[ROM][11][OFFICIAL] PixysOS v4.0.2 [KARNA][SURYA][16.10.2020]

Search This thread

slavislavi

Senior Member
Feb 25, 2008
238
45
Any fix for mobile data in PixysOS-v4.0.2-GAPPS-surya-OFFICIAL-20201214-100422 ? It doesn't work, wifi is ok.
 

michaelr8

Member
Dec 11, 2020
17
5
[QUOTE = "mahajant99, publicación: 83720683, miembro: 9505787"]
pixys_banner.png


[CÓDIGO] #include <std_disclaimer.h>
/ *
* ¿Su garantía es ... todavía válida?
*
* No soy responsable de dispositivos bloqueados, tarjetas SD muertas,
* guerra termonuclear, o te despiden porque la aplicación de alarma falló. Por favor
* Investigue un poco si tiene alguna inquietud sobre las funciones incluidas en esta ROM
* ¡antes de flashearlo! USTED elige hacer estas modificaciones y si
* me señalas con el dedo por estropear tu dispositivo, me reiré de ti.
*/[/CÓDIGO]


about.png

Pixys es un firmware de posventa de Android suave como la mantequilla. Seleccionamos cuidadosamente las mejores características y le estamos agregando nuestro propio jugo.
Prepárese para probar las características únicas que trae consigo.
Nuestro objetivo es ofrecer una experiencia con ideas y características originales junto con las cosas útiles a las que la comunidad está acostumbrada.

team.png

[usuario = 7868666] @Subinsmani [/ usuario]
[usuario = 4912374] @ rahul9999 [/ usuario]
[usuario = 7598239] @@ ki [/ usuario]
[user = 8338700] @Shreejoy Dash [/ user]
[usuario = 7277582] @kvijaya [/ usuario]
[usuario = 5057155] @ AxelBlaz3 [/ usuario]
[user = 6237352] @ Psycho-Mods [/ user]
[usuario = 8499818] @aswin_a_s [/ usuario]
[usuario = 248875] @gero [/ usuario]
[usuario = 7817959] @melvingarcia [/ usuario]

donation.png
]

Apóyanos si te gusta nuestro trabajo

[TAMAÑO = + 1] ¿Tiene algún problema o sugerencia? Comuníquese con nosotros en [/ SIZE]
Telegrama : https://telegram.me/pixysos_chat

features.png


Próximamente :)

source.png

Pixys: PixysOS
Fuentes del dispositivo Pixys : PixysOSDevices

install.png

- Copia de seguridad de sus datos personales (importante)
- Descarga la ROM.
- Arranque en recuperación (se recomienda TWRP ).
- Actualice la ROM.
- Formato de datos.
- Reinicia tu dispositivo.

La ROM tiene persistencia de GApps entre flashes sucios, ¡así que solo tienes que flashearlos una vez!
La solución raíz debe actualizarse junto con cada actualización (= Actualización de ROM)


Soluciones raíz actualmente admitidas:

Magisk estable
Las versiones de Magisk superiores a 14.0 no requieren flash en cada flash sucio dependiendo del dispositivo, algunos dispositivos necesitan que lo flashees cada vez, a menos que tu mantenedor diga lo contrario, debería estar bien

download.png

ROM: compilaciones unificadas

known_issues.png

- Háganos saber si hay alguno.

credits.png


- Google para AOSP
- AOSCP
- Unicornios sucios
- Experiencia de píxeles
- AOSP extendido
- LineageOS
- Os de nitrógeno
- Rom de contrabandistas
- SO superior
- Equipo AICP & POSP para idea de plantilla de hilo
- También muchos desarrolladores profesionales que nos ayudan a traerte esta rom.
- Háganos saber si olvidamos mencionar su nombre en los créditos.​

XDA: Información de DevDB [/ PLAIN][/SIZE][/U][/B]
[SIZE=3][B]PixysOS, ROM para Xiaomi Poco X3 NFC[/B][/SIZE]

[B][U]Colaboradores[/U][/B]
[URL='https://forum.xda-developers.com/member.php?u=9505787']mahajant99[/URL]
[B]Código fuente: [/B] [URL]https://github.com/mahajant99/kernel_xiaomi_surya[/URL]

[B]Versión del SO ROM:[/B] Android 11
[B]Kernel de ROM:[/B] Linux 4.x
[B]Basado en:[/B] AOSP

[B][U]Información de versión[/U]
Estado:[/B] estable

[B]Creado[/B] 2020-10-16
[B]Última actualización[/B] 2020-11-24
[/CITAR]
El formato de almacenamiento portátil no funciona ... Borro mi memoria 😢
y el botón de navegación solo tiene un modo y es el más incómodo ... The format of my sd card is exFAT

[ATTACH type="full" alt="Ícono de validado por la comunidad"]5160777[/ATTACH]
 

Attachments

  • 1608269245093.png
    1608269245093.png
    312 bytes · Views: 44
Last edited:

mahajant99

Senior Member
Oct 16, 2018
175
463
19
Delhi
github.com
14/12/2020

Changelog:

• Fixed 5Ghz WiFi
• Fixed HDR
• Add FM support
• Add postprocessing blobs
• Add Display Hardware blobs
• Add missing stuff for WFD
• Few minor changes
• Update fp from sunfish December
 
Last edited:

Tuanl

Member
May 17, 2019
21
1
Hanoi
Xiaomi Poco F3
Redmi Note 10
Really smooth and beautiful. The only problem is sometimes the screen randomly switch back to ~60-70Hz for about 5 secs. Nothing to serious though. Definitely one of the best ROM for Poco X3 currently.
Thanks dev so much !!
 

MJ73

New member
Jan 4, 2021
2
0
Hi, I'm new to the PixysOS. I just flashed the PixysOS-v4.0.3-GAPPS-surya-OFFICIAL-20201222-092800 rom, and my phone keep giving me endless notification saying "The device isn't Play Protect certified". Am I missing any steps?
 

sumo_

New member
Jan 5, 2021
2
2
Hi, I'm new to the PixysOS. I just flashed the PixysOS-v4.0.3-GAPPS-surya-OFFICIAL-20201222-092800 rom, and my phone keep giving me endless notification saying "The device isn't Play Protect certified". Am I missing any steps?

I feel you man. I think thats normal, you need to take some steps to "certify" the phone to Google. Until then it will spam you and you cannot use GPay etc. I feel like there was no guides that I could dig up that covered the entire end to end process, most cover a single tiny aspect making it very difficult for any newcomers.

This was my first time in a very long time unlocking/rooting/custom-rom'ing an Android device, making me regret the switch from the easy life of Apple tbh.

I managed to get my phone working quite well with much labour in the end, and after all the trouble; the camera support is still pretty bad. But hopefully someone will get it working well soon or comment here and it'll be dandy. (Tried GCam variants - 3 lenses max + crashing, incorrect behavior, and ANXCamera - Boot loop).

Here are the general steps I took to getting it all working. I highly recommend using a Micro SD card, and avoiding any screen locks/pins until you are certifying the phone otherwise the recovery is encrypted making things more difficult if you mess up. It's also wise to have everything on both the internal SD Card and Micro SD card so you can avoid extra rebooting and trying to copy stuff in or getting frustrated by the circus that will ensue. I also recommend rebooting often and making sure whatever step you just took actually took effect.

Steps (cliff notes):
- Xiaomi Unlock (Official Bootloader Unlock, had a wait 168hrs - 1 week)
- Orange Fox Recovery Flash (Recovery Rom, replaces TWRP, Flashed via adb/fastboot)
- PixyOS Flash (System Rom via OrangeFox)
- Magisk (Rooting, using the zip in Recovery, the boot.img method didn't work for me)
- Magisk Manager (APK)
- Certified Google Device (by copying the sqlite db file gservices.db to my pc and then using DBBrowser for SQLite to inspect the main table and searching for android_id, then entering it on the google register site - this one will help stop the spam, alternatively you could do this later after you install SQLite3 binary on the device itself and executing the sql yourself in a terminal, you may also have to repeat this if you do it early at this step as once you do the device spoofing stuff it'll need recertification).
- Magisk Hide (Root Hiding, App renaming, Be patient, Blacklist)
- EdXposed Manager (APK, Verify Isolation and Blacklist)
- Riru/EdXposed (Storage Isolation, Sandhook variants, Blacklist)
- Magisk Plugin - Property config property spoofing (Faking /Spoofing phone model/manufacturer for certification, I used Xiaomi Mi 9T Pro for my Poco X3 NFC Global)
- Sqlite3 + GPaySqlFix (Play Protect + GPay, verify, clear data, then sql fix via magisk, add card, reboot, perfectly sequence steps and prechecks were critical, this method can also be used to get any restrictive government/travel apps and banking apps to work as well).
- I did some fixes for Netflix HD and got the APK seperately, but maybe didn't have to do any of that in retrospect.
- Camera replacement, GCam/PixelCamX (recommended with pixel 3.0 legion xml)/ANX Camera

Obviously even each of these steps is oversimplified here, and I used many tutorials/videos etc to figure out exactly how to do each one and messed up a few times along the way. Any single tutorial I found was completely insufficient and understates how complicated everything is to get this working, so much that I kind of regret unlocking in the first place since I bought my phone for a better camera and the camera now is the worst supported feature.

Here are some of the guides/useful links I used:

https://github.com/ElderDrivers/EdXposed/issues/665 (this one was critical for Riru/EdXposed, using latest riru and canary edxposed)

HTH, any improvements/suggestions appreciated.

Also is there anyway to backup the whole thing (perhaps in recovery) without removing the locks that keep the GPay contactless stuff working? If I remove the pin to decrypt for recovery, we lose the gpay stuff right. This makes it so hard to really try anything out for the final touches, like camera, without possibly having to start from scratch every time with a half assed or no backup.

I understand backup isnt supported yet though, can certainly wait.

While I'm at it, I'd also point out that there are several features from MiUI or other custom roms I missed quickly.
- Auto unlocking at entering 4 digits of pin, the extra steps are just so painful.
- Notification LED turning on when plugging in the charger (I wanna turn it off, but keep the LED for notifications only, LED lights up my room when its on charger and im trying to sleep)
- The bluetooth and Wifi/Mobile Data seem to be stable enough but havent long term tested even though I noticed some were having issues.
- Obviously the camera needs a lot of work and is understated how poorly supported it is.
- The thing that also might not be obvious for newcomers is that whilst we may eventually get a good camera app, using third party apps to take photos like discord/snow/instagram or something is still going to poorly support the o/s level camera. What a let down.
- Some report Google Maps doesnt work but it does for me.
- Some report Headphone jack doesnt work but it does for me.
 
Last edited:
  • Like
Reactions: vladmx and wayne.22

MJ73

New member
Jan 4, 2021
2
0
I feel you man. I think thats normal, you need to take some steps to "certify" the phone to Google. Until then it will spam you and you cannot use GPay etc. I feel like there was no guides that I could dig up that covered the entire end to end process, most cover a single tiny aspect making it very difficult for any newcomers...

Thank you so much for the information. That seems like a lot of work.
I bought poco x3 as my primary phone so I'll go back to stock rom for now until I figure out how to handle the extra steps.
 

hamrazali

Member
Dec 24, 2013
5
0
Changelog: (16/11/2020)
• Go OFFICIAL!
• Initial Support for Karna
• Add back custom audio policy
• Add Notification Led
• Add AOSP RCS packages
• Fixed headphone jack
• Fixed yellow tint
• Fixed Notification Led
• Fixed Recorder
• Disable few debug services
• Disable smart fps
• Disable DisplayFeatureHal in vendor
• Update fp from sunfish November
How to fix headphone issue.. I please help
 

Anoses

Member
Jun 10, 2015
17
0
are there any mirror sites because every time i try to download it gives me an error, i already tried different browsers
 

Attachments

  • Unbenannt.PNG
    Unbenannt.PNG
    62.9 KB · Views: 39

Top Liked Posts

  • There are no posts matching your filters.
  • 7
    23/012021

    Changelog:

    • Enforcing
    • Treewide cleanup
    • Fixed video recording timestamp
    • Fixed vowifi with enforcing selinux
    • Fixed broken FM radio
    • Fixed audio recording issues on surya
    • Fixed google restore during setup
    • Fixed Ok Google detection
    • Switch to 90Hz refresh rate by default
    • Dynamically set power profile according to device model
    • Update power HAL
    • Performance/Optimization related props
    • Added clear speaker option
    • Refine parts with updated icons and strings
    • Doze functionality improvements
    • More translations dump for parts
    • Upstream blobs from MIUI V12.0.8.0.QJGINXM
    • Add proper notch masking overlay to hide camera cutout
    • Fix crackling noise while playing some sounds
    • Adjust brightness values
    • Touch response optimizations
    • Increased stune boost to 10 (minor performance improvement)
    • Many other Misc fixes/improvements
    4
    pixys_banner.png


    Code:
    #include <std_disclaimer.h>
    /*
    * Your warranty is... still valid?
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */


    about.png

    Pixys is a butter smooth Android aftermarket firmware. We handpicked the best features around and are adding our own juice into it.
    Get ready to taste the unique features it brings with itself.
    We aim to deliver an experience with original ideas and features along with the useful things the community is accustomed to.

    team.png

    @Subinsmani
    @rahul9999
    @@ki
    @Shreejoy Dash
    @kvijaya
    @AxelBlaz3
    @Psycho-Mods
    @aswin_a_s
    @gero
    @melvingarcia

    donation.png
    ]

    Support Us if you like our work

    [SIZE=+1]Got an issue or suggestion? Reach us at[/SIZE]
    Telegram: https://telegram.me/pixysos_chat

    features.png


    Coming soon :)

    source.png

    Pixys: PixysOS
    Pixys Device Sources: PixysOSDevices

    install.png

    - Backup your personal data (Important)
    - Download the ROM.
    - Boot to recovery (TWRP recommended).
    - Flash the ROM.
    - Format Data.
    - Reboot your device.

    The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
    The root solution should be flashed together with every update (= ROM Update)


    Currently Supported Root Solutions:

    Magisk stable
    Magisk versions higher than 14.0 doesn't require flash on every dirty flash depending on the device, some devices need you to flash it every time, unless your maintainer says otherwise it should be fine

    download.png

    ROM: Unified Builds

    known_issues.png

    - Lets us know if any.

    credits.png


    - Google for AOSP
    - AOSCP
    - Dirty Unicorns
    - Pixel experience
    - AOSP extended
    - LineageOS
    - Nitrogen Os
    - Bootleggers Rom
    - Superior OS
    - AICP & POSP Team for thread template idea
    - Also many pro devlopers who all help us to bring this rom to you..
    - Please let us know if we forgot to mention your name in credits..​

    XDA:DevDB Information
    PixysOS, ROM for the Xiaomi Poco X3 NFC

    Contributors
    mahajant99
    Source Code: https://github.com/mahajant99/kernel_xiaomi_surya

    ROM OS Version: Android 11
    ROM Kernel: Linux 4.x
    Based On: AOSP

    Version Information
    Status:
    Stable

    Created 2020-10-16
    Last Updated 2020-12-14
    3
    14/12/2020

    Changelog:

    • Fixed 5Ghz WiFi
    • Fixed HDR
    • Add FM support
    • Add postprocessing blobs
    • Add Display Hardware blobs
    • Add missing stuff for WFD
    • Few minor changes
    • Update fp from sunfish December
    3
    22/12/2020

    Changelog:

    • Address various sepolicy denials
    • Define board as QCOM
    • Update graphics prop
    • Fixed Headphone volume buttons
    • Other Minor changes
    2
    14/04/2021

    Changelog:

    • Updated sunfish fingerprint to April
    • Misc optimizations and stability fixes