• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Development [ROM][12.0][UNOFFICIAL] FLUID OS v2.0 BETA (mojito/sunny).

Search This thread

PHOENIX-9

Senior Member
Mar 15, 2013
304
78
26
Redmi Note 10
@Anush02198 thank you for the ROM!

for anyone else can you please provide feedback?
like camera/ANX status
calls (Phone, WA.... etc)
firmware needed
any major Bugs.. sorry for this
its my only phone and I daily drive it... so just trying is hard for me

thanks in advance <3
 

inn0ichi

Member
Mar 7, 2020
23
3
@Anush02198 thank you for the ROM!

for anyone else can you please provide feedback?
like camera/ANX status
calls (Phone, WA.... etc)
firmware needed
any major Bugs.. sorry for this
its my only phone and I daily drive it... so just trying is hard for me

thanks in advance <3
I've been using AOSPK and there is some UI bugs but nothing major. Sometimes the wifi disconnects but i think it's just my networking setup. will try this at the end of the week
 
  • Like
Reactions: PHOENIX-9

inn0ichi

Member
Mar 7, 2020
23
3
My friend wanted my to flash this rom so I flashed using OTA tool but it reboots to fastboot with/without gapps post install
 

PHOENIX-9

Senior Member
Mar 15, 2013
304
78
26
Redmi Note 10
My friend wanted my to flash this rom so I flashed using OTA tool but it reboots to fastboot with/without gapps post install
same here
anyone with any solution?

----------------------

edit

I flashed stock MIUI using mu flash tool
then flashed the ROM with OTA tool
took some time.. it booted
then just followed the instruction

but anyone tried Magisk?
 
Last edited:

inn0ichi

Member
Mar 7, 2020
23
3
same here
anyone with any solution?

----------------------

edit

I flashed stock MIUI using mu flash tool
then flashed the ROM with OTA tool
took some time.. it booted
then just followed the instruction

but anyone tried Magisk?
Magisk could cause some problems. Tried it on AOSPK and the WiFi won't turn on after
 

PHOENIX-9

Senior Member
Mar 15, 2013
304
78
26
Redmi Note 10
after many hours and reboots ... it is up
used nikgapps core.. then flashed what I addons I could - including pixel launcher

if I may request from the dev to increase partition size so it can fit more Gapps... i wanted the stock.. not gonna happen xD

cts didn't pass tho for me... even with multiple modules flashed

I'm not sure but I keep getting "android system intelligence keeps stopping"

so far good but maybe not for a daily driver... lets see

again thank you dev

Magisk could cause some problems. Tried it on AOSPK and the WiFi won't turn on after
all good in here
 

inn0ichi

Member
Mar 7, 2020
23
3
after many hours and reboots ... it is up
used nikgapps core.. then flashed what I addons I could - including pixel launcher

if I may request from the dev to increase partition size so it can fit more Gapps... i wanted the stock.. not gonna happen xD

cts didn't pass tho for me... even with multiple modules flashed

I'm not sure but I keep getting "android system intelligence keeps stopping"

so far good but maybe not for a daily driver... lets see

again thank you dev


all good in here
how did you get twrp to boot. I will flash it to the phone as a last resort but when i try fastboot boot twrp.img it gets stuck at the booting of twrp.
 

DLloyd

Senior Member
Jul 26, 2010
254
27
Redmi Note 10
I've installed pixel launcher from NikGapps as an addon, does anyone see any info in the at a glance widget? I can't even get weather to show and at a glace settings fails. Also themes aren't applied in status bar, is that a known issue? Thx
 

PHOENIX-9

Senior Member
Mar 15, 2013
304
78
26
Redmi Note 10
I've installed pixel launcher from NikGapps as an addon, does anyone see any info in the at a glance widget? I can't even get weather to show and at a glace settings fails. Also themes aren't applied in status bar, is that a known issue? Thx
Same issues regarding pixel launcher.. I think it's Gapps-side issue
Dor theming use extra pixel v6
It's a magisk modual
This will fix theming issues for now
 

MPK99

Senior Member
Jun 25, 2017
548
383
Mexico
gitlab.com
Redmi Note 10
after many hours and reboots ... it is up
used nikgapps core.. then flashed what I addons I could - including pixel launcher

if I may request from the dev to increase partition size so it can fit more Gapps... i wanted the stock.. not gonna happen xD

cts didn't pass tho for me... even with multiple modules flashed
> For root, use Magisk Canary
> Enable Zygisk under magisk settings, reboot & add Google Play Services to DenyList
> Flash PropsHide Magisk module & reboot
> Get any terminal & do
Code:
su
/system/xbin/props
1. Edit device fingerprint
f (Pick a certified fingerprint)
7 (Google)
23 (Pixel 4 XL)
3 (for Android 12)
Yes to confirm
Reboot to apply the changes.
 
Last edited:
  • Like
Reactions: PHOENIX-9

Top Liked Posts

  • There are no posts matching your filters.
  • 4
    New Build is out
    2
    THE ONLY THING MISSING IN THIS ROM IS CUSTOMIZATION
    I'd rather use a stable rom than a cluttered one.
    1
    I'd rather use a stable rom than a cluttered one.
    Same! we have to be thankful to all our developers!
    1
    New build is out :)
    1
    New build is out :) . Changelogs and links are updated in thread
  • 8
    5hLHTa1.png



    Code:
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */


    Read the entire OP! Be respectful to each other and don't ask for ETAs, it's considered as being rude!



    xsOmpl0.png


    Fluid is an aftermarket Android custom ROM distribution based on AOSP, focused on bringing a better UI/UX to Android with a fluid experience coupled with themes and customisations.
    #FeelsFluid




    YxEFDix.png



    Fluid doesn't aim at providing all the customisation available on the planet. We are focused on a cleaner, more Material design approach, with a few twists [NOPARSE];)[/NOPARSE] that assured, we do have a dedicated theme engine with cool stuff getting added every new update. So sit back and enjoy Fluid on your device!



    Z2FIVZT.png




    Download Fluid Redmi Note 10


    Redmi Note 10


    JfsFznb.png


    Wanna experience Fluid on your phone? Go ahead fam!

    Code:
    [b]- Download the ROM
    - Backup everything
    - Make a full wipe (system, data, cache, dalvik)
    - Flash the FluidOS via OTA script / OrangeFox
    - Reboot and let it boot (NOTE:- The Rom takes much longer time to boot be patient  (Splash screen may appear for much longer time))
    - Boot into twrp
    - Flash Gapps (Flamegapps Basic recommended)
    - And at last Reboot!
    [First boot will take a few minutes! Have patience]
    Clean Flash is always recommended![/b]


    vYMqHGl.png



    A clean flash is always recommended. Bug reports are not appreciated if not clean flashed.
    Remove any kind of security PINs/Password and Fingerprints before flashing this build.

    [/b][/CODE]


    6Fqfn5R.png



    Wanna report bugs and want them begone? Give Logcats, mention your device name, mention if any mods and kernels, if used and please be specific about it. By helping us, you are helping yourself too.
    -> How to take Logcats?
    https://goo.gl/UcTM9 and https://goo.gl/J4CSEP


    Em5NS0v.png




    Visit our Website. Subscribe to our Telegram Announcements Channel. Also join our Telegram Community support Chat!

    Want to contribute to the development of this ROM?
    Checkout our Github


    hOjcXDi.png



    DEVICE SOURCES

    Kernel :- Kernel
    Common_DT:- xiaomi-sdm678 / android_device_xiaomi_sm6150-common
    DT :- xiaomi-sdm678 / android_device_xiaomi_mojito

    People behind this amazing ROM!


    - Ender1324
    - AndroBuddy
    - SebaUbuntu
    - Dyrex2004
    - Ovenoboyo
    8
    Screenshots :- SS


    Changelogs

    ========================
    ALPHA 1

    OCT 14 , 2021

    ========================

    + Initial Alpha Build

    ========================
    ALPHA 2

    OCT 20, 2021

    ========================

    + Updated WCS Kernel included
    + Improved System Stability
    + Increased Reseved Partition Size ( Fixes issues of flashing bit more heavier gapps packages ).
    + Now Build can be Flashed via OrangeFox (Thanx to Ayaxat for testing the build).
    + Fixed Screen Recording Lags

    ========================
    ALPHA 3

    NOV 8 , 2021

    ========================
    + Updated WCS Kernel included
    + Tweaked Reserve Partition sizes ( Might fix some flashing issues for some users).
    + Fixed sepolicy denials
    + Selinux is now Enforcing
    + Rom is also force encrypted
    + Improved Booting time
    + sm6150-common: Provide [email protected] on vendor
    + sm6150-common: props: Enable skia reduceOpsTaskSplitting
    + sm6150-common: props: Don't write binary XML files

    ========================
    BETA 1

    NOV 10 , 2021

    ========================
    + New Rebased WCS Kernel included
    + sm6150-common: Set NUM_FRAMEBUFFER_SURFACE_BUFFERS to 3
    + sm6150-common: Build atrace 1.0 service hals
    + sm6150-common: rootdir: Remove enable-low-power trigger from recovery
    + sm6150-common: rootdir: Allow all filesystems for USB-OTG
    + sm6150-common: prop: Disable sf EGL image tracking
    + sm6150-common: Kill kernel cmdline console parameters
    + sm6150-common: wifi: Disable wifi packet logging
    + sm6150-common: configs: power: Remove pixel audio hints
    + sm6150-common: overlay: Disable global mode and CDMA choices
    + sm6150-common: overlay: Allow seamless Doze state transitions
    + sm6150-common: rootdir: Chown drv8846_dev & akm09970 camera nodes
    + sm6150-common: overlay: Snap: Enable camera API v2
    + sm6150-common: sepolicy: Address virtual AB OTA denies
    + sm6150-common: prop: Switch to Codec2 by default
    + sm6150-common:Kang HWUI props from stock mojito qssi-user 11 RKQ1.201022.002 V12.5.3.0.RKGMIXM release-keys
    + sm6150-common:Add 300Mhz scaling_min_freq for CPUBigClusterMinFreq and CPULittleClusterMinFreq
    + Improved System Stability
    + Improved overall responsiveness and fluidity


    ========================
    BETA 2

    NOV 16 , 2021

    ========================

    + Updated WCSF Kernel
    + sm6150-common: add missing hals to FCM
    + sm6150-common: Define [email protected] into FCM
    + sm6150-common: BoardConfig: Drop graphics layer memory buffer
    + sm6150-common: Add HDR & WCG Flags
    + sm6150-common: Do not use phase offsets as duration
    + sm6150-common: overlay: Advertise fingerprint on power button
    + Improved Stability
    + 1080p Youtube playback issue addressed (FWIP)

    ========================
    BETA 3

    NOV 29 , 2021

    ========================

    + Updated WCSF Kernel
    + sm6150-common: Decomonize some camera blobs
    + sm6150-common:Add a missing media blob
    + mojito:Add Few missing camera blobs
    + mojito:Add libcameraservice.so as prebuilt from stock
    + sm6150-common:sepolicy: fix Widevine DRM
    + sm6150-common:Add missing DRM blobs from stock
    + Fixed Widevine L1

    ========================
    BETA 4

    DEC 02 , 2021

    ========================
    + sm6150-common:Build some media and camera packages
    + msm: camera: Use boot clock for recording start time
    + Fixed Camera video recording issues (Checked with Camera2 and Gcam both)
    + Improved System Stability
    + Improved overall responsiveness and fluidity

    NOTES :- CTS is failed by default use appropriate magisk modules for CTS pass
    Use Included LOS recovery for flashing gapps etc.




    *NOTE:- There may be bugs in this build
    4
    New Build is out
    3
    New Build is up Changelogs and Links are updated above
    2
    THE ONLY THING MISSING IN THIS ROM IS CUSTOMIZATION
    I'd rather use a stable rom than a cluttered one.