• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Development [ROM][11][Mojito][Sunny] Pixel Experience [OFFICIAL][AOSP]

Search This thread

thesinan

Member
May 24, 2016
35
17
For v202 nothing extra is needed
photo quality very similar gcam i'm suprise but 4k video rec still doesn't work.

i found why wide angle doesn't work. module id diffent i guess. in the gcam witchaya i select 3 module but i switch 5 module and i noticed wide angle id is diffent (id4). now wide angle open also anx cam. wierd o.0
 

Kyrinyel

Member
Apr 4, 2017
40
5
saddam's hideout
Guys... is the ram clearing up fast a part of the of the new update? Does anybody else have this problem? Or is this a firmware thing in case I have to revert to stock before updating?
EDIT: here's a screen recording for this new RAM management. Looks like all apps are refreshing on reopening which did not happen in August Build. Free RAM still over 1000 MB. Just to note, my redmi 3S with 3 GBs of RAM (also running PX) was able to hold all 7 same apps without refreshing on reopening, on top of that, all apps except core core apps like Files were stably suspended for 20 minutes with screen turned off.
UPDATE: flashed stock firmware and clean flashed pixel Exp again to encounter the same aggressive RAM management. Leaving Pixel Experience for now.
 

Attachments

  • screen-20210929-200250.mp4
    64.5 MB · Views: 0
Last edited:

akoaypinoy

Senior Member
Aug 1, 2021
275
58
Guys... is the ram clearing up fast a part of the of the new update? Does anybody else have this problem? Or is this a firmware thing in case I have to revert to stock before updating?
EDIT: here's a screen recording for this new RAM management. Looks like all apps are refreshing on reopening which did not happen in August Build. Free RAM still over 1000 MB. Just to note, my redmi 3S with 3 GBs of RAM (also running PX) was able to hold all 7 same apps without refreshing on reopening, on top of that, all apps except core core apps like Files were stably suspended for 20 minutes with screen turned off.
UPDATE: flashed stock firmware and clean flashed pixel Exp again to encounter the same aggressive RAM management. Leaving Pixel Experience for now.
Your ram is 4gb? Right
 

amandal1810

Member
Jan 22, 2016
7
2
Question:
I'm planning to buy the redmi note 10 for my dad. I'll be installing Pixel experience on it. But I recently discovered that this device uses a virtual proximity sensor instead of a hardware proximity sensor. Can anyone here confirm how's the experience with it when using the pixel experience rom? Is there any accidental phone activations when the device is in pocket? Is there a pocket mode available on PE rom? I know MIUI has a pocket mode.
The question is basically relevant for any device using a virtual proximity sensor.
Any help appreciated. TIA.
 

Coff33Singh

Member
Dec 21, 2016
8
4
Redmi K20 Pro
Question:
I'm planning to buy the redmi note 10 for my dad. I'll be installing Pixel experience on it. But I recently discovered that this device uses a virtual proximity sensor instead of a hardware proximity sensor. Can anyone here confirm how's the experience with it when using the pixel experience rom? Is there any accidental phone activations when the device is in pocket? Is there a pocket mode available on PE rom? I know MIUI has a pocket mode.
The question is basically relevant for any device using a virtual proximity sensor.
Any help appreciated. TIA.
Never the phone was activated in the pocket.

The sensor does okay job, sometimes it won't detect the face close to itself and won't turn off the screen during the call, so just pull it away and bring closer and voila! It will turn off the screen. But this also happens once in like 30 calls. I guess, it also takes in what you were previously doing and what was the rotation value as well. Haven't been able to figure it out yet.

I'd say, go for it. Haven't been disappointed a tiny bit with this device.
 

amandal1810

Member
Jan 22, 2016
7
2
Never the phone was activated in the pocket.

The sensor does okay job, sometimes it won't detect the face close to itself and won't turn off the screen during the call, so just pull it away and bring closer and voila! It will turn off the screen. But this also happens once in like 30 calls. I guess, it also takes in what you were previously doing and what was the rotation value as well. Haven't been able to figure it out yet.

I'd say, go for it. Haven't been disappointed a tiny bit with this device.
Thank you so much for this valuable info! I spent hours looking for info around this especially in the context of Pixel Experience ROM. The only alternative option is the Moto G40 Fusion but it does not have a magnetometer (so no compass apps) for some unfathomable reason. I think i'll go for the Redmi Note 10. Thanks again! :)
 
  • Like
Reactions: Coff33Singh

Shrihari007

Senior Member
Apr 17, 2012
574
263
Finally installed the rom after long wait. Everything works really good. Thanks to developer. Here are some minor issues I'm facing

1. Bluetooth ear phone on third party apps has too low voice. (Mic issues)
2. Brightness auto adjustment does not work fine. It's always too low or too bright
3. Scrolling sometimes does not work smoothly.
4. Apps in background are cleared very frequently.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Yes

    Everything is up to date

    But still the error

    Is this because of the PE Rom
    Tested from a diff device but why don't you try this fix
    Just in case someone is facing an issue with a login on YT Vanced v16.02.35, follow the below steps to fix the issue:

    *The microG has some incompatibility issue with YT Vanced v16.02.35, hence the signing issue.

    1. Disable/Uninstall Chrome for Android.
    2. Uninstall MicroG, YT Vanced, YT Vanced Music
    3. Using the Vanced Manager install the Latest microG v0.2.16.204713
    4. Now install YT Vanced v15.43.32
    5. Open YT Vanced and signing.
    6. Now you can update YT Vanced or YT Vanced Music.

    Tested on Oneplus 6T ♥
    1
    Yes

    Everything is up to date

    But still the error

    Is this because of the PE Rom
    I'm also using vanced on this rom, so it's not possible. Try re installing (make sure to remove microg as well)
    1
    Did the same

    Using Vanced Manager
    To do so
    But the shows the same error
    then your last chance is trying to install Vanced with Root... i don't have any issues with that way
    1
    Tested from a diff device but why don't you try this fix
    Indeed it works

    Disabled all the Google apps and services

    Followed the above steps

    And at last click "Huawei" instead of "Sign in"

    Thanks
  • 48

    GtwTyCR.png

    PixelExperience for Redmi Note 10 [mojito/sunny]

    What is this?
    Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)

    Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device

    Based on Android 11.0



    Whats working?
    Wifi
    RIL
    Mobile data
    GPS
    Camera
    Flashlight
    Camcorder
    Bluetooth
    Fingerprint reader
    Lights
    Sound / vibration


    Known issues
    Nothing

    HOW TO FLASH PE
    Guide

    DON'T FLASH GAPPS, ALREADY INCLUDED
    Download


    Donate
    Liked my work? Give me a beer

    Translation
    Help with project translation

    Stay tuned
    Our Telegram channel


    14
    Update (25/09/21):

    Changelog:
    • Fixed libperfmgr nodes crash
    • Added power stats moke service hals
    • Smarter decisions on whether to use 2/5Ghz AP
    • Disabled wifi firmware logging
    • Disabled NUD failure occurs logging
    • Added stock permission for hwcomposer service
    • Fixed ueventd permissions crash
    • Switched to multihal sensor service hal to 2.1
    • Enabled Wi-Fi hals power saving
    • Switched to Codec2 by default
    • Enabled Codec2 input surface
    • Enabled dalvik dex2oat64
    • Fixed props crashes in logs
    • Added minimal xiaomi parts
    • Fixed SDM and ultrasound_extn crashes
    • Fixed whatsapp mic delay or crashes
    • Improved overall system performance
    • Mic issue is fixed other variant
    11
    Source Changelog:
    • September security patch
    • Updated translations
    • Fixed safetynet
    • Others fixes

    Device Changelog:
    • Decommonized display color modes
    • Dropped useless soundtrigger
    • Updated WI-Fi display blobs from CAF
    • Defined OEM fast charge sysfs node
    • Set voice call volume steps to 10
    • Addressed more sepolicy rules
    • Added Xiaomi mlipay service blobs
    • Added Alipay and WeChat fingerprint payment support
    • Updated USB init configs from CAF tag
    • Added missing usb props
    • Switched to old touch FW
    • Updated device cutout corners
    • Dropped useless/unused blobs
    • Fixed touch issue
    • Fixed wifi display cast
    • Fixed thermal crash
    • Fixed Whatsapp/third party apps volume controls
    • Improved kernel optimization
    • Rest I forgot
    10
    ZIDAN44 is not active on XDA since the end of May. Must be some personal problems. If his health permits, I'm sure he'll be back again. This kind of work is also a personal interest and pleasure of every developer. The only question is whether he will continue his original work.
    Ha ha.. Updates will come soon.. :D
    9
    Update (22/9/21):

    Changelog:
    • Bring back full stack of audio ACDB
    • Update blobs from V12.5.3.0.RKGMIXM
    • Added main display cutout overlays
    • Fixed dimens values for display cutout
    • Updated brightness overlay configs
    • Added camera cutout ring like memeui
    • Removed virtual framebuffer cmdline
    • Labeled some more wakeup nodes
    • Switched to aosp WiFi Display
    • Mic issue is fixed other variant