PM me.
PM me.
I'm also getting the cut-off clock and battery percentage. It looks like the navigation bar is too short.Thanks alot for the quick reply. I successfully flashed the lasest Nov 4th build. I was on Oxygen OS 11.0.1.2 KB05DA.
The ROM is great but I have 2 issues.
1. I cannot get the fingerprint to work. If I try to add a fingerprint it just lights on but does not register. I have searched the thread but seems like no one else is facing the problem. So I went back to 11.0.1.2 and download the lastest OTA (downloading now) install it then reflash Jaguar and see if it will work. I will give feedback.
2. The status bar clock is slightly cut off at the bottom (minor aesthetic proberm)
Solution that worked for me was to go to Settings-Display-Disolay cutout-Cutout style set to small (attached )I'm also getting the cut-off clock and battery percentage. It looks like the navigation bar is too short.
Solution that worked for me was to go to Settings-Display-Disolay cutout-Cutout style set to small (attached )I'm also getting the cut-off clock and battery percentage. It looks like the navigation bar is too short.
Found out, no worries
Found out !!Is there a way you can do call forwarding if you are using two SIM'S? cannot seem to find that option. Thanks
Use my recovery or unpack payload.bin and flash all imagesi cant flash using latest TWRP must you use your IMG recovery? thx
Use this recovery: HEREi got an error while trying to update:
Output at recovery:
"Instaling update....
Step 1/2
Error applying update: 7 (Error Code:: kInstallDeviceOpenError)
E:Error in /sideload/package.zip (status 1)"
Error at the PC:
"serving 'name of the image' (-47%) adb: failed to read command: No error
Recovery: I used the latest one, installed it via fastboot on both slots, without errors.
MD5 is Ok. Tryed on two different Computers. Tryed the 15.0 and the 15.1.
i'm getting the same error. was coming from carbon rom.Use this recovery: HERE
But I think you need to re-download the rom. Or you can use Lineage recovery. Or you can unpack payload bin and flash everything in fastboot.
fastboot flash recovery_a recovery.img
fastboot flash recovery_b recovery img
adb sideload 'name of the rom'
setprop sys.usb.config diag,adb