[ROM][11.0][OFFICIAL][Guacamoleb] Evolution X | Elle [03/04/21]

techlover96

Member
Oct 20, 2020
17
2
3
Hi @spookcity138 , I clean flashed the Evo X A11 ROM a few days, and as per your steps, I flashed Magisk after setting up the ROM, after formatting data to EXT4... while Magisk flashing doesn't lead to the "Phone is starting" stuck screen, there is another issue that I am facing - when I am doing MagiskHide to certain apps that do not work when root is detected (eg. Amazon apps), the phone gets stuck on the screen itself; if I shift to another app/go to Settings, the app doesn't load, leading to a stuck screen here as well... when I had used the Uninstaller ZIP, everything was working, but when the Magisk canary was flashed, the apps would not work

Is there a workaround to this?

@DigiGoon I would appreciate your help in this as well
 

JudgeDread11

Senior Member
Aug 17, 2014
879
496
83
Ao Nang, Krabi
Hi @spookcity138 , I clean flashed the Evo X A11 ROM a few days, and as per your steps, I flashed Magisk after setting up the ROM, after formatting data to EXT4... while Magisk flashing doesn't lead to the "Phone is starting" stuck screen, there is another issue that I am facing - when I am doing MagiskHide to certain apps that do not work when root is detected (eg. Amazon apps), the phone gets stuck on the screen itself; if I shift to another app/go to Settings, the app doesn't load, leading to a stuck screen here as well... when I had used the Uninstaller ZIP, everything was working, but when the Magisk canary was flashed, the apps would not work

Is there a workaround to this?

@DigiGoon I would appreciate your help in this as well
I had the same, but just a reboot after enabling magisk hide soved it. After that everything, including magisk hide worked perfect.
I doubt that it is rom related.
 

Guy Fredrich

Member
Jan 28, 2021
7
0
1
I'm looking forward to install this rom. I'm a little new in this area. Can someone confirm that dash charging and in display figure print works or not? if yes is that eligible for daily usage?
 

spookcity138

Senior Member
Nov 9, 2015
1,844
2,518
153
Eindhoven
Updated

Changelog

Upstreamed neutrino kernel from 4.14.212 to latest 4.14.218
Updated redfin fingerprint to Feb 2021
Update OP gallery to latest 4.0.125
Set defaultHapticFeedbackIntensity to low
Uprev soundtrigger to 2.3
Updated display,graphics blobs from OOS OB1
Few other commits related to updating display blobs
Updated wfd and drm blobs from OOS OB1 (WFD now works!)
Updated ese powermanager blobs from OOS OB1
Updated media and vpp blobs from OOS OB1
Dropped custom lights and switched to standard lights hal
Overlay: configured SQLite to operate in MEMORY mode
Updated vendor security patch level from OOS 10.0.16
Added overlay for smart pixels
Optimized dex flags for a faster boot
Set default media volume steps to 25
Few other tweaks and improvements here and there
Enjoy! (y)
 

leabmgrt

New member
Feb 5, 2021
1
0
11
Germany
Hi. I tried to install the update (5.4) on my OnePlus 7 (running Evolution X 5.3), it didn't really work. Well, it did install the update but it didn't want to boot anymore. It showed the OnePlus boot logo, then the warning about the unlocked bootloader - which is normal (at least on my device) - but then it just reboots. I wiped the cache in TWRP, that didn't help. I don't wanna lose my data on the device so I tried to downgrade, which worked by installing it via TWRP. After that, it booted again and everything works now. But because I was curious, I tried to install the 5.4 update via TWRP as well, but it doesn't want to boot. I'm back on 5.3 now. Idk what's wrong, it just reboots, but i'm happy to provide extra information if needed

Update (2021/03/04): Just tried it with Evolution X 5.5, still doesn't work, going back to 5.3 now. Probably gonna reset the device and clean flash 5.5 next weekend

Update 2: ok, not gonna go back to 5.3, something's corrupted and I can't boot now

Update 3: It took some time but after a clean flash, everything works now
 
Last edited:

spookcity138

Senior Member
Nov 9, 2015
1,844
2,518
153
Eindhoven
Hi. I tried to install the update (5.4) on my OnePlus 7 (running Evolution X 5.3), it didn't really work. Well, it did install the update but it didn't want to boot anymore. It showed the OnePlus boot logo, then the warning about the unlocked bootloader - which is normal (at least on my device) - but then it just reboots. I wiped the cache in TWRP, that didn't help. I don't wanna lose my data on the device so I tried to downgrade, which worked by installing it via TWRP. After that, it booted again and everything works now. But because I was curious, I tried to install the 5.4 update via TWRP as well, but it doesn't want to boot. I'm back on 5.3 now. Idk what's wrong, it just reboots, but i'm happy to provide extra information if needed
Yeah,you're not the first person to report this. I replied to a couple people on Telegram and I can only really say the same as I said to them. I really don't know what the issue is.
There have been some rather big changes, but as I know that most people dirty flash
updates I always test this. I dirty flashed 5.4 over 5.3 and it booted fine for me, so I really just don't know
It's confusing.
I can only apologize and say perhaps a clean flash may be required for
some (most?) Just not sure why. It tested fine for me. I always try to test to the best of my ability before I release a build.
 
  • Like
Reactions: JudgeDread11

Patrickzhong

Member
Jan 28, 2018
34
7
8
Have flashed the latest build, on my oneplus7 audio can't be played when wired headphone are plugged in, no problem with speaker though, anyway to fix that?
I did a clean flash and haven't flashed magisk yet.

Edit:
Audio plays normally on last buiild ( 2021-01-06 )
 
Last edited:

spookcity138

Senior Member
Nov 9, 2015
1,844
2,518
153
Eindhoven
Have flashed the latest build, on my oneplus7 audio can't be played when wired headphone are plugged in, no problem with speaker though, anyway to fix that?
I did a clean flash and haven't flashed magisk yet.

Edit:
Audio plays normally on last buiild ( 2021-01-06 )
Yes,there are some issues with the last release and I apologize for that. Headphones seem broken. Also it seems that any kind of video/screen recording is not working. I've looked into it some and the video recording issue is broken source side for our device,so I can only hope it gets fixed soon. Otherwise I guess at some point I will try to look into it in source. I just don't have the time right now.

I shared a build with the headphone issue (apparently) resolved in the tg group. I will share here also as I'm not sure when I'll push a build again. Some may want to just stay on 5.3 until I have the time to figure these things out and push an update.

No changes other than I dropped soundtrigger on this build. Didn't even sync sources

EDIT:
I reverted a single commit in source and it seems video/screen recording is now working as it should. I have updated the link in this post with the fix. Please flash this instead of the one in the main post until I have the time to push an update. Again,apologies for the buggy release
Evo-5.4
 
Last edited:

spookcity138

Senior Member
Nov 9, 2015
1,844
2,518
153
Eindhoven
Updated

Changelog
March security patches
Updated listen blobs from OOS OB1
Updated time blobs and scripts from OOS OB1
Upstreamed neutrino kernel from 4.14.218 to latest 4.14.222
Silenced some ims debug stuff
Fixed video/screen recording
Reverted "Uprev soundtrigger to 2.3" (Fixes headphone issues)
Enabled GL comp backpressure
Added some surfaceFlinger props
Updated doze overlays
Updated carrierconfig overlay from OB2
Switched to QTI Thermal HAL
WifiOverlay: updated package name
ueventd: Don't modify permissions of /dev/hw_random
Enabled persist.rcs.supported
Reworked dex flags
Few other small things here and there
Enjoy! (y)