I hope moderators will not block me for commenting a lot in this thread....it is suggested you always use latest firmware( you can use any of them)....yes a little bit it is compulsory to flash magisk at the end after flashing gapps etc rest steps shared in my previous posts.I went back to oxygen os 10.3.6 to try to install version 11 Should I use 10.3.6 or 10.3.7 to install this 11 version ? Is the way of installing version 11 different from version 10 ?
I hope moderators will not block me for commenting a lot in this thread....it is suggested you always use latest firmware( you can use any of them)....yes a little bit it is compulsory to flash magisk at the end after flashing gapps etc rest steps shared in my previous posts.
You didn't flash the magisk file at the end and didn't boot up the OOS after flashing it twice....leave it Please read the instruction carefully from start , use the latest twrp I recommendi am in 10.3.7 then flash 10.3.7 flash twrp recovery 3.4.3 reboot into fash recovery 10.3.7 1 again and install reboot twrp recovery into siberia flash recovery ROM clear data and davik cache flash twrp recovery rebooted into recovery and flash gaps I could not boot into the system
Thank you very much I will try againYou didn't flash the magisk file at the end and didn't boot up the OOS after flashing it twice....leave it Please read the instruction carefully from start , use the latest twrp I recommend
First format data in twrp and reboot to twrp again then Flash 10.3.7.zip then twrp reboot to recovery
Again flash 10.3.7.zip then twrp after that BOOT TO SYSTEM FINISH THE INITIAL SETUP OF OOS
Again reboot to twrp recovery and flash latest syberia.zip then (NO NEED TO FLASH TWRP AGAIN ITS ALREADY INCLUDED IN ROM).....reboot to recovery clear only dalvik cache...flash nikgapps basic (2020-12-14) after that FLASH MAGISK 21.2 VERSION THEN important step CLEAR ONLY DATA IN TWRP
Reboot system you are good to go..(ALL THE STEPS ARE COMPULSORY)
PM me if you have any confusion I think I am spamming this thread right now
I did a dirty flash on 2020-12-09 buildNew build is up
- Upstream to 4.9.249
- Merged LE.UM.3.2.2.r1-08100-sdm845.0 caf tag
- Scheduler improvements from android-mainline
- Fixed edge lights when sensitive notification content hidden
- Fixed QS overlaps in landscape mode
- Fixed custom statusbar icon update on lockscreen
- Fixed some theming issues
- Added Mallow shape icon mask
- Allow to hide arrow for back gesture
- Reset battery stats option
- Smart Charging
- Allow tethering to use VPN upstreams option
- Lockscreen media art blur configuration
- Fixed issue when media art doesn't shows when facelock keyguard baypass enabled
- Fixed "Share" icon in recents when custom icon pack is set
- Added "Delete" button in screenrecord notification
- Enabled privacy hub
- FOD improvements
- ART improvements
- Merged LA.QSSI.11.0.r1-08800-qssi.0 caf tag into telephony
- Other improvements and fixes under the hood
- First build without prebuilt vendor!
- Updated Adreno graphics blobs from LA.UM.9.8.r1-02700-SDM710.0
- Updated CNE/DPM blobs from LA.UM.9.8.r1-02700-SDM710.0
- Updated RenderScript blobs drom Crosshatch RQ1A.201205.003
- Updated Vulkan blobs from LA.UM.9.8.r1-02700-SDM710.0
- Updated GPS stack from LA.UM.9.8.r1-02700-SDM710.0
- Updated IMS stack from LA.UM.9.8.r1-02700-SDM710.0
- Updated Media stack from LA.UM.9.8.r1-02700-SDM710.0
- Added Codec2 Media HAL from crosshatch RQ1A.201205.003
- Updated QMI/RIL from from LA.UM.9.8.r1-02700-SDM710.0
- Added QTI WFD stack from from LA.UM.9.8.r1-02700-SDM710.0
- Updated QTI AV enhancements blobs from LA.QSSI.11.0.r1-08400-qssi.0.
- Switch to Codec2 instead of OMX when it possible (perfectly smooth 60fps video in stock cam)
- Selinux enforcing
- Prebuilt TWRP updated to 3.4.0-11
- F2FS support without patches
- Partially fixed Google Assistant voice match (doesn't work when screen is off)
As far as it first build with OSS vendor some issues could be present for now. And this build doesn't published via OTA for now.
Advice: make backup of your vendor partition in TWRP before this build installing, otherwise other custom ROMs and previous syberia builds will be incompatible with this vendor.
I just flashed this Rom without magisk. I didn't found any problems yet. How ever sending messages through FB Messenger FailsI did a dirty flash on 2020-12-09 build
once finisched it boot on recovery, but flashing the "noencrypt" zip file the rom has loaded propertly
any other issue
I'm having similar issues, i think its related to gapps. They aren't getting recognized for some reason.Hello!
I used this this rom (1230 vesion) and I found some bugs:
When I connect to car with USB cable (Android Auto) crash the phone totally. No response, no anything.
Audio sometimes not work since boot (no jack, no speaker).
Vowifi Logo apper, but Vowifi is not active.
Can't connect my Mi Band4 with smart lock.
When i go to settings in GBoard, it FC.
Youtube Vanced (root version) not recognize google services.