• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Development [ROM][11.0][OFFICIAL] crDroid Android v7.x (mojito/sunny)

Search This thread

StaryMuz

Senior Member
Dec 27, 2012
433
141
So you installed from different sources than what is listed here on the forum. Please describe better your installation procedure with download links.
 

machotom

Senior Member
Jun 10, 2013
97
14
Redmi Note 10
Download the mentioned file from anx official website and flash with twrp... But I advise to go for the gcam instead, there is a separate thread for that in the forum with the config file
 

StaryMuz

Senior Member
Dec 27, 2012
433
141
You only installed this file? It says that the file I posted should be installed as well.
 

Anish Louis

Senior Member
May 25, 2021
88
11
Redmi Note 10
(("Reboot to recovery, check if that slot became active (under reboot section)")))
My twrp showing "flashing on inactive slot B." (ends with an error 1) How can I check whether it is active or not. On reboot section its showing "Current Slot A." Down to it showing "Slot A" and "Slot B".
When i type the terminal nothing changes. Can anyone help me by explaining the process.😒
 

Anish Louis

Senior Member
May 25, 2021
88
11
Redmi Note 10

dom_93

Member
May 18, 2020
9
6
Redmi Note 10
Does anyone know how to root this rom with magisk? I have tried both by flashing magisk zip and by manually patching the rom boot image and flashing the modified image but I am alway stuck in a bootloop.
 

alonsoj636

Senior Member
Aug 30, 2020
465
160
LeEco Le 2
Redmi Note 10
flashing correct , i followed all instructions... rom booted fine but after a reboot i got a bootloop .... what is wrong here??

Edit : Flashing FlameGApps fixed bootloop

Great ROM !
 
Last edited:

Anish Louis

Senior Member
May 25, 2021
88
11
Redmi Note 10
Does anyone know how to root this rom with magisk? I have tried both by flashing magisk zip and by manually patching the rom boot image and flashing the modified image but I am alway stuck in a bootloop.
I am not a Pro in this but i can tell u how did i root my RN10.
1.FLASHED THE ROM
2.BOOT IT AND COMPLETED THE SETUPS.
3.PUT MAGISK ZIP AND MAGISK APK FILE IN INTERNAL STORAGE.
4.RESTART TO TWRP RECOVERY.
5.INSTALL >>FLASH THE MAGISK ZIP (can sideload with any recovery too)
6.REBOOT TO ROM
7. INSTAL THE APK FILE.
DONE
 
  • Like
Reactions: imtmh

dom_93

Member
May 18, 2020
9
6
Redmi Note 10
I am not a Pro in this but i can tell u how did i root my RN10.
1.FLASHED THE ROM
2.BOOT IT AND COMPLETED THE SETUPS.
3.PUT MAGISK ZIP AND MAGISK APK FILE IN INTERNAL STORAGE.
4.RESTART TO TWRP RECOVERY.
5.INSTALL >>FLASH THE MAGISK ZIP (can sideload with any recovery too)
6.REBOOT TO ROM
7. INSTAL THE APK FILE.
DONE
Tried this way and it worked with previuous build but not with the latest. When I install the apk and open it, it asks for additional configuration, automatically reboots but then it goes into bootloop.
 

StaryMuz

Senior Member
Dec 27, 2012
433
141
Cleaning partitions does not work properly in recovery yet. You will probably have to clear everything with Miui flash in MiFlash (clear all). It won't be a problem of the ROM itself.
 

Anish Louis

Senior Member
May 25, 2021
88
11
Redmi Note 10
Tried this way and it worked with previuous build but not with the latest. When I install the apk and open it, it asks for additional configuration, automatically reboots but then it goes into bootloop.
Actually i am using the latest crdroid update. Done the rooting by this method. Works well. That a/b partition thing gives me a headache.. Finally i factory formatted using twrp then sideloaded the crdroid latest zip in twrp itself. Then from twrp's terminal, I changed the inactive partition to active. (Followed the steps given by the developer in the main thread of the crdroid) Then everything works like a charm. thats all i know abt. Gud luck bro.👍
 
  • Like
Reactions: dom_93

Top Liked Posts

  • There are no posts matching your filters.
  • 7
    New Build is out :) .. Changelogs and links are updated in the thread
    2
    hello, I am planning to install this ROM on S8+ device. Have you encountered any problems?
    yes , one problem : you are in wrong forum
    1
    I just wanted to share my experience with installing this system.
    - booted TWRP
    - used ADB sideload to load crDroid - gave an error at some % but ignored it
    - formatted data in TWRP
    - booted system but it got stuck at crDroid logo
    - booted LOS recovery (included in crDroid), formatted data
    - booted system without problems
    - booted TWRP and installed OpenGapps and Magisk
    - everything works nice and smooth :)

    Big thank you and respect to devs and supporting forum members!

    My question: which GCAM version is the best for our device? I want to use all cameras and fake bokeh, is this possible? Thank you!
    1
    I've been using it since the beginning. When I had no other backup, I restored at least from Google. But now I'm on PE+. crDroid I also tested for a while and it worked. However, it does require you to try the appropriate GAPPS (including the appropriate version) when reinstalling.
    1
    Anyone got restore from google backup working? Already tried nikgapps, opengapps and mindthegapps, or is this a lost cause?
    FlameGApps have them.
  • 48
    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!

    Screenshot_20210927_033044.png


    Features
    Click for feature list


    Always Have a full functional Backup. Just in case!
    GAPPS | MICROG | Vanilla

    Useful Links:

    GCAM
    Magisk
    Orange Fox
    Logcat Reader

    Installation Order:
    > Flash / Sideload
    > Reboot to Recovery
    > Format (optional)

    [OR]

    Install it directly from fastboot if you have issues with sideloading


    CURRENT KNOWN ISSUES :
    - LegionX kernel is unsupported for now
    - will be updated when I hear from you


    Don't expect any support if you:
    - are not running the included kernel
    - have installed any crazy mods !
    - have modified system files

    Thanks to:

    - Google
    - LineageOS
    - SlimRoms
    - AOSPA (Paranoid Android)
    - OmniRom
    - NamelessROM
    - Many others... (if you're feeling upset being out of the thanks list just send a PM )


    Contributors:
    @ZIDAN44
    @TheMalachite
    @gwolfu
    @mukesh22584
    @adi153


    XDA:DevDB Information
    Source Code: https://github.com/crdroidandroid
    Kernel Source Tree: xiaomi-sdm678 / android_kernel_xiaomi_mojito
    ROM OS Version: Android 11
    Based On: LineageOS


    Version Information
    Security patch level: September 2021
    Status: Stable
    Created 2021-05-19
    Last Updated 2021-10-01


    👍SMASH THE LIKE & SHOW YOUR APPRECIATION👍
    14
    Highlights & Device Specific Changes:
    Maintainer: Prince Cooper (Discontinued)
    Build type: Monthly

    ==== 01 October, 2021 ====


    - Fixed Slow charging
    - Fixed camera color shift
    - Moved to TWRP (due to ofox kernel issues)
    - Allow all filesystems for USB-OTG
    - Don't check prox before pulsing

    ==== 27 September, 2021 ====

    - Moved to armv8-2a
    - OrangeFox Recovery preincluded
    - Added Battery Health Stats
    - Added camera cutout notch
    - Added XiaomiParts (Dirac, Clear Speaker & Thermal Profiles)
    - Added color modes
    - Updated blobs from V12.5.3.0.RKGMIXM
    - Drop ANX/MiuiCam support for now
    - Improved Haptic Feedback
    - Fixed Google Backup/Restore
    - Fixed FMRadio
    - Fixed WFD/Cast
    - Fixed LDAC & AptxHD
    - Replaced PlayStore with Aurora Store in microg variant
    - Smarter decisions on whether to use 2/5Ghz AP
    - Updated device cutout corners
    - Disabled wifi firmware logging
    - Fixed whatsapp mic delay or crashes
    - More Smooth AF

    ==== 21 August, 2021 ====

    - Fixed OKGoogle Detection
    - Fixed CPU Thermal Info
    - Fixed Document Mode
    - Added Clone Shots (miuicam)
    - Added Smart Charging
    - Added Burn-in Protection
    - Added Smart Pixels
    - Brought back TWRP

    ==== 09 August, 2021 ====

    - crDroid 7.9 upstream
    - August patch merged
    - mojito: TWRP drop due to instability
    - mojito: Bluetooth AAC codec Fixed
    - mojito: Wired headset volume buttons fixed
    - mojito: ANXCam replaced with MiuiCam port
    - mojito: Fastbootd added to Power Menu
    - mojito: DavikHeap fixed for 4gb variants
    - Revamped Dialer dark theming
    - Updated native services for better FPS (to be tested)
    - Fixed new message compose with stock Messaging app
    - Removed blur additional changes to fix blur glitches
    - Added option to disable pill (crdroid > UI)
    - Added customization for rounded corners (crdroid > UI)
    - Enabled cached app freezer
    - Various under the hood updates and misc fixes

    ==== 16 July, 2021 ====

    - crDroid 7.8 upstream
    - July security patch
    - Increased system size
    - Pre-included TWRP
    - Included ANXCam 185R
    - Fixed Cam AV sync bugs
    - Quickstep Blur fixes
    - Fix media playback issues
    - Fixed VolumeDialog animation when ringer and notification are unlinked
    - Power menu UI customizations

    ==== 08 June, 2021 ====

    - Recovery ROMs from now
    - Vanilla Variant discontinued
    - Latest Firmware Mandatory
    - Added Gboard Lite
    - Removed MiXplorer Apps
    - Less frequent camcorder audio bug

    ==== 03 June, 2021 ====

    - Home crash fixed
    - Added stock terminal, AudioFX
    - LOS Recovery resolution to native
    - VANILLA / GAPPS variants included
    - SafetyNet Pass (No fix needed)

    ==== 24 May, 2021 ====

    - Fastboot ROM.
    - Weather Provider fixed
    - Added Custom Headers
    - Video Recording Stutter fixed (can be random)
    - Samsung UI audio implemented
    - Added Gboard, Via & FMRadio (won't work until we get OSS Vendor)
    - Removed substitute apps, improved response time, much more

    ==== 20 May, 2021 ====

    - Initial Build
    - May security patch
    - Removed some stock apps
    - Added QuickPic Gallery
    7
    Highlights & Device Specific Changes:
    Maintainer: Anush Madathumkara
    Build type: Monthly


    ==== 17 November, 2021 ====

    - Based on Rebased WCSF Kernel
    - Fixed some partition related issues (Now flashable via OFRP)
    - sm6150-common: Build atrace 1.0 service hals
    - sm6150-common: rootdir: Remove enable-low-power trigger from recovery
    - sm6150-common: rootdir: Allow all filesystems for USB-OTG
    - sm6150-common: prop: Disable sf EGL image tracking
    - sm6150-common: Kill kernel cmdline console parameters
    - sm6150-common: wifi: Disable wifi packet logging
    - sm6150-common: configs: power: Remove pixel audio hints
    - sm6150-common: overlay: Disable global mode and CDMA choices
    - sm6150-common: overlay: Allow seamless Doze state transitions
    - sm6150-common: rootdir: Chown drv8846_dev & akm09970 camera nodes
    - sm6150-common: prop: Switch to Codec2 by default
    - sm6150-common: prop: Disable Codec2 input surface
    - sm6150-common: parts: Add drawable icon for AOD
    - sm6150-common: sepolicy: Address virtual AB OTA denies
    - sm6150-common: Set NUM_FRAMEBUFFER_SURFACE_BUFFERS to 3
    - sm6150-common:Kang HWUI props from stock mojito qssi-user 11 RKQ1.201022.002 V12.5.3.0.RKGMIXM release-keys
    - sm6150-common:Add 300Mhz scaling_min_freq for CPUBigClusterMinFreq and CPULittleClusterMinFreq
    - sm6150-common: BoardConfig: Drop graphics layer memory buffer
    - sm6150-common:Add HDR & WCG Flags
    - sm6150-common: Do not use phase offsets as duration.
    - sm6150-common: prop: Fix screenrecord lag
    - sm6150-common: Define [email protected] into FCM
    - mojito: Update to Redfin November FP
    - Improved Stability && performance
    - 1080p Youtube playback issue addressed (FWIP)

    ==== 27 October, 2021 ====

    - Upated WCS kernel
    - Raised reserved partitions to support for improving gapps support
    - sm6150-common: Disable partial FB excl rect
    7
    New Build is available :-

    ==== 05 October, 2021 ====

    - Initial Build based on changed partitions
    - WCSF is default kernel
    - Note: This build doesnt has prebuild TWRP . Backup your full data before flashing.


    Notes:
    • Recommended Gapps Are MindThegapps & Nikgapps Basic
    • Flash Only Via Fastboot OTA Installer (https://forum.xda-developers.com/t/tool-flash-custom-roms-through-fastboot-mojito-sunny.4300957/)
    • You Can't Flash This Rom Via Recovery
    • You Can Flash Gapps Via Twrp Or Orfp
    • Make Sure To Backup All Data Before Flashing (It Might Loose Because Of Different Partition)
    7
    turned out the issue was because of installing pico gapps. installing other gapps did not give this problem
    I'll be making GApps & vanilla variants separated from next build.
    Will also make sure you guys wouldn't have these gapps hazzle on each update...
    I'll also make sure included gapps to be as minimal as possible, unlike other roms that bundle the whole google junk into the OTA.