[ROM][12.0] Project-Xtended XS-First-Blood [RN8/8T][Unified][Unofficial]

Search This thread
2021-X-Temp-Head.png

Disclaimer
* We're not responsible for bricked devices, dead SD card or anything happens with your device
* Flash on your own risk/knowledge.

------------------------------------------------------------------------------------------------------------------------------------------------


team_xtended.png

@SuperDroidBond | @mady51 | @mukesh22584 | @anishpratheepan | @xawlw | @SonalSingh18 | @Roger.T




features.png


SCREENSHOTS: Click HERE



instructions.png
  • Download ROM from below
  • Reboot to recovery
  • Wipe data, cache, dalvik cache
  • Flash latest android 11 firmware (Ginkgo | Willow)
  • Flash ROM zip
  • Flash GApps of your choice (if you prefer Google Apps), Flame GApps or BitGApps recommended (this is a Vanilla build).
  • Format data (if encrypted)
  • To disable auto encryption, flash DFE (optional)
  • Reboot
  • To get root access, reboot to recovery after ROM setup and flash Magisk.

WHAT WORKS?
Almost everything (boots, RIL, calls/sms, mobile data, volte/vowifi, wifi, bluetooth, gps, audio, camera, fingerprint, DT2W, wifi display, NFC on willow, etc)

WHAT DOESN'T WORK?
* Fast charging on Chinese variant of Redmi Note 8
* 48MP and Portrait mode in MiuiCamera
* Be sure to include logcat: check how to

Notes :-
* Vanilla Build
* MiuiCamera and XiaomiParts included
* QuicksilveR kernel v2.5 included
* Latest Android 11 firmware required
* Encryption is enabled by default
* SELinux is enforcing and SafetyNet passes
* Ginkgo builds are unified for both ginkgo and willow​
downloads.png



sources.png

ROM Source : here
Device Source : here
Kernel Source : here
(Thanks to @Adithya R for Device Resources)
 

Azizb750

Senior Member
Jan 31, 2015
194
173
Why NFC doesn't work on my phone? When I go to the settings shows that NFC is unavailable (I have willow)
 

wsdyleon

Senior Member
Feb 2, 2012
664
54
POCO M3 Pro / Redmi Note 10 5G
it seems i cannot boot into twrp normally (stuck at twrp booting)
without flashing the a12 firmware
i thought the twrp cannot read the partions correctly
luckily i can boot into normal system ,and fastboot
 
Last edited:

NeoPreacher

Senior Member
Dec 4, 2012
940
522
39
Bielefeld
Moto G5 Plus
Redmi Note 8
it seems i cannot boot into twrp normally (stuck at twrp booting)
without flashing the a12 firmware
i thought the twrp cannot read the partions correctly
luckily i can boot into normal system ,and fastboot
i remember that this behaviour was often a thing when a12 comes up for rn8(t) the first times. and there was a kind of solution for it. have a look in other threads or maybe someone else has more details bout it. ✌️
 
  • Like
Reactions: wsdyleon

BeriCud

Senior Member
Dec 9, 2010
258
41
it seems i cannot boot into twrp normally (stuck at twrp booting)
without flashing the a12 firmware
i thought the twrp cannot read the partions correctly
luckily i can boot into normal system ,and fastboot
It hapened to me too. But I wasn´t able to boot into system and recovery only to fastboot. So I flash MIUI and than falsh back to xtended.
 

NeoPreacher

Senior Member
Dec 4, 2012
940
522
39
Bielefeld
Moto G5 Plus
Redmi Note 8
The latest build (XS-v2 vanilla/gapps) is on official homepage: https://downloads.project-xtended.org/?dir=ginkgo

Edit for a small first impression (ginkgo):

1. Rebooting to recovery works flawlessly

2. This rom is feature-rich (damn!)

3. UI handling feels fluid

4. Just few hiccups while setting up things. changes of two or three optical things needed a reboot to apply correctly.

5. With Magisk Safetynet passes with MagiskHide enabled. Works out of the box without Magisk

6. It has DT2S on home screen which I like very much to have in a rom

Added a few ss for a little impression.
An extremely satisfying piece of work.
 

Attachments

  • Screenshot_20220121-161645_Einstellungen.png
    Screenshot_20220121-161645_Einstellungen.png
    404.6 KB · Views: 115
  • Screenshot_20220121-161820_Quickstep.png
    Screenshot_20220121-161820_Quickstep.png
    99 KB · Views: 112
  • Screenshot_20220121-161629_Einstellungen.png
    Screenshot_20220121-161629_Einstellungen.png
    152.6 KB · Views: 107
  • Screenshot_20220121-184919_Einstellungen.png
    Screenshot_20220121-184919_Einstellungen.png
    106.2 KB · Views: 119
Last edited:

Lucas_Maximiliano

Senior Member
Apr 30, 2015
277
73
Installed V2 Vanilla + Nikgapps basic in Willow
1. Not NFC
2. Fingerprint not working on third party apps
Everything else seems to work fine.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 8
    2021-X-Temp-Head.png

    Disclaimer
    * We're not responsible for bricked devices, dead SD card or anything happens with your device
    * Flash on your own risk/knowledge.

    ------------------------------------------------------------------------------------------------------------------------------------------------


    team_xtended.png

    @SuperDroidBond | @mady51 | @mukesh22584 | @anishpratheepan | @xawlw | @SonalSingh18 | @Roger.T




    features.png


    SCREENSHOTS: Click HERE



    instructions.png
    • Download ROM from below
    • Reboot to recovery
    • Wipe data, cache, dalvik cache
    • Flash latest android 11 firmware (Ginkgo | Willow)
    • Flash ROM zip
    • Flash GApps of your choice (if you prefer Google Apps), Flame GApps or BitGApps recommended (this is a Vanilla build).
    • Format data (if encrypted)
    • To disable auto encryption, flash DFE (optional)
    • Reboot
    • To get root access, reboot to recovery after ROM setup and flash Magisk.

    WHAT WORKS?
    Almost everything (boots, RIL, calls/sms, mobile data, volte/vowifi, wifi, bluetooth, gps, audio, camera, fingerprint, DT2W, wifi display, NFC on willow, etc)

    WHAT DOESN'T WORK?
    * Fast charging on Chinese variant of Redmi Note 8
    * 48MP and Portrait mode in MiuiCamera
    * Be sure to include logcat: check how to

    Notes :-
    * Vanilla Build
    * MiuiCamera and XiaomiParts included
    * QuicksilveR kernel v2.5 included
    * Latest Android 11 firmware required
    * Encryption is enabled by default
    * SELinux is enforcing and SafetyNet passes
    * Ginkgo builds are unified for both ginkgo and willow​
    downloads.png



    sources.png

    ROM Source : here
    Device Source : here
    Kernel Source : here
    (Thanks to @Adithya R for Device Resources)
    1
    it seems i cannot boot into twrp normally (stuck at twrp booting)
    without flashing the a12 firmware
    i thought the twrp cannot read the partions correctly
    luckily i can boot into normal system ,and fastboot
    i remember that this behaviour was often a thing when a12 comes up for rn8(t) the first times. and there was a kind of solution for it. have a look in other threads or maybe someone else has more details bout it. ✌️