Development [ROM] [12.1.0] [alioth/aliothin] ArrowOS 12.1 [OFFICIAL]

Search This thread

Whiskeyomega

Senior Member
Mar 18, 2016
195
321
Manchester
LG V30
ASUS ROG Phone II
Gave up using the updater. Much quicker just to download and flash using the pc. It shouldnt take hours for a 1GB update.
Im also having an issue with SMS permissions not being allowed with google play services and it keeps bugging me about it.

Edit. Last update fixed sms permissions
 

chrisje1985

Member
Aug 16, 2015
32
2
I have the issue that when i get called, even by someone that's in my contact list, it won't show the name of the caller. Is this an issue because i'm on the EU firmware (13.0.6.0.SKHEUXM)? if yes, is it safe to upload the global firmware without causing data loss?
 

ngenx

Member
Jul 5, 2015
20
9
I have the issue that when i get called, even by someone that's in my contact list, it won't show the name of the caller. Is this an issue because i'm on the EU firmware (13.0.6.0.SKHEUXM)? if yes, is it safe to upload the global firmware without causing data loss?
Yes it is safe to flash the global firmware
I've done it a few times switching from global to eu then back to global again.
 
  • Like
Reactions: PavlusOid

ngenx

Member
Jul 5, 2015
20
9
I have the issue that when i get called, even by someone that's in my contact list, it won't show the name of the caller. Is this an issue because i'm on the EU firmware (13.0.6.0.SKHEUXM)? if yes, is it safe to upload the global firmware without causing data loss?
Most likely. Make sure you flash the recommended firmware.
 

Anevo

New member
Apr 27, 2014
1
0
Hi, I've got recently this poco f3. So far I'm impressed by the performance of the phone but disappointed in the notification system it has.
All the notifications feel rough, especially the ones on the lock screen. You can't swipe them and if you press on the "x" to close them, they just pop up the "next message" and also the lock screen notifications a bit buggy.
I'm comparing it with the stock poco f1 fyi.

On the poco f3 I have MIUI Global 13.0.6.0 Stable (SKHEUXM) , Android 12 SKQ1.211006.001 and Kernel 4.19.113-perf-g5c1bd521c3a4, and I'd like to know if it is OK for me to install ArrowOS on this device with the specs mentioned above?

Thanks a lot!
 
Hi, I've got recently this poco f3. So far I'm impressed by the performance of the phone but disappointed in the notification system it has.
All the notifications feel rough, especially the ones on the lock screen. You can't swipe them and if you press on the "x" to close them, they just pop up the "next message" and also the lock screen notifications a bit buggy.
I'm comparing it with the stock poco f1 fyi.

On the poco f3 I have MIUI Global 13.0.6.0 Stable (SKHEUXM) , Android 12 SKQ1.211006.001 and Kernel 4.19.113-perf-g5c1bd521c3a4, and I'd like to know if it is OK for me to install ArrowOS on this device with the specs mentioned above?

Thanks a lot!
The firmware you have is not the recommended one. It doesn't mean you'll have issues, but it's preferable to stick on maintainer guidelines
 

Quocson100

Member
Jan 20, 2018
30
8
Hi, thanks for making a great version room F3. You can put the changelog at the top of the page so that I can find and see the change easily without having to search every page.
 

Entity 0

Senior Member
Sep 21, 2016
61
10
I have the issue that when i get called, even by someone that's in my contact list, it won't show the name of the caller. Is this an issue because i'm on the EU firmware (13.0.6.0.SKHEUXM)? if yes, is it safe to upload the global firmware without causing data loss?
Could be due to 4g calling option being on.
 

angriest

Member
Feb 12, 2010
37
14
Xiaomi Poco F3
LDAC Bluetooth codec isn't available for me in the latest update. Looks like there were a lot of Bluetooth changes in the update, so perhaps it'll come back next update. Very solid otherwise. Thanks
 
  • Like
Reactions: Brodelpiet

Elyorn

New member
May 22, 2022
2
0
LDAC Bluetooth codec isn't available for me in the latest update. Looks like there were a lot of Bluetooth changes in the update, so perhaps it'll come back next update. Very solid otherwise. Thanks
So it's not just me, huh? Kinda wonder what happened. i hope it's not a licensing issue, i assume not, but still. my headphones rn only have aac and sbc as options.
 

Brodelpiet

Member
Apr 28, 2018
40
15
LDAC Bluetooth codec isn't available for me in the latest update. Looks like there were a lot of Bluetooth changes in the update, so perhaps it'll come back next update. Very solid otherwise. Thanks
I can confirm this. LDAC is gone. Instead my Sony headphones are now using aptX HD for the bluetooth connection with my F3.
 

pathyas

Member
Oct 7, 2013
23
2
35
Pune
Xiaomi Poco F3
Realme GT 2 Pro
I am facing this weird issue with the latest ArrowOS build, my voice is not going through the mobile call, but does when I call using WhatsAPP or Trucaller HD call. I tried resetting the network setting, VOLTE On and Off, but nothing seems to be working, can anyone guide or help solve this issue?

Thanks,
 

Adolyer

Member
Sep 24, 2020
6
0
I installed arrowos today and it crashed by itself several times while playing diablo. I didn't have this problem in previous roms.
 

o3266013

Member
Dec 14, 2018
7
0
How do I update the firmware? I'm currently running ArrowOS 11 with 12.5.5.0 and want to update to V13.0.2.0.SKHMIXM but I'm not sure about how to do it.

Can it be done through ArrowOS recovery or do I need to use a PC?
 

Adolyer

Member
Sep 24, 2020
6
0
How do I update the firmware? I'm currently running ArrowOS 11 with 12.5.5.0 and want to update to V13.0.2.0.SKHMIXM but I'm not sure about how to do it.

Can it be done through ArrowOS recovery or do I need to use a PC?
first flash fw with a12 twrp. then follow the clean install instructions. You can also install twrp from another phone. training videos available
 

o3266013

Member
Dec 14, 2018
7
0
first flash fw with a12 twrp. then follow the clean install instructions. You can also install twrp from another phone. training videos available
Thanks for the reply.

So I should download the unofficial android 12 build from the bottom of this post: https://forum.xda-developers.com/t/...eamwin-recovery-project.4272625/post-84960573

Do I need to actually install TWRP or will it be ok to just boot TWRP on the phone as I'm only updating the firmware?
 

mocmocmoc

Senior Member
Jan 24, 2011
68
30
Xiaomi Poco F3
Poco F3 screen suddenly doesn't turn on. It was never dropped, it was not plugged in. Just laying on the table idling.
I plugged it into PC and mirror the screen to PC monitor. Phone is still working fine, just the screen not turning on. Restarting the phone fixes it. I'm on the latest Arrow version.
I wonder what caused it?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 14
    Update 2022-08-08

    Device changelog:

    - Misc fixed and upstream changes.

    Kernel:
    - Merge branch android-4.19-stable of android/kernel/common
    - Merge tag LA.UM.9.12.r1-14400.02-SMxx50.QSSI13.0 of CLO
    - Mics fixes and upstream chanes.

    ROM changelog:
    - https://arrowos.net/changelog.php

    Installation instruction: https://forum.xda-developers.com/t/...othin-arrowos-12-0-beta.4348617/post-85790097

    Download: https://arrowos.net/download/alioth

    Note:
    - Recommend use with fw part MIUI V13.0.3.0.SKHMIXM (A12 Global) !!!


    P.S. My personal Telegram support chat: https://t.me/mipa_lab
    13
    Update 2022-08-01

    Device changelog:

    - Misc fixed and upstream changes.

    Kernel:
    - Merge branch upstream-f2fs-stable-linux-4.19.y of android/kernel/common
    - ARM64: configs: arrow: Enable bandwidth limiting options
    - ARM64: configs: arrow: enable optimized SHA-512 implementations
    - Import new fs/exfat
    - Mics fixes and upstream chanes.

    ROM changelog:
    - https://arrowos.net/changelog.php

    Installation instruction: https://forum.xda-developers.com/t/...othin-arrowos-12-0-beta.4348617/post-85790097

    Download: https://arrowos.net/download/alioth

    Note:
    - Recommend use with fw part MIUI V13.0.3.0.SKHMIXM (A12 Global) !!!


    P.S. My personal Telegram support chat: https://t.me/mipa_lab
    8
    Update 2022-07-25

    Device changelog:
    - Switch to QTI BT Stack
    - Re-work audio policy configs
    - Fix display flicker after exiting AD/AOD
    - rro_overlays: Add support for doze auto brightness
    - rro_overlays: Declare 6ghz wifi support
    - Update audio props to MIUI S
    - props: Relax automatic refresh rate switching
    - rro_overlays: Set vibrator ramp down duration
    - Switch to source-built mlipay interface
    - Build mtdservice interface lib from source
    - Import Xiaomi CIT Service
    - sepolicy: Address denials
    - Misc fixed and upstream changes.

    Kernel:
    - Merge branch android-4.19-stable of android/kernel/common
    - Misc fixes and upstream changes.

    ROM changelog:
    - Merged July AOSP tag (July ASB)
    - https://arrowos.net/changelog.php

    Installation instruction: https://forum.xda-developers.com/t/...othin-arrowos-12-0-beta.4348617/post-85790097

    Download: https://arrowos.net/download/alioth

    Note:
    - Recommend use with fw part MIUI V13.0.3.0.SKHMIXM (A12 Global) !!!


    P.S. My personal Telegram support chat: https://t.me/mipa_lab
    3
    How did you dirty flash using twrp?
    What steps did you follow?
    First I moved the arrowOS img file to my phone storage, turned off my find device, and removed my screen lock completely.

    Then download twrp skkk for alioth from here: https://dl.akr-developers.com/?dir=skkk/TWRP/A12
    So you go to the 5.1 folder and find the Alioth img file, as of right now it looks like this: [BOOT]3.6.2_12-RedmiK40-RedmiPOCOF3_v5.1_A12-alioth-skkk_b8cf297a.img - 192.00MB
    Put it where the adb and fastboot files are in your computer. I also renamed it to twrp362.img
    Then you reboot your phone to fastboot mode. When it's off press and hold power and vol down.
    Then on your computer open cmd as administrator to where you have the adb and fastboot files.
    Type: fastboot boot twrp362.img
    Wait for it to push twrp in your phone and your phone will reboot to twrp.
    You can now use the install option;TWRP will see your storage, so you can install from your storage device now. After installation just reboot
    No need to wipe cache or anything else.

    Alternative method, This is how i do it personally:
    After twrp is booted and running on my phone, I type on my computer:
    adb shell
    cd sdcard
    twrp install ArrrowOS.img
    (Then i'll wait until cd prompt comes back on)
    exit
    adb reboot

    I have not permanently installed twrp on my phone. Whenever i want to update, I fastboot boot twrp.img to my phone and update and install magisk that way, but you can install twrp to your phone within twrp itself. Do not flash twrp to your phone with the fastboot command! As in, just use the command: fastboot boot twrp362.img and don't use other fastboot commands.
    3
    @palaych May I ask what is meant with the 6ghz wifi support?
    As far as I know alioth does not support 6ghz wifi ... SD
    SDM870 (SM8250-AC) don't support, just checkout with kona, we won't have any effect.

    hello i can't find the face unlock !?
    Because AOSP removed it some year's ago yet....

    is Google pay working for anyoine on latest version?i have tried all the latest methods and cannot add my card to Google wallet
    Should work, maybe try clean gms app data/cache. If you use Magisk, follow instructions for hide root.
  • 76
    logo.png

    ArrowOS

    Code:
    /*
    * We are not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at us for messing up your device, We will laugh at you.
    * It is your fault because you chose to do all the modifications on your device.
    * Remember projects like these and the work done on them is a hobby to the
    * contributors and the team members, no one is working for you nor is getting paid for it
    * have some respect for the work done by them since it is done purely on interest or a hobby
    */

    ABOUT
    ArrowOS
    is an Android Open Source Project based Android mobile operating system started with the aim of keeping things simple, clean and neat.

    Website: https://arrowos.net
    Telegram: Channel | TG Portal/Links
    Github: https://github.com/ArrowOS
    Code Review: review.arrowos.net
    E-mail: arrowos.contact
    PayPal: Donate to us
    Blog: blog.arrowos.net

    Checkout more documentation at (maintainership/contributing): Check this out

    WHAT WORKS?
    • Almost everything

    WHAT DOESN'T WORK?
    • You tell me
    Be sure to include a log : check how to

    DOWNLOADS
    Click here to Download
    Tip: Select OEM -> Device, choose Arrow-12.1 version, choose build type: "GAPPS" or "VANILLA" to download.

    Read our blog article/post about:
    * HOW-TO report a bug
    * GAPPS and VANILLA variants
    * Checking build integrity

    GPL compliance:
    ROM Source
    - https://github.com/ArrowOS
    Kernel Source- https://github.com/ArrowOS-Devices/android_kernel_xiaomi_alioth

    ROM OS Version: Android 12L
    ROM Kernel: Linux 4.x
    ROM Firmware Required: MIUI S
    Based On: AOSP
    49
    INSTALLATION PROCEDURE:

    Arrow-12.1: Recommend use with fw part MIUI V13.0.2.0.SKHMIXM (A12 Global).
    Arrow-12.0: Recommend use with fw part MIUI 12.5.5.0 Global (MI).

    __________________________________________________

    First installation (Clean flash):

    You need PC with adb/fastboot tools.
    Download boot, vendor_boot and rom zip:
    1. https://drive.google.com/file/d/1o-4T4hfEtxECIss-DVSSYAM1Kvy2iDN9/view?usp=sharing
    2. https://drive.google.com/file/d/1PgtI8bOV1yjmTZJ7euP6xDFzMszY6AXb/view?usp=sharing
    3. https://arrowos.net/download/alioth

    Reboot in fastboot. Flash arrowos recovery (boot.img and vendor_boot.img):

    fastboot flash boot_ab boot_alioth.img fastboot flash vendor_boot_ab vendor_boot_alioth.img

    Reboot in ArrowOS Recovery:

    fastboot reboot recovery

    Make format data (Factory reset -> Format data).

    Flash ROM (Apply update -> Apply from ADB):


    adb sideload name.zip

    Follow what show on device, should be ... Step 1/2 -> 2/2, then flashing ended, can reboot device in system. (In cmdline: If the process succeeds the output will stop at 47% and report `adb: failed to read command: Success`. In some cases it will report `adb: failed to read command: No error` which is also fine!")

    If you want install separate gapps on vanilla buildtype, after flash ROM:

    Advanced -> Reboot to recovery

    Flash gapps (Apply update -> Apply from ADB):


    adb sideload name.zip

    __________________________________________________

    Install Update (dirty flash):

    Go in Settings -> System -> Updater


    Downlad new build -> Install

    Device will automatically download, install a new build and reboot.

    ___________________________________________________

    Update arrow-12.0 -> arrow-12.1 (dirty flash):

    You need PC with adb/fastboot tools.

    1) Download new build and reboot into Recovery

    2) Flash ROM (Apply update -> Apply from ADB):

    adb sideload name.zip

    3) Reboot into System

    __________________________________________________

    Also you can use TWRP for install or update this ROM. Instructions you can find in twrp topics or telegram groups.

    __________________________________________________


    My official telegram group: CLICK HERE
    18
    Update 2022-02-04

    Device changelog:
    - partial rebase and cleanup tree
    - audio: Drop unuse effects
    - audio: Partial sync audio configuration with stock
    - Convert overlays into Runtime Resource Overlays
    - Misc fixes and upstream changes.

    Kernel:
    - Merge branch android-4.19-stable of android/kernel/common
    - Misc fixes and upstream changes.

    ROM changelog:
    - Monet Engine Settings
    - More info: https://arrowos.net/changelog.php

    Installation instruction: https://forum.xda-developers.com/t/...othin-arrowos-12-0-beta.4348617/post-85790097

    Download: https://arrowos.net/download/alioth

    Note:
    - Recommend use with fw part MIUI 12.5.5.0 (A11) Global (MI).


    P.S. My personal Telegram support chat: https://t.me/mipa_lab
    14
    Update 2021-12-22

    Device changelog:
    - Build with AOSP Clang 14.0.0 (r437112)
    - sepolicy: Address denials for XiaomiParts
    - parts: Use current target SDK and set exported flag
    - parts: Increase BootCompletedReceiver priority
    - props: don't latch unsignal buffers
    - props: Disable debug.sf.enable_hwc_vds
    - Misc fixes and upstream changes.

    Kernel:
    - Merge branch android-4.19-stable of android kernel common
    - Merge branch linux-4.19.y of jaegeuk/f2fs-stable
    - Merge CAF tag LA.UM.9.12.r1-13500.01-SMxx50.QSSI12.0
    - Misc fixes and upstream changes.

    ROM changelog: https://arrowos.net/changelog.php

    Installation instruction: https://forum.xda-developers.com/t/...othin-arrowos-12-0-beta.4348617/post-85790097

    Download: https://arrowos.net/download/alioth


    Note:
    - Recommend use with fw part MIUI V12.5.4.0 and newer (global/India/etc).

    P.S. My personal Telegram support chat: https://t.me/mipa_lab
    14
    Update 2021-12-05

    Device changelog:
    - props: Update the transcoding operating rate
    - props: Use FUSE passthrough by default
    - Add permission OpenGL ES DEQP
    - Misc fixes and upstream changes.

    Kernel:
    - Misc fixes and upstream changes.

    ROM changelog: https://arrowos.net/changelog.php


    Installation instruction: https://forum.xda-developers.com/t/...othin-arrowos-12-0-beta.4348617/post-85790097


    Download: https://arrowos.net/download/alioth


    Note:
    - Recommend use with fw part MIUI V12.5.4.0 and newer (global/India/etc).


    P.S. My personal Telegram support chat: https://t.me/mipa_lab