• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][11March][GNU/Linux] Sailfish OS 2.0.5.6 -kenzo

Yu need this new OS??


  • Total voters
    184
  • Poll closed .
Search This thread

Plamb1r

Senior Member
Oct 23, 2014
595
1,003
Poltawa
SailfishOS_logo_large.png



Disclaimer
Code:
WARNING: "Modifying or replacing your device’s software may void your device’s warranty, lead to data loss,
hair loss, financial loss, privacy loss, security breaches, or other damage,
and therefore must be done entirely at your own risk. No one affiliated
with this project is responsible for your actions but yourself. Good luck."

Hello and good news everybody!
Sailfish OS on RN3P, this is a community port! support is now possible! Calls, Wifi, data, sensors, SMS, Camera (video recording is broken) are working fine.
Bluetooth is a little buggy but works.

We are also working to rebase onto CM 14.1 for more goodies; you can help us by testing Backup to cloud (and restore) , as this will be needed during the CM reflash.

Status, download, installation...
Sailfish OS is a GNU/Linux based mobile operating system, which is gesture-driven for the ease of use. It runs natively as glibc (not Android's bionic), has bash and busybox (not toolbox), uses Qt for UX, and other opensource projects in its middleware -- which basically is just like a Linux on your desktop, and runs native Qt apps and cmdline apps, but doesn't run Android apps (check for Android-in-a-Window above if you need them).
And everything else you need to know:

What's working :

  • Boots
  • RIL (Calls, SMS, Data)
  • Wi-Fi
  • Bluetooth
  • Camera except video record
  • Video Playback
  • Audio
  • Sensors
  • LED
  • GPS

Known issues:

  • Hotspot and Bluetooth are a little buggy (works though)
  • Camcorder
  • VoLTE
  • Hardware keys
  • Fingerprint
  • Flash

How to install:
1. Make sure you have unlocked bootloader and TWRP installed. (recommended ZCX recovery,)
2. Wipe Dalvik, System, Data, Internal Storage, Cache
3. flash cm-13/lineage-13
4. Format Data (*NOT wipe*)
5. flash sailfishOS
6. reboot

NOTE:
1. For Bluetooth to work, make sure you have it turned ON before rebooting.
2. Wifi hotspot may not turn on at first attempt, try turning it off and then on, it should work.
3. After using hotspot, it might take a while for WLAN settings to appear.
4. NO VoLTE, FM radio support.
5. Did not test SIM 2.
6. Built-in browser doesn't work, use Web Pirate from Jolla Store instead

Thanks to @Plamb1r and the Sailfish OS community for their help


XDA:DevDB Information
[ROM][GNU/Linux] Sailfish OS 2.0.5.6, ROM for the Xiaomi Redmi Note 3

Contributors
Plamb1r, akhilkalwakurthy
Source Code: https://github.com/Sailfish-kenzo

ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: cm13 is mandatory
Based On: cm13

Version Information
Status: Testing
Current Beta Version: 2.0.5.6-debug
Beta Release Date: 2017-03-11

Created 2017-03-11
Last Updated 2017-03-12
 

[email protected]

Senior Member
Nov 2, 2016
525
175
Not now
Thanks for the Linux {uniX}

you should remove status of testing to beta


working good lokks so gooood
mtp works fine. calling works sms works.data also works. file transfer works.
but faced one issue while playing ytplayer (youtube video player) it is lagging also tried to change quality to 360 p doesnt help
for me it has become daily driver

just one help any sucsses while installing whatsapp and sf droid pls quote me
installed it . if anyone facing problem of wifi sim card detection then just install cm 13 radios by balika
 
Last edited:

Kuato

Senior Member
Sep 30, 2012
863
392
nowhere
Yay!!! Another GNU/LINUX OS !!! Gud job mates!!! Downloading now!! I hope not only sailfish but Ubuntu Touch also for our devices!! :laugh: :victory: :good:
 
  • Like
Reactions: Plamb1r

akhilkalwakurthy

Senior Member
May 7, 2016
103
142
Hyderabad
Yay!!! Another GNU/LINUX OS !!! Gud job mates!!! Downloading now!! I hope not only sailfish but Ubuntu Touch also for our devices!! :laugh: :victory: :good:

i tried to port ubuntu touch, well libhybris are not working, so device won't boot up. Once libhybris are ready for android 6, i'll port that too

---------- Post added at 18:38 ---------- Previous post was at 18:34 ----------

Lol.....there is VOLTE in working list...and....in note NO VOLTE:p

fixed the list. it is correct now
 

Top Liked Posts

  • There are no posts matching your filters.
  • 74
    SailfishOS_logo_large.png



    Disclaimer
    Code:
    WARNING: "Modifying or replacing your device’s software may void your device’s warranty, lead to data loss,
    hair loss, financial loss, privacy loss, security breaches, or other damage,
    and therefore must be done entirely at your own risk. No one affiliated
    with this project is responsible for your actions but yourself. Good luck."

    Hello and good news everybody!
    Sailfish OS on RN3P, this is a community port! support is now possible! Calls, Wifi, data, sensors, SMS, Camera (video recording is broken) are working fine.
    Bluetooth is a little buggy but works.

    We are also working to rebase onto CM 14.1 for more goodies; you can help us by testing Backup to cloud (and restore) , as this will be needed during the CM reflash.

    Status, download, installation...
    Sailfish OS is a GNU/Linux based mobile operating system, which is gesture-driven for the ease of use. It runs natively as glibc (not Android's bionic), has bash and busybox (not toolbox), uses Qt for UX, and other opensource projects in its middleware -- which basically is just like a Linux on your desktop, and runs native Qt apps and cmdline apps, but doesn't run Android apps (check for Android-in-a-Window above if you need them).
    And everything else you need to know:

    What's working :

    • Boots
    • RIL (Calls, SMS, Data)
    • Wi-Fi
    • Bluetooth
    • Camera except video record
    • Video Playback
    • Audio
    • Sensors
    • LED
    • GPS

    Known issues:

    • Hotspot and Bluetooth are a little buggy (works though)
    • Camcorder
    • VoLTE
    • Hardware keys
    • Fingerprint
    • Flash

    How to install:
    1. Make sure you have unlocked bootloader and TWRP installed. (recommended ZCX recovery,)
    2. Wipe Dalvik, System, Data, Internal Storage, Cache
    3. flash cm-13/lineage-13
    4. Format Data (*NOT wipe*)
    5. flash sailfishOS
    6. reboot

    NOTE:
    1. For Bluetooth to work, make sure you have it turned ON before rebooting.
    2. Wifi hotspot may not turn on at first attempt, try turning it off and then on, it should work.
    3. After using hotspot, it might take a while for WLAN settings to appear.
    4. NO VoLTE, FM radio support.
    5. Did not test SIM 2.
    6. Built-in browser doesn't work, use Web Pirate from Jolla Store instead

    Thanks to @Plamb1r and the Sailfish OS community for their help


    XDA:DevDB Information
    [ROM][GNU/Linux] Sailfish OS 2.0.5.6, ROM for the Xiaomi Redmi Note 3

    Contributors
    Plamb1r, akhilkalwakurthy
    Source Code: https://github.com/Sailfish-kenzo

    ROM OS Version: 6.0.x Marshmallow
    ROM Kernel: Linux 3.10.x
    ROM Firmware Required: cm13 is mandatory
    Based On: cm13

    Version Information
    Status: Testing
    Current Beta Version: 2.0.5.6-debug
    Beta Release Date: 2017-03-11

    Created 2017-03-11
    Last Updated 2017-03-12
    19
    video instructions how to instal and lil review

    First NON-ANDROID OS [Sailfish OS][Installation FAQ and Review][Redmi Note 3]
    tnks to srijansaxena11


    Report for bugs and if yu want to be tester info here
    17
    Guys, sorry for the delay. @gismoZ has decided to shift from stock CM-MM kernel to Radon kernel. As far as I know, there's no one else working on MM kernel. So, I've decided to shift to Radon too. I had to make a lot of changes for that but, made a build. I was about to release the build when my friend told me that camera is force-closing and also, the vibrator seems to go off randomly. I'm trying to get the logs. I'll release the build as soon as possible once the issue is fixed. Without kenzo, it is proving to be a great challenge to find the bugs. Hope you guys understand.
    16
    Donations for developing of Project

    12
    Finally wait is over iam able to dual boot sailfish os and omni rom

    Read every step carefully (if not you may endup with soft brick)
    BACKUP BACKUP BACKUP (take nandroid backup)
    1. you must installed sailfish os ( on sailfish os ) with twrp any (latest official 3.1.0.0 recommended)

    2. download latest dualboot patcher apk and utilities place it in your internal storage ( sd card recommended or otg will be also good (from twrp place it in internal storage ) link = https://dbp.noobdev.io/downloads/

    3. now download this two files
    1. https://mega.nz/#!bYwDVQSZ (decryption key = !rdW73RiG2VmmMlY_21JyJQ9VZYeKf841oKiHbPXHg9c )
    2. https://mega.nz/#!XUpCnBTS (decryption key = !fPI72kPT10LU79s6puO7hu9NChpNQSiyjTcfTVxa5xI )
    4. extract both archives (you can use fx file manager)
    the 1st one archive is twrp backup of mine sailfish os create folder named sailfish and copy all the files in that folder now copy that folder in internal storage TWRP -BACKUPS-3386bcf4-......... (in this directory)
    now the second one just copy the folder into internal storage
    5. then boot to twrp recovery hit restore button then select sailfish os backup that you copied earlier
    then restore boot system data cache.
    (after restoring you will get omni rom which is installed on data slot and sailfish os which is primary )
    6. after complete restore install dual boot utilities
    then select primary (sailfish) then select switch to then reboot system.
    if you want omni then select omni data-slot-a then reboot

    for reference watch this video only for 6th step while dualbooting
    https://www.youtube.com/watch?v=dZDJ5Ld2OhQ

    if that worked or liked for you then hit that damn like button