[ROM][11] DarkJoker360 AOSP 11 for Huawei P8 Lite 2017

Search This thread

古羽千秤

New member
Jun 23, 2019
2
0
Root Access The rom is pre-rooted by default. To use root access just install this apk and enjoy root acccess ! NOTE: There is no fix for safetynet, there are many zip which block google attestation key (by kdragon) but I have not tried them. Also magisk is broken and I don't know if we will ever see it again, this is because of out old and deprecated partition layout (A-only).
Root Access The rom is pre-rooted by default. To use root access just install this apk and enjoy root acccess ! NOTE: There is no fix for safetynet, there are many zip which block google attestation key (by kdragon) but I have not tried them. Also magisk is broken and I don't know if we will ever see it again, this is because of out old and deprecated partition layout (A-only).
Root Access The rom is pre-rooted by default. To use root access just install this apk and enjoy root acccess ! NOTE: There is no fix for safetynet, there are many zip which block google attestation key (by kdragon) but I have not tried them. Also magisk is broken and I don't know if we will ever see it again, this is because of out old and deprecated partition layout (A-only).
 

DarkJoker360

Recognized Developer / Recognized Contributor
Oct 20, 2015
2,582
3,534
18
Aradeo
Hello adb
 

Attachments

  • photo_2021-02-27_14-59-55.jpg
    photo_2021-02-27_14-59-55.jpg
    137.6 KB · Views: 133

Damians82

Member
Apr 12, 2014
19
5
Hi!
I I have a problem after first boot: a continuous request of pin code every few seconds.
I use 0.5 version of pretoriano's TWRP
I tried with first release of AOSP11 and first update
I tried without GApps

But every time aosp ask me pin, It's impossible to setup aosp in my Pra-LX1.

Someone know a solution?
 

L10nH34Rt

Senior Member
Apr 3, 2007
738
91
Athens
Xiaomi Mi 8
Hi!
I I have a problem after first boot: a continuous request of pin code every few seconds.
I use 0.5 version of pretoriano's TWRP
I tried with first release of AOSP11 and first update
I tried without GApps

But every time aosp ask me pin, It's impossible to setup aosp in my Pra-LX1.

Someone know a solution?
* Use 8.0.0.360 or maximum .400 firmware for booting the rom.

Did you follow that?
 

Damians82

Member
Apr 12, 2014
19
5
* Use 8.0.0.360 or maximum .400 firmware for booting the rom.

Did you follow that?

Yes, I did it.
If i turn off and on pin request it's all ok.
I'll post a log next time

--- Update ---

This morning I had a bootloop and after a loop unblock request. No time to do anything.
No logcat file... Sorry I can't save it
 
Last edited:

Djiban

Senior Member
Aug 22, 2014
670
166
Saint Remy les chevreuse
* Use 8.0.0.360 or maximum .400 firmware for booting the rom.
I plan to install on a honor 6x with .520 as a sTock EMUI8 version ! Is there for this phone also, the same system partition 2GB/3G issue between versions? Or to to get this piece of information ?

thx

Despite that, I'm ready to try this system.img on a 3rd device (after P8 LIte and Mate 10 Lite. The honor 6X is also known as Mate 9 lite after all , and @DarkJoker360 's AOSP android 10 for P8 Lite runs on Honor 6x!). Anyway, I'm with apropiate process and files get from this thread and few others -thx everyone). I just have to know if this system partiton size change did occur on Honor 6x also.

Thx!
 

domy199

New member
Mar 13, 2021
2
0
My friend @DarkJoker360 , thanks for your release, but I have encountered 2 problems. I flashed NFC_FIX.zip but I still don't have the NFC icon. Maybe it might work even if I don't see the icon. GPS is not working. It searches for satellites but does not find them and does not lock on. Tried with various apps also to test connections but these do not happen. Finally, how do you remove that useless search bar on the home?
The stock version I used is 8.0.0.360 for PRA-L31 (it's dual sim, and I can't flash anything else anyway).
Of course I have already tried several times to flash and I have also tried with the AOSP10 but the situation does not change.
Sorry for my English, I'm Italian.

EDIT:
I also forgot that the camera has serious problems (photos with flash that are dark as if there is no flash).

EDIT:
the GPS works, the problem is the app I use.
 
Last edited:

domy199

New member
Mar 13, 2021
2
0
I can't boot it how to figure it out? I did what the installation says step by step but fails anyway.
if you use this guide it works, you have to follow it step by step. I too couldn't because I was using the wrong TWRP. Otherwise backup your important data and flash a stock rom ending .360 and then follow the guide I have linked to you
 

Passi36

Member
Oct 11, 2020
7
0
To use the right TWRP is the most important step. Because the most Boot loop and Storage Problems came from, wrong TWRP . And the GPS works here.


But I cant hide my Banking apps from the root check. Is there not a solution?
 

DarkJoker360

Recognized Developer / Recognized Contributor
Oct 20, 2015
2,582
3,534
18
Aradeo
New AOSP 11 update

* Synced with latest AOSP 11 source code based on r32
* Merged March 2021 security patches
* Fixed bootloop in some cases
* Fixed ADB
* Removed useless overlays
* More build info fixes
* Fixed AOSP ScreenRecorder
* Performance improvements
* Decreased system partition usage (now AOSP will just take 1,3gb)
* Fixed a gnss service crashing since A10, resulting in costant wakelocks, logspams and gps failures
* Added dark theme on Dialer and Messaging apps

NOTE: Clean flash is recommended

Check OP for more infos and download !

Donations
Support Group
 
Hi there

Thank's for your work. I'm planning to install it on my phone... Right now I run the stock rom with a few customization like root and magisk modules but the mayor change I did was to disable the disk encryption to enable the memory extension with the sd card... Thant's allow me to install many many apps (obviously) and it works good so far ! But the most important thing is that I have the stock camera. I tried the LOS 15 last year but the camera was too bad for me... So, because I'm planning to switch to a newer ROM like this AOSP I want to be sure that the camera works well as the stock one... If not is there a possibility to get the stock camera on this AOSP ?

Thanks
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    Magisk-phh v22.0 is now working !

    Only the linked version will work.

    1- Install magisk apk
    2- Go to twrp & flash MAGISKA11-a-only
    3- Flash Magisk-v22-canary-phh
    4- Reboot and enjoy

    Download

    Thanks to @Hami_Do
    6
    New AOSP 11 update

    • Synced with latest AOSP 11 source code based on r34
    • Merged April 2021 security patches
    • Fixed animations lags and janks
    • Fixed wired headphones not being detected
    • Fixed gps
    • Fixed ril crashes for dual sim devices
    • Updated APN configs from LineageOS
    • Fixed ril crashes with some carriers
    • Fixed Netflix playback
    • Adjusted screen brightness
    • Fixed minimum brightness too high
    • Enabled Wifi Display
    • Improved Signal Strenght
    • Ignored RSSNR signal implementation, as our RIL is not using it
    • Completely disabled useless gnss_watchlssd_thirdparty service causing drains and logspams

    Check OP for more infos and download !

    Donations
    Support Group
    2
    Installed yesterday at night and it works, pain was passing safety net, needed to install riru core, EDXposed riru, edxposed manager, hiddencore module, magiskhide props, in magisk hide hide all google apps and same for edxposed, now it glow green but now I can't setup GPay I get error OR-TAPSH-08 but what I founded It's caused by too many attempts so after waiting 24Hour it should work.

    Battery seems good enough (I installed AIO-A11-GSIs-Fixes-Emui8-v2.5.zip because A10 version last time on Android10 solved for me battery issue, maybe now it's not needed but letting everyone know if someone have issues with battery.)

    Anyway Good Job @DarkJoker360
    2
    Installed yesterday at night and it works, pain was passing safety net, needed to install riru core, EDXposed riru, edxposed manager, hiddencore module, magiskhide props, in magisk hide hide all google apps and same for edxposed, now it glow green but now I can't setup GPay I get error OR-TAPSH-08 but what I founded It's caused by too many attempts so after waiting 24Hour it should work.

    Battery seems good enough (I installed AIO-A11-GSIs-Fixes-Emui8-v2.5.zip because A10 version last time on Android10 solved for me battery issue, maybe now it's not needed but letting everyone know if someone have issues with battery.)

    Anyway Good Job @DarkJoker360
    Nice. I was wondering if GPS is working for you, does it?
    1
    I installed this on warsaw (P10 Lite) and it boots (I had to flash B326 stock firmware first tho) but wifi, bt and camera doesn't work. Also, the status bar and some other animations are laggy but thats secondary. How can I patch this rom to support wifi, bt and cameras on p10 lite?

    EDIT: Reflashing stock rom fixed the issues. Works fine now. Still a bit stuttery tho but not too bad for an old phone.
  • 10
    Hi,

    1566531179-9526.jpg


    DarkJoker360 AOSP 11 for Huawei P8 Lite 2017

    *** Stable Version ***

    About
    Android is an open source software stack for mobile devices and a corresponding open source project led by Google. This site and the Android Open Source Project (AOSP) repository offer the information and source code needed to create custom variants of the Android stack, port devices and accessories to the Android platform, and ensure devices meet the compatibility requirements that keep the Android ecosystem a healthy and stable environment for millions of users.



    Working
    * Touchscreen
    * Audio
    * Boot
    * Bluethoot
    * Internal/External storage
    * Mtp / Adb
    * Sensors
    * Wifi
    * RIL
    * Camera
    * NFC
    * FP gestures​


    Not Working
    * You tell me


    NOTE: The signal icon is buggy due to Huawei weird ril implementation, I am still looking to fix it over the new Android 10-11 telephony changes.

    Installation
    * you must have TWRP installed (The pretoriano80 one is more compatible with Q and R, so I recommend it.)
    WARNING: You must be decrypted before installing it otherwise it won't boot. (Read second post.)
    * go to TWRP and do a full wipe (system, data, cache, dalvik/art cache) !
    * format data
    * reboot to bootloader
    * extract AOSP 11
    * run: fastboot flash system <drag system.img here>
    * reboot to TWRP
    * resize system
    * flash gapps (optional)
    * flash NFC.zip
    NOTE: this zip is needed for having working NFC. DO NOT IGNORE IT !
    * reboot to System
    * Enjoy !!!​


    Update
    * reboot to TWRP and do a wipe cache, dalvik/art cache
    * reboot to bootloader
    * extract AOSP 11
    * run: fastboot flash system <drag system.img here>
    * reboot to TWRP
    * resize system
    * flash gapps (optional)
    * flash NFC.zip
    NOTE: this zip is needed for having working NFC. DO NOT IGNORE IT !
    * reboot to System
    * Enjoy !!!​


    If you are getting Error 70 while flashing gapps just resize system from TWRP !
    If gapps are giving network errors or other kind of errors install them after first boot !

    Download



    Please support my work, it's very important! Thanks
    DONATIONS

    Regards !
    9
    New AOSP 11 update

    * Synced with latest AOSP 11 source code based on r32
    * Merged March 2021 security patches
    * Fixed bootloop in some cases
    * Fixed ADB
    * Removed useless overlays
    * More build info fixes
    * Fixed AOSP ScreenRecorder
    * Performance improvements
    * Decreased system partition usage (now AOSP will just take 1,3gb)
    * Fixed a gnss service crashing since A10, resulting in costant wakelocks, logspams and gps failures
    * Added dark theme on Dialer and Messaging apps

    NOTE: Clean flash is recommended

    Check OP for more infos and download !

    Donations
    Support Group
    7
    NOTES
    * For root method read this post, for rooting with magisk read this instead.
    * If you face corrupted storage issues you need to go back on emui and re-install the rom.
    * I recommend NikGapps core with SetupWizard add-on.
    * Use 8.0.0.360 or maximum .400 firmware for booting the rom.
    * Gapps can may give "Uncertified device" error and abort the google account login, use this guide to fix it (thanks to @latviandude )
    * If you want VoLTE/Wifi Calling working flash this zip

    ** You must be decrypted for booting this rom **
    Before following the installation steps format data and flash this file via TWRP.
    6
    New AOSP 11 update

    • Synced with latest AOSP 11 source code based on r34
    • Merged April 2021 security patches
    • Fixed animations lags and janks
    • Fixed wired headphones not being detected
    • Fixed gps
    • Fixed ril crashes for dual sim devices
    • Updated APN configs from LineageOS
    • Fixed ril crashes with some carriers
    • Fixed Netflix playback
    • Adjusted screen brightness
    • Fixed minimum brightness too high
    • Enabled Wifi Display
    • Improved Signal Strenght
    • Ignored RSSNR signal implementation, as our RIL is not using it
    • Completely disabled useless gnss_watchlssd_thirdparty service causing drains and logspams

    Check OP for more infos and download !

    Donations
    Support Group
    6
    Magisk-phh v22.0 is now working !

    Only the linked version will work.

    1- Install magisk apk
    2- Go to twrp & flash MAGISKA11-a-only
    3- Flash Magisk-v22-canary-phh
    4- Reboot and enjoy

    Download

    Thanks to @Hami_Do
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone