• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][11.0][OnePlus 3/3T] Pixel Experience [Plus Edition][21/09/2021]

Search This thread

fredengels

Member
Oct 29, 2011
39
5
OnePlus 3
OnePlus 3T
I was running the PE+ (202110729) from the time it was issued OK without the black screen.
But have not used it for now over a week as I have been hospitalised without access to my op3. It may be another week or so before I can get back into running it.
My only concern was the encryption attempt resulting in a darkened G logo loop.
In your case, perhaps a completely reformat then reflash?(obviously without encryption attempt). Always frustrating but exciting?
Back online with PE+ after 2 weeks hospitalisation. Many app updates.
So just the same as before. NO black screens.
 

coffeein

New member
Aug 30, 2021
1
0
anyone can help me? why im always get "Unknown USB Device (Device Descriptor Request Failed)" when i try to connect my device to laptop, this issue appear after i use pixel, thanks before
 

Burnzone

New member
Nov 19, 2017
4
0
Battery charging is fine but battery drain is way too quick, have to charge it 3 times in a day for 5 hours of SOT. Flashed on the oneplus 3t which has a bigger battery than the standard op3. Battery has no swelling either.

Tried installing naptime today, let's see how it goes. Used 3C toolbox as well and it shows 2797mah coming from battery file but 3400mah from battery profile. Anyone know a fix?

Other than that it's a great ROM, been enjoying my newly revived and exciting op3t again, so thanks for that. A battery issue fix would be greatly appreciated though.
 

ranjeet choudhary

Senior Member
Apr 16, 2015
88
42
Battery charging is fine but battery drain is way too quick, have to charge it 3 times in a day for 5 hours of SOT. Flashed on the oneplus 3t which has a bigger battery than the standard op3. Battery has no swelling either.

Tried installing naptime today, let's see how it goes. Used 3C toolbox as well and it shows 2797mah coming from battery file but 3400mah from battery profile. Anyone know a fix?

Other than that it's a great ROM, been enjoying my newly revived and exciting op3t again, so thanks for that. A battery issue fix would be greatly appreciated though.
Try changing CPU governor tunables, the default frequency configuration shipped with the kernel is not for 3t. For standby time turn on data saver. Turning on battery saver doesn't help
 

Burnzone

New member
Nov 19, 2017
4
0
Try changing CPU governor tunables, the default frequency configuration shipped with the kernel is not for 3t. For standby time turn on data saver. Turning on battery saver doesn't help
How do I change the turntables to be suitable for the SD821 in OP3T?
Using 3C toolbox I've found these values that can be changed but skimming online I haven't found any fixed values.
I tried changing the CPU gov to Conservative, but that felt a bit less smooth, so I tried changing it back to interactive but now it says 'operation failed'.
I also tried using accubattery but on the app when it makes the preliminary measurements it says ONEPLUS A3010 with 3000mAh available, unlike in 3C toolbox where it says 3400 in the battery profile.
So I'm wondering if the ROM is recognising my phone as a OP3 rather than a OP3T and only recognising 3000mAh from the 'kernel values'?
I'm not really into kernel development so I wouldn't know, just guessing.
Let me know if anyone knows how to configure the Frequency configuration values and how it'll affect the phone. Much appreciated.
 

Attachments

  • Screenshot_20210911-145838_3C_All-in-One_Toolbox.png
    Screenshot_20210911-145838_3C_All-in-One_Toolbox.png
    95.6 KB · Views: 31
  • Screenshot_20210911-145818_3C_All-in-One_Toolbox.png
    Screenshot_20210911-145818_3C_All-in-One_Toolbox.png
    106 KB · Views: 27
  • Screenshot_20210911-145826_3C_All-in-One_Toolbox.png
    Screenshot_20210911-145826_3C_All-in-One_Toolbox.png
    104.1 KB · Views: 28
  • Screenshot_20210911-150108_3C_All-in-One_Toolbox.png
    Screenshot_20210911-150108_3C_All-in-One_Toolbox.png
    98.6 KB · Views: 31

ranjeet choudhary

Senior Member
Apr 16, 2015
88
42
How do I change the turntables to be suitable for the SD821 in OP3T?
Using 3C toolbox I've found these values that can be changed but skimming online I haven't found any fixed values.
I tried changing the CPU gov to Conservative, but that felt a bit less smooth, so I tried changing it back to interactive but now it says 'operation failed'.
I also tried using accubattery but on the app when it makes the preliminary measurements it says ONEPLUS A3010 with 3000mAh available, unlike in 3C toolbox where it says 3400 in the battery profile.
So I'm wondering if the ROM is recognising my phone as a OP3 rather than a OP3T and only recognising 3000mAh from the 'kernel values'?
I'm not really into kernel development so I wouldn't know, just guessing.
Let me know if anyone knows how to configure the Frequency configuration values and how it'll affect the phone. Much appreciated.
Im using this for interactive governor
 

Attachments

  • Screenshot_20210911-153956.png
    Screenshot_20210911-153956.png
    100 KB · Views: 43
  • Screenshot_20210911-153956.png
    Screenshot_20210911-153956.png
    100 KB · Views: 41
  • Screenshot_20210911-153932.png
    Screenshot_20210911-153932.png
    94.1 KB · Views: 40
  • Screenshot_20210911-153921.png
    Screenshot_20210911-153921.png
    95.8 KB · Views: 44

Aamirx27

Senior Member
Feb 10, 2008
626
202
Srinagar
I recently Cracked my OP3T Display and installed a Cheap one. Only this rom is working correctly with that cheap replacement. All other Roms including Stock ROMS are having issues with this Cheap LCD's. I wonder how it works.
 

Spaqin

Senior Member
Oct 5, 2010
398
95
I recently Cracked my OP3T Display and installed a Cheap one. Only this rom is working correctly with that cheap replacement. All other Roms including Stock ROMS are having issues with this Cheap LCD's. I wonder how it works.
Hehe, I did the same, twice this year... both times ordered an OLED OEM replacement, I love these colors. Guess I dodged a bullet there, as I prefer the "other" PixelExperience by PlayFriik.

I would assume there's something in the kernel, not the ROM itself, since that's what interfaces with the screen. What are the issues you're having with other ROMs? Does it pop up before the ROM boots or in TWRP?
 

Aamirx27

Senior Member
Feb 10, 2008
626
202
Srinagar
Hehe, I did the same, twice this year... both times ordered an OLED OEM replacement, I love these colors. Guess I dodged a bullet there, as I prefer the "other" PixelExperience by PlayFriik.

I would assume there's something in the kernel, not the ROM itself, since that's what interfaces with the screen. What are the issues you're having with other ROMs? Does it pop up before the ROM boots or in TWRP?
Rom runs fine for few minutes then whenever i touch anywhere on the screen , it functions differently. I touch anywhere and notification panel comes down. Its like multiple touchs are triggered.. Or only upper touch only works
 

ankinapallih

Member
Apr 7, 2020
17
0
Rom runs fine for few minutes then whenever i touch anywhere on the screen , it functions differently. I touch anywhere and notification panel comes down. Its like multiple touchs are triggered.. Or only upper touch only works
I also replaced my oneplus 3t screen with an LCD screen, and faced same problem as you in another custom roms other than pixel experience. I guess the problem is due to multi finger gestures like 3 finger screenshot ..

And double tap to wake also doesn't work
 

Top Liked Posts