[ROM][11] DarkJoker360 AOSP 11 for Huawei P8 Lite 2017

Search This thread

piterconlai

Member
May 23, 2014
31
1
If you REALLY read, you would’ve found in my post link to the recommended TWRP.

Thanks a lot for the answer

I followed the post to the letter and installed the Praetorian TWRP

I have reached the point where I have to install the GAPPS but an error appears

I'm going to resize the file system, but only the "change file system" appears

I try to start the system but the mobile restarts immediately after the huawei logo
 

hardcorehenry

Member
Dec 2, 2020
45
19
Thanks a lot for the answer

I followed the post to the letter and installed the Praetorian TWRP

I have reached the point where I have to install the GAPPS but an error appears

I'm going to resize the file system, but only the "change file system" appears

I try to start the system but the mobile restarts immediately after the huawei logo

While trying different TWRP and wiping you may have lost internal storage(I can only guess what else might went wrong).
My advice, go back to stock and do everything and in exact order as I advised otherwise I can’t help…

P.S.See again latviandude's post how to resize system.
 
Last edited:
  • Like
Reactions: screwit20

piterconlai

Member
May 23, 2014
31
1
While trying different TWRP and wiping you may have lost internal storage(I can only guess what else might went wrong).
My advice, go back to stock and do everything and in exact order as I advised otherwise I can’t help…

P.S.See again latviandude's post how to resize system.

hello thanks again for the answer you are very kind

nothing keeps restarting after huawei logo

the only error I noticed is how much I write the file system this writing appears "invalid sparse file format at header magic" could it depend on this?

otherwise no errors

ps. i saw that post for resize but it still doesn't appear

ps. i tried to install android10 which has a similar procedure and i don't have any kind of problem
 

DarkJoker360

Recognized Developer / Recognized Contributor
Oct 20, 2015
2,575
3,517
18
Aradeo
New DarkJoker360 AOSP 11 update !

* Merged February 2021 security patches
* Fixed usb settings preference
* Added themes section (Fonts, Shapes,Accents)
* Fixed settings search bar on dark theme
* Fixed VoLTE/Wifi calling (Read 2nd post)
* Fixed some occasional random reboots while on long time deep sleep

Donations
 

Attachments

  • Screenshot_20210211-105059.png
    Screenshot_20210211-105059.png
    92.6 KB · Views: 75
  • Screenshot_20210211-105111.png
    Screenshot_20210211-105111.png
    101.7 KB · Views: 74
  • Screenshot_20210211-105128.png
    Screenshot_20210211-105128.png
    75.7 KB · Views: 69
  • Screenshot_20210211-105150.png
    Screenshot_20210211-105150.png
    59.9 KB · Views: 69
Jun 27, 2009
7
0
Hi, by the way, is it possible to update ASOP 10 with this version without reinstalling full system?
My AOSP 10 is working fine, I waiting for a full stable AOSP 11 version to migrate.
 

screwit20

Senior Member
Jun 2, 2019
156
242
Hi, by the way, is it possible to update ASOP 10 with this version without reinstalling full system?
My AOSP 10 is working fine, I waiting for a full stable AOSP 11 version to migrate.

I have never tried it.. Theoretically it should be possible but there could be more likely system conflicts like System UI crashes or something..
So if you try doing that you should make a BACKUP first of AOSP 10 and all of your DATA.
So that if you get any problems you can easily get back with your data safely.

I would recommend backing up all the stuff and flashing AOSP 11 with wiping everything before. It's your choice. In any case backup your data so you can easily recover it/get back. Good luck! :)
 

witra

New member
Feb 1, 2021
2
0
After downgrading to 8.0.0.360 (C432) it finally works. Everything works fine except USB transfer.
I installed the update but it's still the same.
Charging via USB and USB transfer from TWRP are working.
And I think, Android Auto doesn't work for the same reason...

Thank you for your great work!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    Magisk-phh v22.0 is now working !

    Only the linked version will work.

    1- Install magisk apk
    2- Go to twrp & flash MAGISKA11-a-only
    3- Flash Magisk-v22-canary-phh
    4- Reboot and enjoy

    Download

    Thanks to @Hami_Do
    5
    New AOSP 11 update

    • Synced with latest AOSP 11 source code based on r34
    • Merged April 2021 security patches
    • Fixed animations lags and janks
    • Fixed wired headphones not being detected
    • Fixed gps
    • Fixed ril crashes for dual sim devices
    • Updated APN configs from LineageOS
    • Fixed ril crashes with some carriers
    • Fixed Netflix playback
    • Adjusted screen brightness
    • Fixed minimum brightness too high
    • Enabled Wifi Display
    • Improved Signal Strenght
    • Ignored RSSNR signal implementation, as our RIL is not using it
    • Completely disabled useless gnss_watchlssd_thirdparty service causing drains and logspams

    Check OP for more infos and download !

    Donations
    Support Group
    2
    Installed yesterday at night and it works, pain was passing safety net, needed to install riru core, EDXposed riru, edxposed manager, hiddencore module, magiskhide props, in magisk hide hide all google apps and same for edxposed, now it glow green but now I can't setup GPay I get error OR-TAPSH-08 but what I founded It's caused by too many attempts so after waiting 24Hour it should work.

    Battery seems good enough (I installed AIO-A11-GSIs-Fixes-Emui8-v2.5.zip because A10 version last time on Android10 solved for me battery issue, maybe now it's not needed but letting everyone know if someone have issues with battery.)

    Anyway Good Job @DarkJoker360
    2
    Installed yesterday at night and it works, pain was passing safety net, needed to install riru core, EDXposed riru, edxposed manager, hiddencore module, magiskhide props, in magisk hide hide all google apps and same for edxposed, now it glow green but now I can't setup GPay I get error OR-TAPSH-08 but what I founded It's caused by too many attempts so after waiting 24Hour it should work.

    Battery seems good enough (I installed AIO-A11-GSIs-Fixes-Emui8-v2.5.zip because A10 version last time on Android10 solved for me battery issue, maybe now it's not needed but letting everyone know if someone have issues with battery.)

    Anyway Good Job @DarkJoker360
    Nice. I was wondering if GPS is working for you, does it?
    1
    I installed this on warsaw (P10 Lite) and it boots (I had to flash B326 stock firmware first tho) but wifi, bt and camera doesn't work. Also, the status bar and some other animations are laggy but thats secondary. How can I patch this rom to support wifi, bt and cameras on p10 lite?

    EDIT: Reflashing stock rom fixed the issues. Works fine now. Still a bit stuttery tho but not too bad for an old phone.
  • 9
    Hi,

    1566531179-9526.jpg


    DarkJoker360 AOSP 11 for Huawei P8 Lite 2017

    *** Stable Version ***

    About
    Android is an open source software stack for mobile devices and a corresponding open source project led by Google. This site and the Android Open Source Project (AOSP) repository offer the information and source code needed to create custom variants of the Android stack, port devices and accessories to the Android platform, and ensure devices meet the compatibility requirements that keep the Android ecosystem a healthy and stable environment for millions of users.



    Working
    * Touchscreen
    * Audio
    * Boot
    * Bluethoot
    * Internal/External storage
    * Mtp / Adb
    * Sensors
    * Wifi
    * RIL
    * Camera
    * NFC
    * FP gestures​


    Not Working
    * You tell me


    NOTE: The signal icon is buggy due to Huawei weird ril implementation, I am still looking to fix it over the new Android 10-11 telephony changes.

    Installation
    * you must have TWRP installed (The pretoriano80 one is more compatible with Q and R, so I recommend it.)
    WARNING: You must be decrypted before installing it otherwise it won't boot. (Read second post.)
    * go to TWRP and do a full wipe (system, data, cache, dalvik/art cache) !
    * format data
    * reboot to bootloader
    * extract AOSP 11
    * run: fastboot flash system <drag system.img here>
    * reboot to TWRP
    * resize system
    * flash gapps (optional)
    * flash NFC.zip
    NOTE: this zip is needed for having working NFC. DO NOT IGNORE IT !
    * reboot to System
    * Enjoy !!!​


    Update
    * reboot to TWRP and do a wipe cache, dalvik/art cache
    * reboot to bootloader
    * extract AOSP 11
    * run: fastboot flash system <drag system.img here>
    * reboot to TWRP
    * resize system
    * flash gapps (optional)
    * flash NFC.zip
    NOTE: this zip is needed for having working NFC. DO NOT IGNORE IT !
    * reboot to System
    * Enjoy !!!​


    If you are getting Error 70 while flashing gapps just resize system from TWRP !
    If gapps are giving network errors or other kind of errors install them after first boot !

    Download



    Please support my work, it's very important! Thanks
    DONATIONS

    Regards !
    9
    New AOSP 11 update

    * Synced with latest AOSP 11 source code based on r32
    * Merged March 2021 security patches
    * Fixed bootloop in some cases
    * Fixed ADB
    * Removed useless overlays
    * More build info fixes
    * Fixed AOSP ScreenRecorder
    * Performance improvements
    * Decreased system partition usage (now AOSP will just take 1,3gb)
    * Fixed a gnss service crashing since A10, resulting in costant wakelocks, logspams and gps failures
    * Added dark theme on Dialer and Messaging apps

    NOTE: Clean flash is recommended

    Check OP for more infos and download !

    Donations
    Support Group
    7
    NOTES
    * For root method read this post, for rooting with magisk read this instead.
    * If you face corrupted storage issues you need to go back on emui and re-install the rom.
    * I recommend NikGapps core with SetupWizard add-on.
    * Use 8.0.0.360 or maximum .400 firmware for booting the rom.
    * Gapps can may give "Uncertified device" error and abort the google account login, use this guide to fix it (thanks to @latviandude )
    * If you want VoLTE/Wifi Calling working flash this zip

    ** You must be decrypted for booting this rom **
    Before following the installation steps format data and flash this file via TWRP.
    6
    Magisk-phh v22.0 is now working !

    Only the linked version will work.

    1- Install magisk apk
    2- Go to twrp & flash MAGISKA11-a-only
    3- Flash Magisk-v22-canary-phh
    4- Reboot and enjoy

    Download

    Thanks to @Hami_Do
    5
    New AOSP 11 update

    • Synced with latest AOSP 11 source code based on r34
    • Merged April 2021 security patches
    • Fixed animations lags and janks
    • Fixed wired headphones not being detected
    • Fixed gps
    • Fixed ril crashes for dual sim devices
    • Updated APN configs from LineageOS
    • Fixed ril crashes with some carriers
    • Fixed Netflix playback
    • Adjusted screen brightness
    • Fixed minimum brightness too high
    • Enabled Wifi Display
    • Improved Signal Strenght
    • Ignored RSSNR signal implementation, as our RIL is not using it
    • Completely disabled useless gnss_watchlssd_thirdparty service causing drains and logspams

    Check OP for more infos and download !

    Donations
    Support Group
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone