[ROM][11][OFFICIAL] crDroid v7.15 [X01BD]

Search This thread

legacy07

Senior Member
May 6, 2018
192
390
KL-34
BE3pE0l.png

Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned


crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today


Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn

Flashing Instructions:

Pre-installation:

First time installation:

  • First time installation:
  • Backup your data to PC, OTG flash drive
  • Reboot to recovery
  • Factory reset from recovery and format data (where you type "yes")
  • Reboot to recovery
  • Flash crDroid zip and Recovery
  • Reboot to recovery
  • Flash gapps and reboot to system
  • After passed setup screen, reboot to Recovery and flash Magisk zip
  • Enjoy

Update installation:
  • Boot to recovery
  • Flash crDroid zip and recovery then reboot to recovery
  • Flash gapps, Magisk and reboot to system
  • Enjoy


Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/legacyO7/katnis_

Download:
ROM https://crdroid.net/X01BD
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/11.0/changelog_X01BD.txt

Known issues:
You tell me!

Visit official website @ crDroid.net
Donate to help our team pay server costs


XDA:DevDB Information
[ROM][11][OFFICIAL] crDroid v7.15 [X01BD], ROM for the Asus Zenfone Max Pro M2

Contributors
legacy07
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
Based On: LineageOS

Version Information
Status:
Stable
Current Stable Version: 7.15
Stable Release Date: 2022-02-20

Created 2020-11-22
Last Updated 2022-02-20
 
Last edited:

legacy07

Senior Member
May 6, 2018
192
390
KL-34

v7.6 and above

* Encrypted build

Recommendations:
- OrangeFox 11.1
- Clean Install

Notes:
- Follow OrangeFox Thread for encryption/decryption procedure from HERE
- Format Internal Storage, if opting for encryption

* In case of bootloop
- Flash gapps again
 
Last edited:

Arnabsanu

Member
Jul 19, 2016
23
5
Kolkata
Use the full gestural nav. There is big gap between bottom of the screen and the app icon on the drawer.
This gap doesnt appear if you use 3 button navigation.
Ah, okay, didn't check that. Two things I found to be problematic.
1. Other devices don't connect to hotspot while password is enabled.
2. System ui is laggy while blur is enabled. After disabling blur in developer option, the lag was gone.
Due to the 1st problem I had to revert back to A10 for now.:(
 
  • Like
Reactions: le_monkeh

michael_hamada

Senior Member
Thanks so much, devs.
This beta seems to be pretty stable so far for me.
But there are 2 issues to report.

1. Navigation bar visibility setting in crDroid settings will be reset on every boot.
2. Only the latest Magisk beta(21.1) could be installed successfully (IDKW).

Anyway, thanks for your hard work.
Regards:good:
 
Last edited:

michael_hamada

Senior Member
Thank you, legacy07.
7.1 works well for me overall.

- Especially, restoration of the "Sound" tile to QS panel made me so happy!
- OTA works, but should manually flash Magisk again. (Not a big issue.)
- "Enable/Disable Navigation bar" in crDroid setting still won't be saved. (Little bit annoying...)

THX
 

Mazda932

Member
Apr 24, 2019
48
6
Hi there.
Fisrt, thanks for your work!

Do you think to make long-term rom support (some month)? (don'tDon't take it bad, it's just to know :) )


Wich Gapps must i use ? NickGapps R, right? Edit, it's ok, it work!

Max wifi is 20M, how to increase to the max possible on this phone, around 50M, any solution?
 
Last edited:

ish.org

Senior Member
Mar 7, 2015
65
5
Tokyo
I have installed v7.2 (20210109) cleanly.
Here is my problem:
1. WiFi wpa2 TLS authentication has corrupted the CA certificate. This may be due to a memory leak.
2. Bluetooth headphones (SBC/AptX/LDAC) can be connected, but there is no sound.
3. ZenParts -> Vibration cannot be saved.
 

Prabhat69

Senior Member
Nov 24, 2015
90
10
I have installed v7.2 (20210109) cleanly.
Here is my problem:
1. WiFi wpa2 TLS authentication has corrupted the CA certificate. This may be due to a memory leak.
2. Bluetooth headphones (SBC/AptX/LDAC) can be connected, but there is no sound.
3. ZenParts -> Vibration cannot be saved.
Does AAC works..
 

ish.org

Senior Member
Mar 7, 2015
65
5
Tokyo
Today, bluetooth headphones are operational with AAC/LDAC codecs. AptX codec is not operational (No sound and repeated to connected/disconnected.)
The difference of today and 2days ago, I installed magisk 8.0.7 and EdXposed 93.0(93-v0.5.1.4_4669_master(SandHook)), yesterday.
 

kitikawaii

New member
May 12, 2012
4
0
In previous versions of Android 10, I was able to use NTFS on my SD card, but not after upgrading to Android 11. Please enable
 

Top Liked Posts

  • There are no posts matching your filters.
  • 8
    BE3pE0l.png

    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today


    Features:
    https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn

    Flashing Instructions:

    Pre-installation:

    First time installation:

    • First time installation:
    • Backup your data to PC, OTG flash drive
    • Reboot to recovery
    • Factory reset from recovery and format data (where you type "yes")
    • Reboot to recovery
    • Flash crDroid zip and Recovery
    • Reboot to recovery
    • Flash gapps and reboot to system
    • After passed setup screen, reboot to Recovery and flash Magisk zip
    • Enjoy

    Update installation:
    • Boot to recovery
    • Flash crDroid zip and recovery then reboot to recovery
    • Flash gapps, Magisk and reboot to system
    • Enjoy


    Sources:
    ROM: https://github.com/crdroidandroid
    Kernel: https://github.com/legacyO7/katnis_

    Download:
    ROM https://crdroid.net/X01BD
    Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/11.0/changelog_X01BD.txt

    Known issues:
    You tell me!

    Visit official website @ crDroid.net
    Donate to help our team pay server costs


    XDA:DevDB Information
    [ROM][11][OFFICIAL] crDroid v7.15 [X01BD], ROM for the Asus Zenfone Max Pro M2

    Contributors
    legacy07
    ROM OS Version: Android 11
    ROM Kernel: Linux 4.x
    Based On: LineageOS

    Version Information
    Status:
    Stable
    Current Stable Version: 7.15
    Stable Release Date: 2022-02-20

    Created 2020-11-22
    Last Updated 2022-02-20
    3

    v7.6 and above

    * Encrypted build

    Recommendations:
    - OrangeFox 11.1
    - Clean Install

    Notes:
    - Follow OrangeFox Thread for encryption/decryption procedure from HERE
    - Format Internal Storage, if opting for encryption

    * In case of bootloop
    - Flash gapps again
    3
    Sorry, I'm not able to release v7.16 as promised and I have officially dropped the support for X01BD. It's been a good run, nice knowing ya all!
    2
    Thank you for v7.3 (20210209).
    After updating to v7.3 with OTA, a boot loop occurred.
    Therefore, I dirty flashed NikGapps-core-arm64-11-20210130-signed.zip with TWRP and it started normally.
    Bluetooth headphones work well.
    ZenParts -> Vibration couldn't be saved.
    Bootloop is caused by the latest nikgapps. Downgrade nikgapps untill the developer fixes the issue or it'll happen again
    Zenparts have some sepolicy denials. You can fix it for now by going permissive, which isn't recommended
    2
    Hi there.
    Fisrt, thanks for your work!

    Do you think to make long-term rom support (some month)? (don'tDon't take it bad, it's just to know :) )


    Wich Gapps must i use ? NickGapps R, right? Edit, it's ok, it work!

    Max wifi is 20M, how to increase to the max possible on this phone, around 50M, any solution?