[ROM][11.0][Official][hotdogb] StatiXOS 4.0

Search This thread

Verm111on

Member
Mar 30, 2021
7
0
Similar stuff happened to me. (And same issue in Los; if I clicked do it anyway on the "downgrade", it'd simply end in an unbootable system)

If you find my post(s) a page or two back I tried to list what I had to do to get this rom working. The main key to my problem was a fastboot d driver that I had to update in a certain manual way, but you can look at my process and see if you find a tip.

That's all I've got.

Good luck mate, I hope you get it running, it's a great ROM with ota updates working like a charm.

PS: I still have a hunch it's a fastbootd issue with driver/command since your problems sound very similar to mine..
I manually installed Los recovery and then used reboot to fastboot to get into fastbootd mode to both install the spesific driver In Windows and to be able to run the update command. When I did it this way everything worked. (And I had probably 10 restores with MSM tool)
PPS: if you restore with MSM tool between your tries, remember that it locks the bootloader so you have to unlock it again before doing all this.

If you want to prove me right/wrong, try the payload install method and if you fail that it's guaranteed a driver/command issue around fastbootd

Edit:
Just to list my prosess:

1.Use MSM tool to version .15
2.Ota update to .16
3.Use mauriofrio's tool to unlock bootloader
4.Manually install Los recovery.
5.Boot to recovery (Los) and reboot to fastboot
Make sure you're now in fastboot d
6.Install the driver in Windows device manager, pointing to the updated Google Fastbootd package
7.Run the updater command in CMD (yay, should finally work 👍)
8.(if stuck in boot) hard reboot device.
9.(after boot) used mauriofrio's tool to root, then updated magisk
10.WIN
I can't seem to find an boot img for OOS 10.0.15, would going from .13 work?
 

Eddiemc

Senior Member
Mar 15, 2010
1,416
540
For those interested, I just installed Nemo kernel 113 using Franco kernel manager. Everything seems golden so far. Mtp works fine! When it's settled I'll report back if there's a battery gain.

Edit. Better battery (and mtp works fine) but for some reason it breaks fingerprint recognition on my device. I've tried both 113 and 115 without luck, so now I'm back on stock (Los).
Hopefully OP will bake something nice into the ROM now that sources is out and seems to be working fine..
 
Last edited:

Eddiemc

Senior Member
Mar 15, 2010
1,416
540
Anybody running a custom kernel on this one with good results?

Not to get into a discussion unrelated to this rom, I'm simply looking for advice if anybody has a custom one running that's fully functional (with both mtp and fingerprint working..)

Neutrino development seems a bit stagnated ATM and for some reason I cannot get Nemo to work without breaking fingerprint..
 

HueyT

Senior Member
Apr 3, 2014
3,902
1,868
New Albany, IN
OnePlus 7T
Anybody running a custom kernel on this one with good results?

Not to get into a discussion unrelated to this rom, I'm simply looking for advice if anybody has a custom one running that's fully functional (with both mtp and fingerprint working..)

Neutrino development seems a bit stagnated ATM and for some reason I cannot get Nemo to work without breaking fingerprint..
Nemo labs v115 is faaast
 

HueyT

Senior Member
Apr 3, 2014
3,902
1,868
New Albany, IN
OnePlus 7T
can i ask how you go back to oos (to the global rom)? Id like to update my firmware in the future... I have the tmb one too
Oxygen updater app from playstore can let u download zip for stock A11.0.0.2. Then flash zip in twrp on current slot, change slot using twrp, flash same zip again on other slot, format data using twrp as ext4 data, reboot
 
  • Like
Reactions: Alejndrox097

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Yea and I got very good battery too with half the idle drainage, yet somehow fingerprint broke every time I flashed it.. fastbootd stock boot image and fingerprint works again.

    Are you on t7 1903?
    Op7t hd1907 tmobile converted to global
    1
    can i ask how you go back to oos (to the global rom)? Id like to update my firmware in the future... I have the tmb one too
    Oxygen updater app from playstore can let u download zip for stock A11.0.0.2. Then flash zip in twrp on current slot, change slot using twrp, flash same zip again on other slot, format data using twrp as ext4 data, reboot
  • 11
    Hello everyone!
    StatiX for OnePlus7T is finally back!

    We're really sorry if we didn't release anything since November, but I've been busy and I didn't feel like sharing builds that, even if stable, weren't able to meet our quality standards; but now everything's been sorted and there are really good news: hotdogb is ready to be called Official Device and we have a build server, kindly sponsored by DataPacket; the CI is managed by Buildkite and the pipelines can be monitored from here. We'll release bi-weekly builds (two times a month) which can be downloaded from our SourceForge folder.

    Now, with that said, we've committed so many changes to our ROM source that I can't list them all here, what can I do is listing the mayor device-specific improvements:
    • Fixed the USB issue which lead to crashdump mode whenever MTP was enabled or the device was connected to Android Auto.
    • Implemented support for f2fs file system. Check the spoiler at the end of this post to have more info.
    • Added Display Modes, Screen-off gestures and vibration control to DeviceSettings.
    • Improved FOD experience. No more flickers whatsoever. Reliability and speed are practically on pair with OxygenOS. Note: if you encounter issues be sure to flash the global variant of OOS and then flash StatiX.
    • Updated some critical blobs to OOS 11 OB1 and latest CAF tag, I'm working on updating all of them to the latest OOS or CAF release.
    • Added custom rounded corners, they finally are smooth and not aliased.

    I've added a new method to flash this ROM to the second post: LOS Recovery. In my opinion it's the easiest and most reliable way to install StatiX: the installation process really boils down to flashing the recovery image and sideloading the ROM zip. And frankly on this device LOS recovery has as many (if not even more) features as our TWRP.

    DOWNLOAD

    • Flash StatiX the way you like best (fastbootd, TWRP, LOS Recovery)
    • Format the data partition to f2fs through a custom recovery (TWRP or LOS)
    • Boot
    10

    stx-2020.png

    StatiXOS for OnePlus 7T (hotdogb)

    About us
    StatiXOS is a custom ROM based on the Android Open Source Project aiming to be minimal while providing quality of life improvements and up to date security patches.

    Source code

    Features

    Download StatiXOS here

    GApps are included!

    Stay in touch

    Our Telegram channel


    ROM OS Version: 11.0
    ROM Firmware Required: OOS 10.0.16 (Global Version)
    6
    Hello everyone!

    A new build is available and it brings a bunch of great news.

    DOWNLOAD

    News:
    • March security patches have been merged
    • We've implemented a new updater: we now have OTAs, from now on you'll just need to press one button and it will do everything by itself (I've modified the "update" instructions in the second post, check it to gather more info)
    • Custom Icon Pack support
    • Added Sfuny clock
    • BLUR!
    • We now have a download server, SourceForge will be kept as a backup/mirror solution
    5
    February ASB has been merged!

    You can download the update from here:
    DOWNLOAD

    Remember to follow the steps from the 2nd post to update your device.

    Cheers!
    4
    You're free to flash StatiXOS with Lineage Recovery, TWRP or fastbootd

    Clean Flash
    The last OOS you flashed to your phone (doesn't necessarily need to be the flashed right before StatiX) needs to be the latest stable global variant, you can get it here.

    • Download the ROM from here (or our mirror server)
    • Reboot to bootloader
    • Flash StatiX by executing
      Code:
      fastboot update <statix_hotodgb-...-.zip>
      (Replace the text between the "<>" with the actual zip name and remove the "<>")

    • Download the recovery from here (or our mirror server)
    • Flash LOS recovery by executing
      Code:
      fastboot flash recovery <recovery-hotdogb-...-.img>
      (Replace the text between the <> with the actual zip name)
    • Reboot into recovery mode
    • Format your data to f2fs
    • Go back to the main menu and tap Apply Update
    • Tap Apply from ADB
    • Sideload the ROM by executing
      Code:
      adb sideload <statix_hotodgb-...-OFFICIAL.zip>
      (Replace the text between the <> with the actual zip name)
    • Reboot
    You'll find more info in this section of LineageOS Wiki

    • Reboot to bootloader (!= fastbootd)
    • Connect your device to a computer and execute:
      Code:
      fastboot -w
      Note: This will format your data, which means that a backup is advised
    • Reboot to recovery
    • Flash the ROM zipfile
    • Reboot to bootloader once again and execute
      Code:
      fastboot -w
    • Reboot to system

    • Dump the ROM zipfile through payload_dumper
    • Reboot to bootloader (!= fastbootd)
    • Connect your device to a computer and execute:
      Code:
      fastboot -w
      Note: This will format your data, which means that a backup is advised
    • Now reboot to fastbootd executing:
      Code:
      fastboot reboot fastboot
    • Flash each partition (be sure to open the terminal window in the folder you extracted the payload):
      Code:
      fastboot flash boot boot.img
      fastboot flash dtbo dtbo.img
      fastboot flash odm odm.img
      fastboot flash product product.img
      fastboot flash system system.img
      fastboot flash vbmeta vbmeta.img
      fastboot flash vbmeta_system vbmeta_system.img
      fastboot flash vendor vendor.img
    • Reboot to system

    You can install Magisk by patching the boot image (which can be found here, download the one with the same date as the build you've flashed) or flashing its zip (Version 21.0+) once you've booted for the first time.

    Update
    • Go into Settings > System > Updater
    • Check for Update
    • Once it's finished updating press "REBOOT"
    Note: Remember to flash whatever add-on you need (eg. Magisk) before rebooting to the other slot

    • Disable thedevice PIN/Passcode
    • Reboot to recovery
    • Flash the ROM zipfile
    • If you want to flash further zips (e.g. Magisk) reboot to recovery to switch slots
    • Reboot to system
    • Add back your PIN/Passcode

    • Dump the ROM zipfile through payload_dumper
    • Reboot to bootloader (!= fastbootd)
    • Now reboot to fastbootd executing:
      Code:
      fastboot reboot fastboot
    • Flash each partition (be sure to open the terminal window in the folder you extracted the payload):
      Code:
      fastboot flash boot boot.img
      fastboot flash dtbo dtbo.img
      fastboot flash odm odm.img
      fastboot flash product product.img
      fastboot flash system system.img
      fastboot flash vbmeta vbmeta.img
      fastboot flash vbmeta_system vbmeta_system.img
      fastboot flash vendor vendor.img
    • Reboot to system
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone