[ROM][11][UNOFFICIAL][TREBLE][Garlic]Crdroid 7.16

[pbteja]

Build type: crDroid Unofficial Treble ROM​

Disclaimer:
!!! Whatever you do, it is at your own risk !!!
I am not responsible for unreported Bugs.
*************************************************************************************************************


Introduction:

This is the unofficial crDroid thread for the YU Yureka Black, codename garlic.

This should work on all Tinno p7201 clones as well.

Status: Enforcing unsigned userdebug build.
Working: Bluetooth, Calls, Bearer services, Wifi, Poweroffalarm, Dt2w, GPS, Elan fp, FD Encryption.
How to install:

• Finish setting up treble.
• Boot the newest TWRP .img from the Official TWRP Project Site.
• Flash ROM, flash GApps (Optional)
• Reboot

Download:

Rom-Builddate	sha256sum	Not working maybe	Changes
crDroidAndroid-11.0-20220323-garlic-v7.16	703229f1a64a8d098d18914084a9ab3eee49ca62bb26cf862dc898e54296a2e4	Googlecast and Volte not working

Kernel Source : Click Here
Device Tree : Click Here
Common Tree : Click Here

Special Thanks to

• crDroid team

Information
crDroid 7.16 for YU Yureka Black, ROM for the Yu Yureka Black

Contributors
@pbteja
Source Code: https://github.com/crdroidandroid

ROM OS Version: Android 11
ROM Firmware Required: N firmware
Based On: crDroid

Version Information
Status: Stable

Created 2022-03-24
Last Updated 2022-03-24

 

[saurabhbm]

Thanks for effort.

Previously I was on StagOS 11 R3, Andoid-N firmware.
Did wipe of everything including data partition.

Reboot after installation goes back to recovery.
dmesg log attached.

Any idea what did I miss?

 

[kozlu14]

İnstall crdoid zip and wipe system vendor cache data and format data reboot recovery flash crdoid zip

 

[saurabhbm]

İnstall crdoid zip and wipe system vendor cache data and format data reboot recovery flash crdoid zip

Tried clean flash with new and old recovery.
Also tried dirty flash on StagOS 11.R3, still doesn't work.

With old TWRP and PBRP, after patching vendor image phone gets into hung state with sold light for few sends and then probing lights for few seconds alternately.
With latest TWRP, no errors but reboots into recovery after few seconds.

Fortunately StagOS 11.R3 still gets installed fine, battery life is poor though.

Anything to be done specifically to get crDroid working?
I tried undo-redo treble conversion, still same behavior.

 

[kozlu14]

İnstall los18.1 qfil image and boot TWRP format data and wipe cache system vendor and try install crdoid rom

 

[saurabhbm]

With last attemp device didn't came out of EDL mode with notification light staying red, I had to let device run of battery.
For pleasant surprise, device booted to crDroid and is up till now without glitches.

Is there way to upgrade this to crDroid 9? I'll like to give it a try.
@pbteja you still have sources? Any newbie guide to build and troubleshoot will help.

 

[kozlu14]

Updated crDroid 7.16 to 7.31 post https://xdaforums.com/t/rom-android-11-0-garlic-treble-crdroid-v7-31-unofficial-08-07.4603747/