[ROM][11][UNOFFICAL][tucana] LineageOS 18.1

Search This thread

parser

Senior Member
Feb 19, 2011
594
155
Mersin
I released hopefully the last testing build. If there are no major bugs I will release the ROM but without OTA. Couldn't get it working reliable.
Thx for your and @Chemuski1 hard work man. You have mentioned a couple posts earlier that you have activated 3A @ 5V and not 2A @ 5V charging.

I would like to ask what is hindering you from activating 20w and above charging since the phone supports it. Is it a xiaomi specific thing that we can't use in custom Roms? Can we, maybe, see it in your Rom in the future?

Just an informative question, curious about it.
 

alibei

Senior Member
  • Jan 1, 2017
    231
    355
    21
    Deggendorf
    Thx for your and @Chemuski1 hard work man. You have mentioned a couple posts earlier that you have activated 3A @ 5V and not 2A @ 5V charging.

    I would like to ask what is hindering you from activating 20w and above charging since the phone supports it. Is it a xiaomi specific thing that we can't use in custom Roms? Can we, maybe, see it in your Rom in the future?

    Just an informative question, curious about it.
    Because I cannot manually set the charging voltage. As I can read on the charger it only supports [email protected] If I find a solution to get 9V, the 27w charging would be possible
     
    Last edited:

    WckedCode

    Member
    Jun 14, 2019
    19
    5
    Is anyone having issues with the GPS service in general? All the apps that use it can't really seem to find my location.

    PS: example applications: waze, google maps, uber, etc...
     

    lemach

    Senior Member
    Feb 14, 2012
    303
    69
    Thanks for your work!

    format dat or wipe data? i would prefer not have to delete files on my internal memory like photo or videos, and format data do it... any bypass?

    Thanks again.
     

    0201m

    Member
    Dec 14, 2012
    11
    2
    Bavaria, Germany
    Got a problem with the wifi on this build. Clean flashed the rom. Wifi wont turn on and locks um System-UI or Settings app.
    Logcat is from when i flick the wifi switch in the settings app. Already tried reinstalling and installing only firmware/full MIUI before flash

    Code:
    E [[email protected]][0x18e721ff7][12:45:54.905992] wlan: [804:E:QDF] cds_get_context: 1480: Module ID 51 context is Null

    Seems like it has some trouble with the wifi module perhpas, im not sure. If you need more just hit me up

     

    alibei

    Senior Member
  • Jan 1, 2017
    231
    355
    21
    Deggendorf
    Got a problem with the wifi on this build. Clean flashed the rom. Wifi wont turn on and locks um System-UI or Settings app.
    Logcat is from when i flick the wifi switch in the settings app. Already tried reinstalling and installing only firmware/full MIUI before flash

    Code:
    E [[email protected]][0x18e721ff7][12:45:54.905992] wlan: [804:E:QDF] cds_get_context: 1480: Module ID 51 context is Null

    Seems like it has some trouble with the wifi module perhpas, im not sure. If you need more just hit me up

    Did you flash a fastboot miui build? If not please try this
     

    alibei

    Senior Member
  • Jan 1, 2017
    231
    355
    21
    Deggendorf
    Gonna try asap. Flashed the zip rom from your install guide

    This should do right? Cant find a China fastboot
    Yes flash this but don't forget to flash the fw for lineage

    The fastboot method is only needed if you have a corrupted persist. With a corrupted persist wifi does not work
     

    0201m

    Member
    Dec 14, 2012
    11
    2
    Bavaria, Germany
    Yes flash this but don't forget to flash the fw for lineage

    The fastboot method is only needed if you have a corrupted persist. With a corrupted persist wifi does not work
    Ok i will give it a try, although i didnt have problems with Ressurection before, or could that be bc of it being precompiled?

    So i will flash fastboot first and then do the install steps as before (flash FW, wiping, format...)
     

    Top Liked Posts

    • 1
      Well, I'm still trying to make the "OK Google" feature work in the Google Search App. I tried to systemize Google Search App using Systemizer Magisk Module, with no success. When I type the option to list installed apps, nothing shows up. I tried the option to systemize the app using the label (com.google.android.googlequicksearchbox), but all I got is an error message. I would be thankful if someone could help me.

      If I flash the full GApps package via TWRP, will I end up with a bootloop or something?
      Just a quick update: I managed to install the full version of NikGapps, making the suggested modifications in the NikGapps.config file. The installation was sucessfull, but this somehow broke the navigation bar. The "recent apps" button no longer works and I can't even enable gesture navigation. After this I tried to perform a clean flash and the navbar came back to normal. However, flashing the full GApps again caused the same issue. So I believe something in the full GApps package is the culprit.
    • 8
      New update is out. For changes please see the changelog

      For users with the Wifi problem:
      - Install the update as usual
      - Reboot to recovery or go back
      - Mount persist
      - Click on Advanced -> File Manager
      - Go to persist
      - Click on wlan_mac.bin
      - Click on delete
      - Swipe to confirm
      - Reboot
      8
      New ROM is released please look at the installation instructions carefully. This release uses a custom kernel and source build vendor
      7
      New update is out for changes please see the changelog
      6
      I released hopefully the last testing build. If there are no major bugs I will release the ROM but without OTA. Couldn't get it working reliable.
      5
      I found a way to improve the fod speed and detection by quite a lot. But this broke the FOD in AOD. I try to fix this.
      FOD in AOD is now working
    • 20
      yUIn6TF.png


      Code:
      LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device.
      
      LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
      
      Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.


      Working:

      • AOD
      • Audio
      • Boot
      • Bluetooth
      • Camera
      • Display
      • Flash
      • FOD
      • GPS
      • Hotspot
      • Quick charge (almost 30W)
      • RIL
      • SafteyNet gets bypassed without using magisk
      • Selinux is strict (not permissive)
      • Sensors
      • Video Playback
      • Widevine L1 (for example 1080p Netflix)
      • Wifi
      • Wifi Display



      Bugs so far:

      • Gestures are buggy
      • Offline charging does charge for about 1-2 min. After this time the device does start automatically
      • AOD has a unlock issue (blackscreen) if AntiFlicker is enabled
      • NFC: Nearby share does work but android beam does not work. It is
        deprecated since A10. I don't know if I will get it ever
        working again
      • If you find one take a logcat when the error occurs. If you don't know how to take a logcat take a look here.


      Changelog:
      • You can find the changelog here
      13
      The next update is based on prebuilt android 11 kernel and vendor😊. I will release it in the next few days.
      11
      Just as a status update for you. The stability issue is now fixed. The FOD is now flicker free. Only colors getting slightly distorted when you press the FOD. This is because the device uses now dc dimming to dim down around the fingerprint reader. Also, FOD does not work with AOD (fingerprint reader brightness does not go up), have to look into this more. Widevine L1 is not working, only L3 (working on this). Also, I'm working on getting SafteyNet bypassed without using Magisk.
      9
      My device is now unbricked. Had to get flashed via edl
      9
      The new version is almost ready everything is working except the hbm mode from the fod (working on it). The batterylife is good too. Maybe you will get a selinux strict build.

      Now comes a question. Should I build ForkLineage instead of Lineage? It offers faceunlock, extended screenshot and some minor changes but still being lineage.
      Also if you wish, I can provide OTA.
      The hbm mode for the fod is now fixed. And the fod is a lot faster now
    Our Apps
    Get our official app!
    The best way to access XDA on your phone
    Nav Gestures
    Add swipe gestures to any Android
    One Handed Mode
    Eases uses one hand with your phone