[ROM] [12.0.0_r2] ArrowOS Poco X3 [BETA/EARLY RELEASE]
- Thread starter ganesh varma
- Start date
That's cool. I thought there wasn't s radio so installed. Just looked it up again and found it.
Btw. Just did today's OTA update. All fine.
Last edited:
Today's update its not a update
The system it's auto "cook".
There's no true update since build 25/10/2022.
What does that mean? Same image as before?Today's update its not a update
The system it's auto "cook".
There's no true update since build 25/10/2022.
Same build 25/10/2022.
Check changelog source and you see there's no new entry since 23/10/2022 who is cook at 25/10/2022.
The system auto cook build 1/11/2022 and now 15/11/2022
Check changelog source and you see there's no new entry since 23/10/2022 who is cook at 25/10/2022.
The system auto cook build 1/11/2022 and now 15/11/2022
Thanks. I recognized that the want any changes in the change log. Do you expect further updates?
The size is slightly different, so something should have changed, just not important enough to be on the changelog.
Hi, anybody having trouble in receiving SMS ? This happens since I first install this ROM. There is notification from messaging app where it shows `Messages is processing an incoming message` when I was being sent a message, but the SMS will took hours before become accessible on the Messages app.
It's under Display - Lock screen
Attachments
With that configuration, the power menu still appears and is able in the locked screen
Attachments
The settings require a restart to take effect.
The power menu disappears, device controls still work though
Attachments
Hi guys.
The last update I made was with these files:
twrp_3.6.2_12-0-surya
fw_surya_miui_SURYAGlobal_V12.5.8.0.RJGMIXM_e57b4eef74_11.0
Arrow-v12.1-surya-OFFICIAL-20220829-GAPPS
To update to the last 12.1 version, do I need clean install?
Do I need to update TWRP and FW for that update?
If so, what versions to use?
Thanks
The last update I made was with these files:
twrp_3.6.2_12-0-surya
fw_surya_miui_SURYAGlobal_V12.5.8.0.RJGMIXM_e57b4eef74_11.0
Arrow-v12.1-surya-OFFICIAL-20220829-GAPPS
To update to the last 12.1 version, do I need clean install?
Do I need to update TWRP and FW for that update?
If so, what versions to use?
Thanks
Hi,
You should be fine.
I'm still on twrp_3.6.2_12-0-surya-2708.
And the latest source changelog (Device side changes) still states it is using V12.5.8.0 blobs.
I'm running on V13.0.3.0 (Europe) with no problems though other than missing the macro lens in gcam.
green2005
Senior Member
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
39
ArrowOS
Code:/* * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at us for messing up your device, We will laugh at you. * It is your fault because you chose to do all the modifications on your device. * Remember projects like these and the work done on them is a hobby to the * contributors and the team members, no one is working for you nor is getting paid for it * have some respect for the work done by them since it is done purely on interest or a hobby */
ABOUT
ArrowOS is an Android Open Source Project based Android mobile operating system started with the aim of keeping things simple, clean and neat.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Donate to us
Blog: blog.arrowos.net
Checkout more documentation at (maintainership/contributing): Check this out
WHAT WORKS?
- Almost everything
WHAT DOESN'T WORK?
- You tell me
DOWNLOADS
Click here to Download
Tip: Select OEM -> Device,choose Arrow version, choose build type: "GAPPS" or "VANILLA" to download.
Read our blog article/post about:
* HOW-TO report a bug
* GAPPS and VANILLA variants
* Checking build integrity
GPL compliance:
ROM Source- https://github.com/ArrowOS
Kernel Source- https://github.com/ArrowOS-Devices/android_kernel_xiaomi_surya.git158
Zzenyoo,
Thank you very much for showing me how to enable the Clear All Button At the Bottom of the Recents screen for ArrowOS 12 - Arrow-v12.0-surya-OFFICIAL-20220123-GAPPS.zip
I feel really stupid & highly embarrassed that I was not able to figure this out for myself. The answer was right in my face & I did not see it. I am truly humbled. Thank you again for your patience & your reply.
I included procedures & screenshots below to help anyone else that may want to turn on or off the Clear All Button At the Bottom of the Recents screen for ArrowOS 12.
Procedure
- Long press any blank space on the Lawnchair Launcher screen
- Select Home Settings from the menu
- Select Recents from the Settings menu
- Select Clear All Button at Bottom button
- Verify by selecting recents buttons at very bottom of screen. Clear all will now show at the bottom of the screen instead of the extreme left of the recents screen.
8Moderator Announcement
Thread has been cleaned. I'd appreciate if "unsuitable" posts are only reported but not replied to.
And allow me a personal remark: I've recognised some impatience in the reports. Please be aware that ALL moderators are volunteers who are doing this "job" absolutely for free besides our real life, real family and friends, real business and occupation. This means we aren't always able to immediately react to a report but I promise and can assure you, we do our very best that every report is handled as soon as possible. Thanks for your understanding.
Regards
Oswald Boelcke
Senior Moderator8
I managed to fix the annoying fingerprint issue (the one reported above by me, and by other users on the first few pages of this thread). The fingerprint sensor was acting like an "enter key" whenever I touched it, which was quite annyoing).
It was fixed after completely restarting the whole process, by reflashing the latest MIUI rom (12.5.3 Global) and then repeating all the steps to install ArrowOS. Here's a list of steps, if you're having the same issue or any other issues that might pop up for just some users:
1 - Use MiFlash20210226 to flash the ROM downloaded from xiaomifirmwareupdater website:
"MIUI V12.5.3.0.RJGMIXM Stable Official Update for POCO X3 NFC Global (surya)"
The archive name is: surya_global_images_V12.5.3.0.RJGMIXM_20211013.0000.00_11.0_global_9eca9fae68.tgz
Size: 5.2 GB (it's the fastboot type, not the recovery type).
Note 1: if you don't know how to do this, look for "[GUIDE]⚙ USE XIAOMI FLASH TOOL" here on XDA, by user @NOSS8
Note 2: It's normal to receive an error at the end when using the "clean all" option, right when the smartphone automatically reboots while flashing. As long as it's taking a while to flash all the necessary data, it should be fine.
2 - Don't know if this is necessary, but I booted into the MIUI 12.5.3 system, skipped most configs, then I let it finish the initial configuration. Made sure it's the last update avaliable through OTA.
3 - Reboot into fastboot (hold power +volume down).
4 - I used the "Minimal ADB and Fastboot" tool in order to use the fastboot command to flash the latest TWRP compatible with Android 12 by @brigudav
Currently, the file is called: twrp-3.5.2_10-12-surya-a12.img and you can find it here on XDA.
Note: Boot into TWRP right away after flashing it, don't let your smartphone boot into the MIUI or it'll be overwritten.
5 - While in TWRP, go to WIPE > Advanced wipe > Select "Dalvik / ART cache" + "Cache" + "Data" and confirm the action.
Press the home button to return to TWRP main menu.
6 - While in TWRP, use "install" to flash the zip archive of the latest firmware package for MIUI V12.5.3.0 (Global).
Currently, it's: fw_surya_miui_SURYAGlobal_V12.5.3.0.RJGMIXM_624ada8a33_11.0.zip also available through the xiaomifirmwareupdater website.
Press the home button to return to TWRP main menu.
Note: you can use your PC to send these zips into your smartphone's "Download" folder while in TWRP.
7 - Also while in TWRP, use "install" to flash the zip archive of the latest official ArrowOS (Gapps version) with android 12.
Note: Don't forget to go into WIPE > "format data", and typing "yes" to confirm, after flashing the ArrowOS Zip archive.
8 - Reboot system and you're done.
New posts
-
[GUIDE][FIRMWARE] QLink Scepter 8 Stock Firmware Restoration & Upgrading Guide- Latest: JovialQuestion
-
-
-
