[ROM][11][OnePlus8T] PixelExperience [AOSP]

Search This thread

titi2940

New member
Apr 24, 2021
1
0
Hello, I would like to ask you some questions about installing the image of the Pixel Experience, Magisk and fingerprint.

I apologize in advance for my approximate English.

1- Having followed the installation, and several tests of the first procedure of the official page document, ie:
- Copy of Recovery (which works well)
- Copy of partitions (which has functioned)
- Copy of the .zip file of Pixel Experience (which did not work, with the command adb sideload <filename> .zip ->
Mapping Update without arrival as said in the procedure at 47%)

2- I have resolved to use payload_dumper and reuse the procedure taken on the forum: ###########################################
fastboot -W
fastboot Flash Recovery Recovery.img
fastboot reboot fastboot
fastboot Flash boot boot.img
fastboot Flash dtbo dtbo.img
fastBoot --disable-verity Flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot flash system system.img
fastboot flash system_ext system_ext.img
fastboot flash product product.img
fastboot Flash odm odm.img
fastboot flash vendor vendor.img
fastboot reboot
###########################################
-> who worked well.

3- My question is: what to do in a new update of the Pixel Experience (for the month of May 2021), it must be started on point number 2-?
Will there be possibility to update via the system (Settings tab -> Systems -> System Update) ...

4- I used a procedure for the installation of magisk (ie recovery of the boot.img of the Pixel Experience system of 2021_04_19 and the Magisk archive to put at the root of the Android system) and via the Magisk Manager to generate the magisk.img patch and install it.
Is there a relation between the new update of the Pixel Experience system (example: for May 2021) and Magisk concerning the procedure of point number 4- (concerning the recovery of boot.img that will not be the Even)
Will it always have to pass this way to maintain the rooting of the phone?

5 - I have some problems with my fingerprint who in most cases tells me that my fingerprint is not recognized and rarely it recognizes it. (I add the same finger several times), but the problem of recognition of the footprint comes back. (I have placed a protection screen, and my fingers are clean, no dalsure), would you have encountered the same problems?

I thank you all for your questions and answers on this forum that helped me a lot.
Well to you,
 
Last edited:

danyeow

New member
Aug 20, 2014
1
0
Hi all, I got stucked at flashing product with error not enough space to resize partition. Was wondering if anyone have any suggestions or how to solve this please? Thanks.
 

nuwan32

Senior Member
May 8, 2011
1,184
251
OnePlus 8T
So I really wanted to flash pixelexperience. followed the guide but when i get to the part to flash rom, i sideload the rom zip and kept getting this error: error in /sideload/package.zip

It just wouldnt flash. ended up flashing lineage os and it worked.. even tried flashing pixelexperience rom through lineage recovery, didnt work.
 

Point9

New member
Apr 30, 2021
1
0
Ummm.. can this rom flash on a China Retail version of 8T? I'm following the install guide on the offical website, but I getting a “Error applying update: 7 (ErrorCode::kInstallDeviceOpenError) E:Error in /sideload/package.zip (status 1)"

device's product_name is "kona" rather than "kebab", model number is "KB2000"

sorry for my bad english.
 

byJacco

Member
Dec 28, 2018
22
7
Samsung Galaxy S20
Ummm.. can this rom flash on a China Retail version of 8T? I'm following the install guide on the offical website, but I getting a “Error applying update: 7 (ErrorCode::kInstallDeviceOpenError) E:Error in /sideload/package.zip (status 1)"

device's product_name is "kona" rather than "kebab", model number is "KB2000"

sorry for my bad english.

You need to put the zip file in the same folder as where the adb and fastboot is located. Than it will work :)
 
  • Like
Reactions: vthe

GreggHo

New member
Apr 20, 2021
3
3
Ummm.. can this rom flash on a China Retail version of 8T? I'm following the install guide on the offical website, but I getting a “Error applying update: 7 (ErrorCode::kInstallDeviceOpenError) E:Error in /sideload/package.zip (status 1)"

device's product_name is "kona" rather than "kebab", model number is "KB2000"

sorry for my bad english.
Do not flash by sideload ,using payload dumper instead.Mine is KB2000 too
 
  • Like
Reactions: lixindiyi and vthe

by_BenjamiN

Senior Member
Jan 9, 2018
94
12
this is Rom really awesome. There are a few problems. Fingerprint does not work in night light. Screen brightness is inconsistent. Google photos get stuck with videos.
 
Last edited:

vthe

New member
May 8, 2021
1
0
I found a problem about the "Alert slider". When I turned the phone into silent mode (most upper setting), although the phone displayed the mute icon, the actual volume did not decrease to 0.
 

DECS.

Member
Jan 22, 2019
7
0
Can't you set the FOD icon to disappear from AOD after a certain period of time? Sorry for not speaking english ^>^
 

Honkster01

Member
Jan 10, 2019
12
1
OnePlus 9
I made a simple flasher for users who wants to flash this rom or (should work with other ROMs) easier than ever. windows 8 to 10 are supported.
Just download the DoubleClickFlasher and read the README instructions...
Note: Your device should be unlocked before flashing custom ROMs.
Still no luck here, flasher won´t install rom on my 8t (failed: remote partition not found)
 

Nixsuki

Senior Member
Jul 25, 2016
370
540
Pasig City
OnePlus 8T
Still no luck here, flasher won´t install rom on my 8t (failed: remote partition not found)
Reflash via MSM to the latest OOS and unlock then follow the instructions 👇

DoubleClickFlasher by EmperorEye1993
• Includes ROM Flasher batch file inside.
• Includes Latest Payload Dumper inside
• Read the README file for instructions.
 

Attachments

  • DoubleClickFlasher-OP8Series.zip
    6.4 MB · Views: 109
  • Like
Reactions: sandix

Smallsmx3

Senior Member
Jul 28, 2010
4,138
781
Tried flashing manually. I was getting a partition error. I managed to get through the process but no luck. Now that I think about it I don't think recovery flashed properly either
 

Smallsmx3

Senior Member
Jul 28, 2010
4,138
781
Ok, I got recovery flashed but when I'm in the PE recovery in fastbootd any time it writes to the device it fails (no file or directory) if I go to the bootloader then everything is a success until I get to product.img it fails (no such partition) I followed everything to the T. I even watched a video of someone flashing it and I don't have the same experience.
 

Smallsmx3

Senior Member
Jul 28, 2010
4,138
781
Also the command --disable-verity does not work for me. If I remove that phrase vbmeta flashes just fine
 

Smallsmx3

Senior Member
Jul 28, 2010
4,138
781
Stupid me. I was flashing in power shell. I've always flashed in power shell with no issues. After failing over and over I swapped over to command prompt and got it all sorted out!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 48

    NFjZzFl.png

    PixelExperience for OnePlus8T[kebab]

    What is this?
    PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)

    Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device

    Based on Android 11



    Whats working?
    Wi-Fi
    RIL
    Mobile data
    GPS
    Camera
    Flashlight
    Camcorder
    Bluetooth
    FM radio
    Fingerprint reader
    Face unlock
    NFC
    Lights
    Sound/vibration


    Known issues
    Nothing yet
    You tell me

    DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
    Download from PixelExperience website


    Donate
    [*]UPI-ID:- [email protected]
    [*]Paypal:- paypal.me/KakatkarAkshay


    14
    New instructions to flash - NOOB Friendly:


    1. Download the latest build
    2. Download the latest platform tools, if you haven't already: https://developer.android.com/studio/releases/platform-tools
    3. Extract the adb and fastboot drivers zip and add that folder to path (if you don't know how to add a path, google it)
    4. Enable USB debugging via developer options on your phone and after that connect your phone via USB to PC
    5. Extract only the recovery.img file from the ROM zip
    6. Open a command prompt window where the extracted recovery.img is present, and enter the following one by one:

    Code:
    adb reboot bootloader
    fastboot boot recovery.img

    7.From the phone's recovery page, do the following:

    Factory reset -> Format data/factory reset -> Format data.

    8. Go back to recovery page from clicking back.

    9. Select "Apply Update -> Apply from ADB"

    10. From the command window already opened, sideload the rom using:
    Code:
    adb sideload <ROM>.zip
    (Replace <ROM> with actual ROM file name)

    11. If you want to root, after first boot, reboot to recovery again, select "Apply Update -> Apply from ADB"

    12. Connect your phone to PC, open a command prompt window where Magisk zip is located, execute:
    Code:
    adb sideload <MagiskFileName>.zip
    (Replace <MagiskFileName> with actual file name)


    For updating, open a command prompt window where the new ROM zip is present, execute:
    Code:
    fastboot reboot recovery
    , then follow steps 9-12.

    Old instructions:

    @GDZechariah @Moffei97 @firdoshakir @matteosaeed @manhong2112

    The zip is flashable, but without the twrp, you can't flash that way.

    Instructions to flash (noob friendly):

    YOUR BOOTLOADER SHOULD BE UNLOCKED

    1. Flash OOS 11 on both slots (Use local upgrade option/flash via fastbootd).

    2. Check using this app if u have OOS on slot_b:-
    https://play.google.com/store/apps/details?id=flar2.devcheck

    1-2. (ALTERNATE WAY) - Flash OOS to slot_b via fastbootd and set the active partition as slot_b.

    3. Download the latest Pixel experience ROM.

    4. Download and install Python3 on your PC (TICK THE ADD PYTHON TO PATH OPTION):-
    https://www.python.org/downloads/

    5. Download payload dumper and extract its zip:-
    https://androidfilehost.com/?fid=818070582850510260

    6. The Pixel Experience ROM should be on ur PC.

    7. Now extract the Pixel Experience ROM.

    8. Put the "payload.bin" file from the extracted ROM file to payload dumper/payload_input

    9. Run payload dumper.exe

    10. Wait for all files to be extracted.

    11. Now install adb and fastboot drivers (Skip to step 13, if you already have it):-
    https://developer.android.com/studio/releases/platform-tools

    12. Extract the adb and fastboot drivers zip and add that folder to path (if you don't know how to add a path, google it).

    13. Enable USB debugging via developer options on your phone and after that connect your phone via USB to PC.

    14. Now go to payload dumper/ payload_output folder and open a command window there.

    15. On the command window, type the following commands one by one:

    Code:
    adb reboot bootloader
    fastboot -w
    fastboot flash recovery recovery.img
    fastboot reboot fastboot
    fastboot flash boot boot.img
    fastboot flash dtbo dtbo.img
    fastboot --disable-verity flash vbmeta vbmeta.img
    fastboot --disable-verity flash vbmeta_system vbmeta_system.img
    fastboot flash system system.img
    fastboot flash system_ext system_ext.img
    fastboot flash product product.img
    fastboot flash odm odm.img
    fastboot flash vendor vendor.img
    fastboot reboot

    16. Done! Enjoy Pixel experience ROM

    For updating subsequent builds of Pixel Experience ROM, download the latest build, follow steps 7-10, 14-15. But in step 15, skip the "fastboot -w" command.

    Alternate Platform Generic payload dumper: https://github.com/theincognito-inc/payload_extractor.git
    12
    New Official Build up

    Changelog:

    - December security patch
    - Added Alert slider customization
    - Added OOS White fod icon
    - Updated Gcam
    - Fixed slow charge message on lock screen
    - Fixed Screen off ok google
    - Fixed screen color issues
    - Added DC Dim
    6
    Just wanted to take a moment to give a shout out to chandra1.jd what a great guy and friend to bounce ideas off of. Normally devs are alone in their work, but this guy is just awesome.
    5
    Flashed. Working fine. Fingerprint is working, included Gcam works well.