• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][11.0_r43][OFFICIAL] Evolution X 5.9.2 - Sanctuary [09/10/2021]

Search This thread

dladz

Senior Member
Aug 24, 2010
12,956
4,032
Liverpool
Huawei Watch 2
OnePlus 8
Ill
For Germany i set
LTE / WCDMA / GSM > Thats all. So no 5G connection is in use.
Only LTE / GSM i didnt found. Because WCDMA is useless in Germany..
Only LTE is not useful because of fallback when VoLte-Call not function.
I'll give that a shot, I'm only getting HSPA now, since making changes?

Hmmm..reboot I think.

Yep that's done it, thank you man.
 
  • Like
Reactions: Andyxmas

GraveDigger176

Senior Member
Oct 17, 2011
1,581
1,593
Koblenz
HTC One X
HTC One (m7)
On the latest version 👍🏿 all runs fine, but sometimes pickup to wake or tap to wake doesn't work 🤔 is it only me or have other user the same problem?
Screenshot_20210805-190157_Einstellungen.png
 

franky_z

Senior Member
May 18, 2011
756
193
Slow/Dirty EvoX Fingerprint Recognition Solution:

I almost left this ROM due to the bad/slow/dirty fingerprint reading i was experiencing that i didn't have on OOS stock. I have finally figure out why and corrected the issue by flashing a backup copy of my persist.img i had from OOS OB4 then deleting the fingerprints and then adding them back. The fingerprint recognition is super fast, and never complains now!

Method:

In ADB Shell, enter this command to backup a current copy of the Persist partition (just to be safe)
Code:
dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist_EvoX.img

Move that from your SD card to a safe storage place.

Note: If you don't have a good persist backup, flash back to STOCK OOS that the fingerprint works good with and use the method above to save a good copy of persist.

Now restore your good Persist image you made or already had from OOS 11:

While on EvolutionX ROM using fastbootd (you MUST be in fastboot D):
Code:
fastboot flash persist persist_backup.img

Just reboot after flashing, then delete your fingerprints and re-add them back.
Thanks for this! It worked!
 

Top Liked Posts