[ROM][11.0][OFFICIAL][CEPHEUS] crDroid v7.5 [14.04.2021]

Search This thread

Max Line

Member
Jun 3, 2017
11
2
Not working after flash xiaomi fastboot rom or later after custom rom?
May persist.img is damaged?
Don't think so. Other roms are working fine like I mentioned earlier. I've been using crdroid for a while + tried havocos a few hours ago and didn't have an issue there either.

And yes, it's not working after flashing xiaomi fastboot rom.
 

Laptapper

Senior Member
Jan 17, 2016
609
222
Redmi Note 10 Pro
Don't think so. Other roms are working fine like I mentioned earlier. I've been using crdroid for a while + tried havocos a few hours ago and didn't have an issue there either.

And yes, it's not working after flashing xiaomi fastboot rom.

Perhaps we misunderstood us.
You mean fastboot flash xiaomi isn't working but if you flash then havoc it's ok? Only crdroid 7.3 isn't working?
I thougt nothing working anymore...
 

Max Line

Member
Jun 3, 2017
11
2
Perhaps we misunderstood us.
You mean fastboot flash xiaomi isn't working but if you flash then havoc it's ok? Only crdroid 7.3 isn't working?
I thougt nothing working anymore...
Excuse me for not making my self clear.

Only thing that isn't working is crdroid from version 7.2-7.3.

I tried flashing every single version to see which version would not boot loop, and the only ones that bootlooped were 7.3 and 7.2.
If I flash 7.1, it works, same with 7.0.

Flashing the stock global rom via fastboot works ok.

I hope I'm not being too confusing.
 

AJSRO

Member
Feb 7, 2021
9
3
Anyone get 48mp mode working on camera? I cant seem to get working with either gcam or anx. Only current downside to rom for me rn, everything else working perfectly or better.

So far I have not been able to use the 48 MP of the ANX camera satisfactorily in any AOSP with A11 that I have tested.
The only AOSP that I liked for including it in its ROM and fully functional was precisely CrDroid, but in its version 6.13
 

Riichard63

Senior Member
Jan 23, 2013
1,043
524
Anyone get 48mp mode working on camera? I cant seem to get working with either gcam or anx. Only current downside to rom for me rn, everything else working perfectly or better.

Strangly by my side the eszdman module wasn't working on android 10 no matter which rom I was using (black viwfinder and crashing camera app). Now on Android 10 this module just works fine. And I have no issue with ANX camera, I installed it as magisk module. I took latest version from Noid and the 48 Mpx fix for android R ( 48MPFix For R / ANXMiuiLibs For R )
 

raystef66

Recognized Developer / Recognized Contributor
Jul 2, 2013
2,141
6,265
:cowboy: FLASHING TIME :cowboy:
NEW crDroid BUILD 11.03.2021

DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

crDroid statistics :cool:


SELINUX PERMISSIVE


crDroidAndroid-11.0-20210311-cepheus-v7.4.zip


NOTE :

  • DO flash new fw V12.0.4.0.QFAEUXM
  • Clean or dirty flash possible
  • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
  • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
  • When clean flash, just follow steps below or read OP
  • Join also our new TG crDroid MI9
  • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP/STUCK ON crDroid LOGO !! (maybe also re-install some apps that force close)

Highlights & Device Specific Changes:
Build type: Monthly
Device: Xiaomi MI9 (cepheus)
Device maintainer: raystef66
Required firmware: V12.0.4.0.QFAEUXM !!


INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

  1. wipe system, data, dalvik/chache
  2. format data, reboot twrp
  3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.4.0.QFAEUXM !!
  4. flash crDroid 7.4, reboot twrp
  5. flash magisk 21.4 (22.0), DFE
  6. flash Nikgapps Basic (reflash if stuck on boot)
  7. boot & ENJOY
====================
11-03-2021
====================

* updated to crDroid 7.4 code
* updated to sec. patch level 2021.03.05
* updated to march Coral fingerprint
* added theme settings dashboard icons
* moved charging sound settings to crDroid Settings
* added toggle to play a sound when battery fully charged
* added toggle to vibrate when fully charged
* added switch styles (crDroidSettings -> UI)
* added 404 IDE Clock (Settings -> Display -> Style and Wallpaper -> Clock)
* changed to seekbar option for font size and icon size options on Launcher
* fixed partial screenshot option* synced with latest sources
* updated translations
* some other fixes and improvements

Thxn @soman123 for your donation - appreciated !
 

Attachments

  • Image3297719953355904552.jpg
    Image3297719953355904552.jpg
    41.5 KB · Views: 194
  • Image1628758395051638777.jpg
    Image1628758395051638777.jpg
    29.2 KB · Views: 191
  • Image380599274090237948.jpg
    Image380599274090237948.jpg
    25.9 KB · Views: 171
  • Image8569819957368016624.jpg
    Image8569819957368016624.jpg
    42.9 KB · Views: 166
  • Image6836684764688006354.jpg
    Image6836684764688006354.jpg
    23.8 KB · Views: 158
  • Image7008090294219833408.jpg
    Image7008090294219833408.jpg
    21.1 KB · Views: 192

XDA_Lurker

Member
Nov 7, 2009
7
2
:cowboy: FLASHING TIME :cowboy:
NEW crDroid BUILD 11.03.2021

<snip>​

I was presented with an "Update" available through the system. I allowed it to download and reboot to TWRP. It acted like it upgraded. However now it only bootloops to TWRP.

No biggie. I'll do a clean install again.

I just thought I'd let you know that the auto-update is funky.
 

Riichard63

Senior Member
Jan 23, 2013
1,043
524
I was presented with an "Update" available through the system. I allowed it to download and reboot to TWRP. It acted like it upgraded. However now it only bootloops to TWRP.

No biggie. I'll do a clean install again.

I just thought I'd let you know that the auto-update is funky.
Dirty flash made my device bootloop too. Sadly the DM verity and force encrypt disabler is not mandatory.
 

neroes

Senior Member
Jul 11, 2013
51
11
Braunschweig
www.soundcloud.de
:cowboy: FLASHING TIME :cowboy:
NEW crDroid BUILD 11.03.2021

DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

crDroid statistics :cool:


SELINUX PERMISSIVE


crDroidAndroid-11.0-20210311-cepheus-v7.4.zip


NOTE :

  • DO flash new fw V12.0.4.0.QFAEUXM
  • Clean or dirty flash possible
  • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
  • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
  • When clean flash, just follow steps below or read OP
  • Join also our new TG crDroid MI9
  • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP/STUCK ON crDroid LOGO !! (maybe also re-install some apps that force close)

Highlights & Device Specific Changes:
Build type: Monthly
Device: Xiaomi MI9 (cepheus)
Device maintainer: raystef66
Required firmware: V12.0.4.0.QFAEUXM !!


INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

  1. wipe system, data, dalvik/chache
  2. format data, reboot twrp
  3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.4.0.QFAEUXM !!
  4. flash crDroid 7.4, reboot twrp
  5. flash magisk 21.4 (22.0), DFE
  6. flash Nikgapps Basic (reflash if stuck on boot)
  7. boot & ENJOY
====================
11-03-2021
====================

* updated to crDroid 7.4 code
* updated to sec. patch level 2021.03.05
* updated to march Coral fingerprint
* added theme settings dashboard icons
* moved charging sound settings to crDroid Settings
* added toggle to play a sound when battery fully charged
* added toggle to vibrate when fully charged
* added switch styles (crDroidSettings -> UI)
* added 404 IDE Clock (Settings -> Display -> Style and Wallpaper -> Clock)
* changed to seekbar option for font size and icon size options on Launcher
* fixed partial screenshot option* synced with latest sources
* updated translations
* some other fixes and improvements

Thxn @soman123 for your donation - appreciated !
No update OTA possible
No clean flash possible.
No dirty update possible.

Something is wrong

#edit
  1. wipe system, data, dalvik/chache
  2. format data, reboot twrp
  3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.4.0.QFAEUXM !!
  4. flash crDroid 7.4, reboot twrp
  5. flash magisk 21.4 (22.0), DFE
  6. flash Nikgapps Basic (reflash if stuck on boot)
  7. boot & ENJOY
  8. Format Data !!!
 
Last edited:
  • Like
Reactions: mryabets

scooby5559

Member
Jul 17, 2010
20
6
27w charging working sir?
Su
No update OTA possible
No clean flash possible.
No dirty update possible.

Something is wrong

#edit
  1. wipe system, data, dalvik/chache
  2. format data, reboot twrp
  3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.4.0.QFAEUXM !!
  4. flash crDroid 7.4, reboot twrp
  5. flash magisk 21.4 (22.0), DFE
  6. flash Nikgapps Basic (reflash if stuck on boot)
  7. boot & ENJOY
  8. Format Data !!!
Only issue (OTA update) after installing NIKIGAPPS was a few force closes but uninstalling and installing again fixed everything. ROM seems quicker than last release too.
 
  • Like
Reactions: raystef66

Top Liked Posts

  • There are no posts matching your filters.
  • 25
    :cowboy: FLASHING TIME :cowboy:
    NEW crDroid BUILD 14.04.2021

    DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

    crDroid statistics :cool:


    SELINUX ENFORCING


    crDroidAndroid-11.0-20210414-cepheus-v7.5.zip


    NOTE : DO READ CAREFULLY

    • NO need to flash FW
    • Join also our new TG crDroid MI9
    • When having issues to setup FP check HERE
    • When wanting to boot WITHOUT GAPPS : go into TWRP and remove 2 Hotwordenrollment apk's under system/product/priv-app
    • When having WIFI issues : WIFI FIX

    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Xiaomi MI9 (cepheus)
    Device maintainer: raystef66
    Required firmware: build-in

    INSTALLATION : DIRTY (coming from latest cr7.4 !!)

    1. wipe dalvik/chache
    2. flash crDroid 7.5
    3. reboot twrp
    4. flash Gapps when having boot issue
    5. flash magisk 22.0 (optional), DFE (optional)
    6. boot & ENJOY


    INSTALLATION : CLEAN !! SO DO BACKUP ALL IN CASE WHEN NEED TO RESTORE

    1. wipe system, vendor, data, dalvik/chache
    2. format data, reboot twrp
    3. flash crDroid 7.5
    4. flash Gapps ( I'm using NikGapps Basic with build-in YT vanced - when other version chosen use CORE version - all up to you)
    5. flash magisk 22.0 (optional), DFE (optional)
    6. boot & ENJOY
    ====================
    14-04-2021
    ====================

    * updated to crDroid 7.5 code
    * updated to sec. patch level 2021.04.05
    * updated vendor from 21.4.7
    * vendor sec. patch level 2021.04.01
    * kernel upstreamed to 4.14.230
    * add tile to show power menu
    * added OxygenOS lockscreen clock
    * added long screenshot (test)
    * fixed charging led
    * synced with latest sources
    * updated translations
    * some other fixes and improvements

    BUG LIST :

    * ANX not fully working
    * FPS not showing up

    thnx @Fr1endsh1p
    thnx @roxdragon for your donation!
    17
    :cowboy: FLASHING TIME :cowboy:
    NEW crDroid BUILD 30.03.2021

    DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

    crDroid statistics :cool:


    SELINUX PERMISSIVE


    crDroidAndroid-11.0-20210330-cepheus-v7.4.zip


    NOTE : DO READ CAREFULLY

    • DO flash new fw V12.0.4.0.QFAEUXM when not on this version
    • Clean or dirty flash possible
    • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
    • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
    • When clean flash, just follow steps below or read OP
    • Join also our new TG crDroid MI9
    • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP/STUCK ON crDroid LOGO !! (maybe also re-install some apps that force close)
    • Dirty flash may cause some google apps to be re-installed
    • If Magisk is not working properly, just re-install it from scratch

    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Xiaomi MI9 (cepheus)
    Device maintainer: raystef66
    Required firmware: V12.0.4.0.QFAEUXM !!


    INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

    1. wipe system, data, dalvik/chache
    2. format data, reboot twrp
    3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.4.0.QFAEUXM !!
    4. flash crDroid 7.4, reboot twrp
    5. flash magisk 22.0, DFE
    6. flash Nikgapps Basic (reflash if stuck on boot !)
    7. boot & ENJOY
    ====================
    30-03-2021
    ====================

    * redesigned recents view buttons
    * added back share button on recents
    * fixed BT audio to speaker toggle
    * allow user to disable night light on lockscreen when FOD active
    * smart pull down
    * screen off animations
    * added Fluid, Sneeky, Spectrum, Orono Analog Clock
    * intruduce Applock
    * added new faceunlock
    * fixed auth overlay (bank apps...)
    * fix screenshot type for three-finger-screenshot
    * add QS Header data usage info
    * removed divider between QS tiles and media player
    * allow using face as auth method on some apps
    * remove extra space for hotseat for Launcher
    * added option to theme settings dashboard icons
    * added Pixel Navbar animation toggle
    * synced with latest sources
    * updated translations
    * some other fixes and improvements


    Thxn @toscha42 for your donation - appreciated !
    15
    :cowboy: FLASHING TIME :cowboy:
    NEW crDroid BUILD 02.04.2021

    DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

    crDroid statistics :cool:


    SELINUX ENFORCING


    crDroidAndroid-11.0-20210402-cepheus-v7.4.zip


    NOTE : DO READ CAREFULLY

    • Clean flash needed !!!
    • NO need to flash FW
    • Join also our new TG crDroid MI9
    • When having issues to setup FP check HERE
    • When wanting to boot WITHOUT GAPPS : go into TWRP and remove 2 Hotwordenrollment apk's under system/product/priv-app

    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Xiaomi MI9 (cepheus)
    Device maintainer: raystef66
    Required firmware: build-in MIUI China Beta 21.3.10 FW


    INSTALLATION : CLEAN !! SO DO BACKUP ALL IN CASE WHEN NEED TO RESTORE

    1. wipe system, vendor, data, dalvik/chache
    2. format data, reboot twrp
    3. flash crDroid 7.4
    4. flash Gapps ( I'm using NikGapps Basic with build-in YT vanced - when other version chosen use CORE version - all up to you)
    5. flash magisk 22.0 (optional), DFE (optional)
    6. boot & ENJOY
    ====================
    02-04-2021
    ====================

    * trees rebased on Evasi0nXiao (TG) --> huge thnx @Fr1endsh1p !!!
    * SELinux Enforcing
    * WFD working
    * SafetyNet pass
    * added smart charging
    * working DC Dimming
    * LiveDisplay
    * OK Google (install assistant+Google)
    * Kernel upstreamed to 4.14.225
    * synced with latest sources
    * updated translations
    * some other fixes and improvements

    Kernel source :

    BUG LIST :


    * ANX not fully working
    * charging led not working
    4
    There is only one version for Android 11. It's v185R + 48MPFixR v201.
    3
    Does this rom have the smartbar navbar I'm using it on another rom if not could you add it
    Does this rom have the smartbar navbar if not could you add it
    Does this rom have the latest smartbar built in ?
    Does this rom have the latest version of the smartbar

    @musicman5844, as per the Forum Rules:

    5. Create a thread topic or post a message only once, this includes external links & streaming media.

    As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
    • You can bump your unanswered question once every 24 hours
    • Duplicate threads and posts will be removed

    I've gone ahead and removed your duplicate posts. Kindly consider this a friendly reminder to not spam the thread with repeated questions and wait for someone to respond. This goes for the other threads you've posted the question in too, repeatedly. Further rule violations or spamming may attract more serious consequences.

    Regards,
    shadowstep
    Forum Moderator
  • 25
    :cowboy: FLASHING TIME :cowboy:
    NEW crDroid BUILD 12.01.2021

    DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

    crDroid statistics :cool:


    SELINUX PERMISSIVE


    crDroidAndroid-11.0-20210112-cepheus-v7.2.zip


    NOTE :

    • DO flash new fw V12.0.3.0.QFAEUXM
    • Clean or dirty flash possible
    • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
    • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
    • When clean flash, just follow steps below or read OP
    • Join also our new TG crDroid MI9
    • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP !

    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Xiaomi MI9 (cepheus)
    Device maintainer: raystef66
    Required firmware: V12.0.3.0.QFAEUXM


    INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

    1. wipe system, data, dalvik/chache
    2. format data, reboot twrp
    3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.3.0.QFAEUXM
    4. flash crDroid 7.2, reboot twrp
    5. flash modded magisk or magisk 21.2, DFE
    6. flash Nikgapps Basic
    7. boot & ENJOY
    ====================
    12-01-2021
    ====================

    * updated DRM/WIDEVINE blobs
    * fixed issues on Netflix, Chrome...
    25
    :cowboy: FLASHING TIME :cowboy:
    NEW crDroid BUILD 14.04.2021

    DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

    crDroid statistics :cool:


    SELINUX ENFORCING


    crDroidAndroid-11.0-20210414-cepheus-v7.5.zip


    NOTE : DO READ CAREFULLY

    • NO need to flash FW
    • Join also our new TG crDroid MI9
    • When having issues to setup FP check HERE
    • When wanting to boot WITHOUT GAPPS : go into TWRP and remove 2 Hotwordenrollment apk's under system/product/priv-app
    • When having WIFI issues : WIFI FIX

    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Xiaomi MI9 (cepheus)
    Device maintainer: raystef66
    Required firmware: build-in

    INSTALLATION : DIRTY (coming from latest cr7.4 !!)

    1. wipe dalvik/chache
    2. flash crDroid 7.5
    3. reboot twrp
    4. flash Gapps when having boot issue
    5. flash magisk 22.0 (optional), DFE (optional)
    6. boot & ENJOY


    INSTALLATION : CLEAN !! SO DO BACKUP ALL IN CASE WHEN NEED TO RESTORE

    1. wipe system, vendor, data, dalvik/chache
    2. format data, reboot twrp
    3. flash crDroid 7.5
    4. flash Gapps ( I'm using NikGapps Basic with build-in YT vanced - when other version chosen use CORE version - all up to you)
    5. flash magisk 22.0 (optional), DFE (optional)
    6. boot & ENJOY
    ====================
    14-04-2021
    ====================

    * updated to crDroid 7.5 code
    * updated to sec. patch level 2021.04.05
    * updated vendor from 21.4.7
    * vendor sec. patch level 2021.04.01
    * kernel upstreamed to 4.14.230
    * add tile to show power menu
    * added OxygenOS lockscreen clock
    * added long screenshot (test)
    * fixed charging led
    * synced with latest sources
    * updated translations
    * some other fixes and improvements

    BUG LIST :

    * ANX not fully working
    * FPS not showing up

    thnx @Fr1endsh1p
    thnx @roxdragon for your donation!
    21
    :cowboy: FLASHING TIME :cowboy:
    NEW crDroid BUILD 11.03.2021

    DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

    crDroid statistics :cool:


    SELINUX PERMISSIVE


    crDroidAndroid-11.0-20210311-cepheus-v7.4.zip


    NOTE :

    • DO flash new fw V12.0.4.0.QFAEUXM
    • Clean or dirty flash possible
    • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
    • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
    • When clean flash, just follow steps below or read OP
    • Join also our new TG crDroid MI9
    • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP/STUCK ON crDroid LOGO !! (maybe also re-install some apps that force close)

    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Xiaomi MI9 (cepheus)
    Device maintainer: raystef66
    Required firmware: V12.0.4.0.QFAEUXM !!


    INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

    1. wipe system, data, dalvik/chache
    2. format data, reboot twrp
    3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.4.0.QFAEUXM !!
    4. flash crDroid 7.4, reboot twrp
    5. flash magisk 21.4 (22.0), DFE
    6. flash Nikgapps Basic (reflash if stuck on boot)
    7. boot & ENJOY
    ====================
    11-03-2021
    ====================

    * updated to crDroid 7.4 code
    * updated to sec. patch level 2021.03.05
    * updated to march Coral fingerprint
    * added theme settings dashboard icons
    * moved charging sound settings to crDroid Settings
    * added toggle to play a sound when battery fully charged
    * added toggle to vibrate when fully charged
    * added switch styles (crDroidSettings -> UI)
    * added 404 IDE Clock (Settings -> Display -> Style and Wallpaper -> Clock)
    * changed to seekbar option for font size and icon size options on Launcher
    * fixed partial screenshot option* synced with latest sources
    * updated translations
    * some other fixes and improvements

    Thxn @soman123 for your donation - appreciated !
    21
    :cowboy: FLASHING TIME :cowboy:
    NEW crDroid BUILD 09.01.2021

    DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

    crDroid statistics :cool:


    SELINUX PERMISSIVE


    crDroidAndroid-11.0-20210109-cepheus-v7.2.zip


    NOTE :

    • DO flash new fw V12.0.3.0.QFAEUXM
    • Clean or dirty flash possible
    • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
    • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
    • When clean flash, just follow steps below or read OP
    • Join also our new TG crDroid MI9
    • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP !

    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Xiaomi MI9 (cepheus)
    Device maintainer: raystef66
    Required firmware: V12.0.3.0.QFAEUXM


    INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

    1. wipe system, data, dalvik/chache
    2. format data, reboot twrp
    3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.3.0.QFAEUXM
    4. flash crDroid 7.2, reboot twrp
    5. flash modded magisk or magisk 21.2, DFE
    6. flash Nikgapps Basic
    7. boot & ENJOY
    ====================
    09-01-2021
    ====================

    * updated to crDroid 7.2 code
    * updated to sec. patch level 2021.01.05
    * moved to Coral januari fingerprint
    * fixed wallpaper tap to change
    * added dt2s
    * added ambient display features
    * relit QTI BT stack
    * iorap enabled by default
    * fixed old style mobile data indicators
    * 4.14.213 Quantic-illusion
    * added allow to hide arrow on back gesture
    * added custom length of gesture navbar
    * added hide gesture navbar option
    * added FOD customization options
    * added FOD icon picker
    * added FOD with screen off
    * added FOD animation toggle and styles
    * added FOD icon color option
    * added a toast message to alert slider switch
    * added battery estimate on QS
    * added blur option toggle switch (Settings -> Display)
    * added lock screen clock styles
    * made power-off alarm working again
    * synced with latest sources
    * updated translations
    * some other fixes and improvements
    21
    :cowboy: FLASHING TIME :cowboy:
    NEW crDroid BUILD 12.02.2021

    DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

    crDroid statistics :cool:


    SELINUX PERMISSIVE


    crDroidAndroid-11.0-20210212-cepheus-v7.3.zip


    NOTE :

    • DO flash new fw V12.0.4.0.QFAEUXM
    • Clean or dirty flash possible
    • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
    • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
    • When clean flash, just follow steps below or read OP
    • Join also our new TG crDroid MI9
    • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP/STUCK ON crDroid LOGO !
    • IMPORTANT : due to changes on sources it may happen that some icon apps on homescreen are rearranged

    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Xiaomi MI9 (cepheus)
    Device maintainer: raystef66
    Required firmware: V12.0.4.0.QFAEUXM !!


    INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

    1. wipe system, data, dalvik/chache
    2. format data, reboot twrp
    3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.4.0.QFAEUXM !!
    4. flash crDroid 7.2, reboot twrp
    5. flash modded magisk (clean flash) or magisk 21.4, DFE
    6. flash Nikgapps Basic
    7. boot & ENJOY
    ====================
    12-02-2021
    ====================

    * updated to crDroid 7.3 code
    * updated to sec. patch level 2021.02.05
    * updated to februari Coral fingerprint
    * added option to record screen in lower quality
    * added ability to set different ringtone for multi-sim
    * added QS tile styles
    * added string for Deep Sleep percentage
    * added AOD when charging toggle
    * added Ambient Display pulse visualizer
    * added QS footer icon visibility toggles
    * added edge lighting for ambient pulse notification toggle
    * added toggle to suppress notification sound when screen on
    * addressed 0.8 font scaling bug
    * synced with latest sources
    * updated translations
    * some other fixes and improvements
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone