• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][11][OFFICIAL] crDroid v7.12 [X01BD]

Search This thread

ish.org

Senior Member
Mar 7, 2015
57
5
Tokyo
Thank you for v7.8.
I updated by OTA, and reinstall NikGapps-core-arm64-11-20210704-signed.zip because of boot loop occured.
It works fine other than zenparts->vibration strength.
 

ish.org

Senior Member
Mar 7, 2015
57
5
Tokyo
Thank you for v7.9.
I updated by OTA, and reinstall NikGapps-core-arm64-11-20210804-signed.zip and NikGapps-Addon-11-Gmail-20210804-signed.zip because of boot loop occured.
It works fine other than zenparts->vibration strength.
 

legacy07

Senior Member
May 6, 2018
189
385
KL-34
Thank you for v7.9.
I updated by OTA, and reinstall NikGapps-core-arm64-11-20210804-signed.zip and NikGapps-Addon-11-Gmail-20210804-signed.zip because of boot loop occured.
It works fine other than zenparts->vibration strength.
You may use mindthegapps instead (find the link from OP). It's a bit outdated but cause no bootloops on upgrade.

Vibration strength is working fine here even under enforcing state. Send me logs.
 

ish.org

Senior Member
Mar 7, 2015
57
5
Tokyo
You may use mindthegapps instead (find the link from OP). It's a bit outdated but cause no bootloops on upgrade.

Thank you for reply.
I'll install mindthegapps next time.
Vibration strength is working fine here even under enforcing state. Send me logs.

Thank you very much.
I sent logcat via conversation.
And changing Zenparts->SELinux mode from permissive to enforced makes 'ZenParts keeps stopping'.
 

ish.org

Senior Member
Mar 7, 2015
57
5
Tokyo
It's working here. I'd suggest you a clean install
I clean installed crDroidAndroid-11.0-20210811-X01BD-v7.9.zip and MindTheGapps-11.0.0-arm64-20210412_124247.zip, and restored apps from google drive and the same issue happened.
The stock firmware of UL-ASUS_X01BD-WW-17.2018.2004.424-user.zip was used before the first crDroid (crDroidAndroid-10.0-20200610-X01BD-v6.7.zip) was installed.
Was this an infuluence ? Or is it bad to restore apps from google drive ?
 

ish.org

Senior Member
Mar 7, 2015
57
5
Tokyo
I clean installed crDroidAndroid-11.0-20210811-X01BD-v7.9.zip and MindTheGapps-11.0.0-arm64-20210412_124247.zip, and restored apps from google drive and the same issue happened.
The stock firmware of UL-ASUS_X01BD-WW-17.2018.2004.424-user.zip was used before the first crDroid (crDroidAndroid-10.0-20200610-X01BD-v6.7.zip) was installed.
Was this an infuluence ? Or is it bad to restore apps from google drive ?
I reinstalled cleanly as follows.
(1) factory reset
(2) format data
(3) advanced wipe (Dalvik/ART cache, cache, data, internal storage, system and micro SD card)
(4) install crDroidAndroid-11.0-20210811-X01BD-v7.9.zip from USB-OTG.
crDroidAndroid-11.0-20210811-X01BD-v7.9.zip was checked by sha1.
(5) reboot to recovery
(6) install MindTheGapps-11.0.0-arm64-20210412_124247.zip from USB-OTG.
MindTheGapps-11.0.0-arm64-20210412_124247.zip was checked by md5.
(7) reboot to system
(8) WiFi setting
(9) skip data copy
(10) skip google restore.
(11) skip finger print setting
(12) skip restoring apps and data
But the same issue happened.
 

michael_hamada

Senior Member
I reinstalled cleanly as follows.
(1) factory reset
(2) format data
(3) advanced wipe (Dalvik/ART cache, cache, data, internal storage, system and micro SD card)
(4) install crDroidAndroid-11.0-20210811-X01BD-v7.9.zip from USB-OTG.
crDroidAndroid-11.0-20210811-X01BD-v7.9.zip was checked by sha1.
(5) reboot to recovery
(6) install MindTheGapps-11.0.0-arm64-20210412_124247.zip from USB-OTG.
MindTheGapps-11.0.0-arm64-20210412_124247.zip was checked by md5.
(7) reboot to system
(8) WiFi setting
(9) skip data copy
(10) skip google restore.
(11) skip finger print setting
(12) skip restoring apps and data
But the same issue happened.
Yes, I can confirm the issue of vibration setting too.
I can't save vibration strength value in ZenParts.
And 'Touch vibration' doesn't work for me yet.
On the other hand, the issue of 'Hide nav bar' setting was solved with v7.9.
Anyway, these are not critical for me.
THX!
 

ish.org

Senior Member
Mar 7, 2015
57
5
Tokyo
Yes, I can confirm the issue of vibration setting too.
I can't save vibration strength value in ZenParts.
And 'Touch vibration' doesn't work for me yet.
On the other hand, the issue of 'Hide nav bar' setting was solved with v7.9.
Anyway, these are not critical for me.
Thank you for reply and confirm.
And these are not critical for me, too.
 

ish.org

Senior Member
Mar 7, 2015
57
5
Tokyo
I udated to v7.10 by OTA from v7.9 and MindTheGapps-11.0.0-arm64-20210412_124247.zip, and bootloop occured.
Then I reinstall MindTheGapps-11.0.0-arm64-20210412_124247.zip and it works fine.
Now, ZenParts-> Vibration strength can be saved fine.
Thank you for v7.10.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 8
    BE3pE0l.png

    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today


    Features:
    https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn

    Flashing Instructions:

    Pre-installation:

    First time installation:

    • First time installation:
    • Backup your data to PC, OTG flash drive
    • Reboot to recovery
    • Factory reset from recovery and format data (where you type "yes")
    • Reboot to recovery
    • Flash crDroid zip and Recovery
    • Reboot to recovery
    • Flash gapps and reboot to system
    • After passed setup screen, reboot to Recovery and flash Magisk zip
    • Enjoy

    Update installation:
    • Boot to recovery
    • Flash crDroid zip and recovery then reboot to recovery
    • Flash gapps, Magisk and reboot to system
    • Enjoy


    Sources:
    ROM: https://github.com/crdroidandroid
    Kernel: https://github.com/legacyO7/katnis_

    Download:
    ROM https://crdroid.net/X01BD
    Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/11.0/changelog_X01BD.txt

    Known issues:
    You tell me!

    Visit official website @ crDroid.net
    Donate to help our team pay server costs


    XDA:DevDB Information
    [ROM][11][OFFICIAL] crDroid v7.12 [X01BD], ROM for the Asus Zenfone Max Pro M2

    Contributors
    legacy07
    ROM OS Version: Android 11
    ROM Kernel: Linux 4.x
    Based On: LineageOS

    Version Information
    Status:
    Stable
    Current Stable Version: 7.12
    Stable Release Date: 2021-11-15

    Created 2020-11-22
    Last Updated 2021-11-15
    3

    v7.6 and above


    Use MindtheGapps to avoid bootloops

    * Encrypted build

    Recommendations:
    - OrangeFox 11.1
    - Clean Install

    Notes:
    - Follow OrangeFox Thread for encryption/decryption procedure from HERE
    - Format Internal Storage, if opting for encryption

    * In case of bootloop
    - Flash gapps again
    - For microg/vanilla users, flash this fix (courtesy of @Tyakrish)
    2
    Hi there.
    Fisrt, thanks for your work!

    Do you think to make long-term rom support (some month)? (don'tDon't take it bad, it's just to know :) )


    Wich Gapps must i use ? NickGapps R, right? Edit, it's ok, it work!

    Max wifi is 20M, how to increase to the max possible on this phone, around 50M, any solution?
    2
    Thank you for v7.3 (20210209).
    After updating to v7.3 with OTA, a boot loop occurred.
    Therefore, I dirty flashed NikGapps-core-arm64-11-20210130-signed.zip with TWRP and it started normally.
    Bluetooth headphones work well.
    ZenParts -> Vibration couldn't be saved.
    Bootloop is caused by the latest nikgapps. Downgrade nikgapps untill the developer fixes the issue or it'll happen again
    Zenparts have some sepolicy denials. You can fix it for now by going permissive, which isn't recommended
    2
    Please, one last build, 6.14...
    Sorry, I don't have the sufficient resources to sync q again