.0.4.0.QFAEUXM
    • Clean or dirty flash possible
    • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
    • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
    • When clean flash, just follow steps below or read OP
    • Join also our new TG crDroid MI9
    • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP !
    • IMPORTANT : due to changes on sources it may happen that some icon apps on homescreen are rearranged

    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Xiaomi MI9 (cepheus)
    Device maintainer: raystef66
    Required firmware: V12.0.4.0.QFAEUXM !!


    INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

    1. wipe system, data, dalvik/chache
    2. format data, reboot twrp
    3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.4.0.QFAEUXM !!
    4. flash crDroid 7.2, reboot twrp
    5. flash modded magisk (clean flash) or magisk 21.4, DFE
    6. flash Nikgapps Basic
    7. boot & ENJOY
    ====================
    06-02-2021
    ====================

    * vendor sec.patch level 2021.01.01
    * 4.14.215 Quantic-illusion
    * fixed L1 widevine level
    * fixed ANX portrait bug
    * fixed SafetyNet works out of the box
    * added QS tint
    * added QS status bar opacity
    * added faceunlock animation
    * added incall vibration options
    * reduced app label text size (5x5 grid)
    * improved navigation mode settings (back gesture)
    * fix black screen issue due to wallpaper decoding exceptions
    * QS detail improvements
    * add button to AppErrorDialog to upload crash information to dogbin
    * synced with latest sources
    * updated translations
    * some other fixes and improvements

    thnx @Rilindd for testing L1 !
    thnx to Sebastian K. for your donation! Appreciated!
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone