[ROM][11.0][OFFICIAL][CEPHEUS] crDroid v7.7 [17.06.2021]

Search This thread

Lu41fer

Member
Mar 29, 2021
10
2
I downloaded GCam_7.3.018_Urnyx05-v2.5.apk but I don't have 48MP,
It's take image on 12MP for both 12MP and 48MP.
Any suggestion?
not possible to unlock 48
Screenshot_20210516-054632075 (1).jpg

magisk module only supports android 10

it seems to work on another firmware pixel experince 11 https://download.pixelexperience.org/cepheus
Screenshot_20210516-055654354 (1).jpg
 
Last edited:

neroes

Senior Member
Jul 11, 2013
54
12
Braunschweig
www.soundcloud.de
Yes,
ANX camera is working with 48MP support.



voila... here is the Patch :


Fully Anx on Mi9 !
 
  • Like
Reactions: aem_kei

aem_kei

Member
Oct 16, 2012
19
8
OnePlus 3
Xiaomi Mi 9
WIFI CONNECTION ISSUE

For those who seem to be having issues on connecting to wifi, their data/vendor/mac_addr seems to be empty where it should be like as the picture below.
To fix just flash this zip. It flashes the wlan_mac.bin to vendor/firmware/wlan/qca_cld
I have problems with Wifi. Connection is allready OK, but no Internet connection. No Problems on other devices with the same Wifi.
 

Attachments

  • Screenshot_20210524-194154311.jpg
    Screenshot_20210524-194154311.jpg
    95.4 KB · Views: 41
  • Screenshot_20210524-193730153 (1).jpg
    Screenshot_20210524-193730153 (1).jpg
    119.4 KB · Views: 41
Last edited:

d7th

Member
May 27, 2021
5
0
Ask your question here, someone will come to your aid. 😉
1. noticed that at night the smart loses ~25% of the charge, in the forum noticed that some have a similar problem, they recommended to turn off the "detection in the pocket", I tried it and it worked! now the charge at night consumes 4-8%.
2. When explicitly enabled in the "USB operation mode" setting in "file transfer" - sometimes, when connected to the charging adapter, the smart does not charge, and there is no notification of the charging process, as if not connected to the adapter, but charging goes, slow, as if from a USB PC, and when from the curtain change to "no data transfer", jerk smart, then it charges in "fast charging" mode.
00. maybe this is not the right place, the moment with the battery, there is a file in the path "/sys/class/power_supply/bms/charge_full" , in this file replace the numbers with 3175000, then android sees the battery as 3175mah, and not as ~2400mah.
crDroid 7.6, my clean firmware date is 20.05.21
 
Jan 1, 2011
8
1
I have problems with Wifi. Connection is allready OK, but no Internet connection. No Problems on other devices with the same Wifi.
Same here. I think it is related to 5GHz wifi. I'm using my fritzbox mesh in dualband configuration (with 2,4 and 5 GHz together) and usually the problem occurs if the phone trys to connect to the 5ghz band. Haven't noticed if I'm at greater distance and phone wants to connect to the 2,4 ghz band.
I already tried different channels for both bands, but it's still the same. I think the wifi issues starter with crdroid 7.5 or 7.4.
I didn't noticed this behavior then I started using crdroid 7.2
 

fredelec19

Senior Member
  • Dec 23, 2016
    110
    10
    :cowboy: FLASHING TIME :cowboy:
    NEW crDroid BUILD 09.05.2021

    DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

    crDroid statistics :cool:


    SELINUX ENFORCING


    crDroidAndroid-11.0-202100509-cepheus-v7.6.zip


    NOTE : DO READ CAREFULLY

    • NO need to flash FW
    • Join also our new TG crDroid MI9
    • When having issues to setup FP check HERE
    • When wanting to boot WITHOUT GAPPS : go into TWRP and remove 2 Hotwordenrollment apk's under system/product/priv-app
    • When having WIFI issues : WIFI FIX

    Highlights & Device Specific Changes:
    Build type: Monthly
    Device: Xiaomi MI9 (cepheus)
    Device maintainer: raystef66
    Required firmware: build-in

    INSTALLATION : DIRTY (coming from latest cr7.4 !!)

    1. wipe dalvik/chache
    2. flash crDroid 7.6
    3. reboot twrp
    4. flash Gapps when having boot issue
    5. flash magisk 22.0 (optional), DFE (optional)
    6. boot & ENJOY


    INSTALLATION : CLEAN !! SO DO BACKUP ALL IN CASE WHEN NEED TO RESTORE

    1. wipe system, vendor, data, dalvik/chache
    2. format data, reboot twrp
    3. flash crDroid 7.6
    4. flash Gapps ( I'm using NikGapps Basic with build-in YT vanced - when other version chosen use CORE version - all up to you)
    5. flash magisk 22.0 (optional), DFE (optional)
    6. boot & ENJOY
    ====================
    09-05-2021
    ====================

    * updated to crDroid 7.6 code
    * updated to sec. patch level 2021.05.05
    * kernel upstreamed to 4.14.232
    * added notification / media ticker customization
    * added "Force Close" button toggle for notification longpress
    * added lockscreen background blur
    * added toast notification toggle for apps accessing clipboard
    * added Updates channel link
    * added switch to select SBC HD by default in DevOptions
    * added Notifications background opacity control
    * added "wireless" charging animation on lockscreen even for wired charging
    * updated and tweaked long screenshot
    * added option to use primary system color for QS tile icon
    * added screenshot quality setting
    * reworked screenshots menu
    * synced with latest sources
    * updated translations
    * some other fixes and improvements

    BUG LIST :

    * ANX not fully working
    * FPS not showing up

    thnx @jmk2001 for the generous donation ! Appreciated ;)
    7.6 works with V12.0.5.0.QFAEUXM?
     

    d7th

    Member
    May 27, 2021
    5
    0
    Ask your question here, someone will come to your aid. 😉
    correction to point 2. it turns out that it does not matter how "USB operation mode" is set, charging does not happen at any setting of "USB operation mode", and for charging to happen, you need to reboot the smartphone
     

    d7th

    Member
    May 27, 2021
    5
    0
    fredelec19
    studied the group "crdroid mi9" in Telegram, there people are massively complaining about charging, it seems to be a massive bug
    PS: If anything, I changed the cable and charger to another, it did not help, even when the smartphone is off, it does not charge there
     

    toscha42

    Senior Member
    Nov 13, 2011
    743
    339
    Bangkok / Munich
    Can't confirm. Charging a Mi 9 running crDroid 7.6 works seamlessly. At least with:

    - Original Xiaomi charger -> Fast charging.
    - An old Samsung charger -> Slow charging, to be expected since the charger is not capable of fast charging at all.
    - QI charger in car -> Slow charging, to be expected since the car's charging device doesn't support fast charging.

    Btw, I've set 'USB Operation Mode' to 'File transfer' and that doesn't affect charging at all.


    Cheers
    Toscha
     

    elchico92

    Member
    Jan 18, 2018
    22
    4
    Hi all,

    my phone is on 7.6 crDroid.
    It randomly freezes and reboots once or twice a day, which is annoying. For a couple of days now, it reboots at some time during the night, every night, which is why my alarm does not wake me up in the morning. This is really bad.

    Does anybody have a workaround or a guess, why it behaves like that? I would really need this, without an alarm I am lost.
    Thanks in advance.

    EDIT: I noticed that this bug was already stated. However, I hope that someone still has a workaround?
     
    • Like
    Reactions: Lu41fer and pavoleo

    Top Liked Posts

    • 1
      @raystef66

      After restoring Widevine L1 with xiaomi.eu rom and flashing crDroid I have L3. I guess it should be fixed like in last update of PixelExpierience.

      From 12.0.5.0.QFAEUXM, I did "wipe system, vendor, data, dalvik/cache, format data, reboot twrp, flashed crdroid" per OP instructions, and I have Widevine L1 in crDroid

      Hello everybody!

      With the use I give this ROM I have no problem. Just one question, why don't the apps appear in the Screen > Applications in Full Screen section? Only MatLog appears. I wish there was a way for it to work, it is useful in some cases not to avoid the notch and take advantage of the entire screen.
      Greetings and thank you very much for your work, dev!

      That troubled me also.

      Settings-> crDroid Settings -> Navigation -> Stock Navbar Settings -> System navigation -> Gesture Navigation -> Gears Icon

      Move "Gesture bar length" all way to the left (Hidden)
    • 14
      :cowboy: FLASHING TIME :cowboy:
      NEW crDroid BUILD 17.06.2021

      DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

      crDroid statistics :cool:


      SELINUX ENFORCING


      crDroidAndroid-11.0-20210617-cepheus-v7.7.zip


      NOTE : DO READ CAREFULLY

      • NO need to flash FW
      • Join also our new TG crDroid MI9
      • When having issues to setup FP check HERE
      • When wanting to boot WITHOUT GAPPS : go into TWRP and remove 2 Hotwordenrollment apk's under system/product/priv-app
      • When having WIFI issues : WIFI FIX

      Highlights & Device Specific Changes:
      Build type: Monthly
      Device: Xiaomi MI9 (cepheus)
      Device maintainer: raystef66
      Required firmware: build-in

      INSTALLATION : DIRTY (coming from latest cr7.6 !!)

      1. wipe dalvik/chache
      2. flash crDroid 7.7
      3. reboot twrp
      4. flash Gapps when having boot issue
      5. flash magisk 23.0 (optional), DFE (optional)
      6. boot & ENJOY


      INSTALLATION : CLEAN !! SO DO BACKUP ALL IN CASE WHEN NEED TO RESTORE

      1. wipe system, vendor, data, dalvik/chache
      2. format data, reboot twrp
      3. flash crDroid 7.7
      4. flash Gapps ( I'm using NikGapps Basic with build-in YT vanced - when other version chosen use CORE version - all up to you)
      5. flash magisk 23.0 (optional), DFE (optional)
      6. boot & ENJOY
      ====================
      16-06-2021
      ====================

      * updated to crDroid 7.7 code
      * updated to sec. patch level 2021.06.05
      * kernel upstreamed to 4.14.235
      * update to Redfin june fp
      * add support for doze auto brightness
      * nuke unused power off alarm blobs
      * enable burn-in protection
      * reset stock audio configs
      * updated power menu customizations based on LOS
      * added power menu background opacity customization
      * fixed screenshot direct send link
      * added volume panel styles
      * synced with latest sources
      * updated translations
      * some other fixes and improvements


      BUG LIST :

      * ANX not fully working
      * FPS not showing up
      2
      Hi all,

      my phone is on 7.6 crDroid.
      It randomly freezes and reboots once or twice a day, which is annoying. For a couple of days now, it reboots at some time during the night, every night, which is why my alarm does not wake me up in the morning. This is really bad.

      Does anybody have a workaround or a guess, why it behaves like that? I would really need this, without an alarm I am lost.
      Thanks in advance.

      EDIT: I noticed that this bug was already stated. However, I hope that someone still has a workaround?
      2
      Just installed crDroid 7.7. Some feedback:
      - I needed to flash NikGapps after the ROM due to bootloop. Not too surprising as it was the same with previous versions and had been mentioned in XDA thread as well.
      - I needed to flash WiFi fix. Not too surprising as it was the same with previous versions.
      - SafetyNet is passed as before.
      - Widevine level is still L1, as it was before.

      In a nutshell, everything's working fine so far, no unexpected issues to be seen.

      Thanks for the great work, @raystef66!

      Cheers
      Toscha
      1
      Next Issue: Phone reboots over night and alarm clock did not Ring.
      1
      Next Issue: Phone reboots over night and alarm clock did not Ring.
      changing the ringtone here it works for me
    • 28
      :cowboy: FLASHING TIME :cowboy:
      NEW crDroid BUILD 14.04.2021

      DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

      crDroid statistics :cool:


      SELINUX ENFORCING


      crDroidAndroid-11.0-20210414-cepheus-v7.5.zip


      NOTE : DO READ CAREFULLY

      • NO need to flash FW
      • Join also our new TG crDroid MI9
      • When having issues to setup FP check HERE
      • When wanting to boot WITHOUT GAPPS : go into TWRP and remove 2 Hotwordenrollment apk's under system/product/priv-app
      • When having WIFI issues : WIFI FIX

      Highlights & Device Specific Changes:
      Build type: Monthly
      Device: Xiaomi MI9 (cepheus)
      Device maintainer: raystef66
      Required firmware: build-in

      INSTALLATION : DIRTY (coming from latest cr7.4 !!)

      1. wipe dalvik/chache
      2. flash crDroid 7.5
      3. reboot twrp
      4. flash Gapps when having boot issue
      5. flash magisk 22.0 (optional), DFE (optional)
      6. boot & ENJOY


      INSTALLATION : CLEAN !! SO DO BACKUP ALL IN CASE WHEN NEED TO RESTORE

      1. wipe system, vendor, data, dalvik/chache
      2. format data, reboot twrp
      3. flash crDroid 7.5
      4. flash Gapps ( I'm using NikGapps Basic with build-in YT vanced - when other version chosen use CORE version - all up to you)
      5. flash magisk 22.0 (optional), DFE (optional)
      6. boot & ENJOY
      ====================
      14-04-2021
      ====================

      * updated to crDroid 7.5 code
      * updated to sec. patch level 2021.04.05
      * updated vendor from 21.4.7
      * vendor sec. patch level 2021.04.01
      * kernel upstreamed to 4.14.230
      * add tile to show power menu
      * added OxygenOS lockscreen clock
      * added long screenshot (test)
      * fixed charging led
      * synced with latest sources
      * updated translations
      * some other fixes and improvements

      BUG LIST :

      * ANX not fully working
      * FPS not showing up

      thnx @Fr1endsh1p
      thnx @roxdragon for your donation!
      25
      :cowboy: FLASHING TIME :cowboy:
      NEW crDroid BUILD 12.01.2021

      DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

      crDroid statistics :cool:


      SELINUX PERMISSIVE


      crDroidAndroid-11.0-20210112-cepheus-v7.2.zip


      NOTE :

      • DO flash new fw V12.0.3.0.QFAEUXM
      • Clean or dirty flash possible
      • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
      • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
      • When clean flash, just follow steps below or read OP
      • Join also our new TG crDroid MI9
      • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP !

      Highlights & Device Specific Changes:
      Build type: Monthly
      Device: Xiaomi MI9 (cepheus)
      Device maintainer: raystef66
      Required firmware: V12.0.3.0.QFAEUXM


      INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

      1. wipe system, data, dalvik/chache
      2. format data, reboot twrp
      3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.3.0.QFAEUXM
      4. flash crDroid 7.2, reboot twrp
      5. flash modded magisk or magisk 21.2, DFE
      6. flash Nikgapps Basic
      7. boot & ENJOY
      ====================
      12-01-2021
      ====================

      * updated DRM/WIDEVINE blobs
      * fixed issues on Netflix, Chrome...
      21
      :cowboy: FLASHING TIME :cowboy:
      NEW crDroid BUILD 11.03.2021

      DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

      crDroid statistics :cool:


      SELINUX PERMISSIVE


      crDroidAndroid-11.0-20210311-cepheus-v7.4.zip


      NOTE :

      • DO flash new fw V12.0.4.0.QFAEUXM
      • Clean or dirty flash possible
      • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
      • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
      • When clean flash, just follow steps below or read OP
      • Join also our new TG crDroid MI9
      • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP/STUCK ON crDroid LOGO !! (maybe also re-install some apps that force close)

      Highlights & Device Specific Changes:
      Build type: Monthly
      Device: Xiaomi MI9 (cepheus)
      Device maintainer: raystef66
      Required firmware: V12.0.4.0.QFAEUXM !!


      INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

      1. wipe system, data, dalvik/chache
      2. format data, reboot twrp
      3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.4.0.QFAEUXM !!
      4. flash crDroid 7.4, reboot twrp
      5. flash magisk 21.4 (22.0), DFE
      6. flash Nikgapps Basic (reflash if stuck on boot)
      7. boot & ENJOY
      ====================
      11-03-2021
      ====================

      * updated to crDroid 7.4 code
      * updated to sec. patch level 2021.03.05
      * updated to march Coral fingerprint
      * added theme settings dashboard icons
      * moved charging sound settings to crDroid Settings
      * added toggle to play a sound when battery fully charged
      * added toggle to vibrate when fully charged
      * added switch styles (crDroidSettings -> UI)
      * added 404 IDE Clock (Settings -> Display -> Style and Wallpaper -> Clock)
      * changed to seekbar option for font size and icon size options on Launcher
      * fixed partial screenshot option* synced with latest sources
      * updated translations
      * some other fixes and improvements

      Thxn @soman123 for your donation - appreciated !
      21
      :cowboy: FLASHING TIME :cowboy:
      NEW crDroid BUILD 09.01.2021

      DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

      crDroid statistics :cool:


      SELINUX PERMISSIVE


      crDroidAndroid-11.0-20210109-cepheus-v7.2.zip


      NOTE :

      • DO flash new fw V12.0.3.0.QFAEUXM
      • Clean or dirty flash possible
      • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
      • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
      • When clean flash, just follow steps below or read OP
      • Join also our new TG crDroid MI9
      • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP !

      Highlights & Device Specific Changes:
      Build type: Monthly
      Device: Xiaomi MI9 (cepheus)
      Device maintainer: raystef66
      Required firmware: V12.0.3.0.QFAEUXM


      INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

      1. wipe system, data, dalvik/chache
      2. format data, reboot twrp
      3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.3.0.QFAEUXM
      4. flash crDroid 7.2, reboot twrp
      5. flash modded magisk or magisk 21.2, DFE
      6. flash Nikgapps Basic
      7. boot & ENJOY
      ====================
      09-01-2021
      ====================

      * updated to crDroid 7.2 code
      * updated to sec. patch level 2021.01.05
      * moved to Coral januari fingerprint
      * fixed wallpaper tap to change
      * added dt2s
      * added ambient display features
      * relit QTI BT stack
      * iorap enabled by default
      * fixed old style mobile data indicators
      * 4.14.213 Quantic-illusion
      * added allow to hide arrow on back gesture
      * added custom length of gesture navbar
      * added hide gesture navbar option
      * added FOD customization options
      * added FOD icon picker
      * added FOD with screen off
      * added FOD animation toggle and styles
      * added FOD icon color option
      * added a toast message to alert slider switch
      * added battery estimate on QS
      * added blur option toggle switch (Settings -> Display)
      * added lock screen clock styles
      * made power-off alarm working again
      * synced with latest sources
      * updated translations
      * some other fixes and improvements
      21
      :cowboy: FLASHING TIME :cowboy:
      NEW crDroid BUILD 12.02.2021

      DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING ;)

      crDroid statistics :cool:


      SELINUX PERMISSIVE


      crDroidAndroid-11.0-20210212-cepheus-v7.3.zip


      NOTE :

      • DO flash new fw V12.0.4.0.QFAEUXM
      • Clean or dirty flash possible
      • For those having red border on unlock, check magisk hide ( on stable magisk ) and border will be gone ( reboot needed )
      • Dirty flash : do take back-up first, beware some/all magisk modules might not be working anymore. So re-install is necessary
      • When clean flash, just follow steps below or read OP
      • Join also our new TG crDroid MI9
      • REFLASH GAPPS AGAIN IF YOU'RE FACING BOOTLOOP/STUCK ON crDroid LOGO !
      • IMPORTANT : due to changes on sources it may happen that some icon apps on homescreen are rearranged

      Highlights & Device Specific Changes:
      Build type: Monthly
      Device: Xiaomi MI9 (cepheus)
      Device maintainer: raystef66
      Required firmware: V12.0.4.0.QFAEUXM !!


      INSTALLATION : CLEAN (DIRTY, skip step 1, 2, 3 and 6)

      1. wipe system, data, dalvik/chache
      2. format data, reboot twrp
      3. fw_cepheus_miui_CEPHEUSEEAGlobal_V12.0.4.0.QFAEUXM !!
      4. flash crDroid 7.2, reboot twrp
      5. flash modded magisk (clean flash) or magisk 21.4, DFE
      6. flash Nikgapps Basic
      7. boot & ENJOY
      ====================
      12-02-2021
      ====================

      * updated to crDroid 7.3 code
      * updated to sec. patch level 2021.02.05
      * updated to februari Coral fingerprint
      * added option to record screen in lower quality
      * added ability to set different ringtone for multi-sim
      * added QS tile styles
      * added string for Deep Sleep percentage
      * added AOD when charging toggle
      * added Ambient Display pulse visualizer
      * added QS footer icon visibility toggles
      * added edge lighting for ambient pulse notification toggle
      * added toggle to suppress notification sound when screen on
      * addressed 0.8 font scaling bug
      * synced with latest sources
      * updated translations
      * some other fixes and improvements