Development [ROM][12.1][OFFICIAL][ALIOTH/ALIOTHIN] crDroid v8.14 [23.03.2023]

[NEOVerse!XChara]

AYO MAN, NOW MY PHONE SHUTTING DOWN

fixed

 

[phy96]

FLASHING TIME
NEW crDroid BUILD 27.11.2022
DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING

crDroid statistics

crDroid TG Group

SELINUX ENFORCING ​

crDroidAndroid-12.1-20221127-alioth-v8.11.zip


NOTE :

• gappless build
• Gapps Basic recommended + your choice of addons
• Safetynet Pass out of the box (magisk hide)
• Remember to use the recommended fw
• Join our Telegram crDroid Poco F3 group

CLEAN FLASH MANDATORY if coming from 8.2 !!

• make use of recommended TWRP
• boot recovery
• flash Firmware v13.0.3.0.SKHEUXM or V13.0.3.0.SKHMIXM (recommended)
• flash crDroid (toggle auto flash twrp)
• reboot recovery
• (optional) flash Gapps (no auto toggle needed)
• (optional) flash Magisk (no auto toggle needed)
• (optional) flash DFE
• format
• boot system

DIRTY

• skip format

====================
27-11-2022
====================

* kernel upstreamed to 4.19.267 InfiniR v2.39
* enable 5GHz/6GHz Hotspot band support
* synced with latest sources
* updated translations
* some other fixes and improvements

crDroid.net - Blog

official crDroid ROM website

crdroid.net

TEAM :
@raystef66
@immi803
Artur 'who's parents couldn't afford the extra H'
@AKASHPAUL aka "why not just ask Google, right?!"


InfiniR Alioth : https://github.com/raystef66/InfiniR_kernel_alioth (based on Optimus Drunk)

YT installation vid CR8 :

thnx @munchy_cool

Hi there,
"* enable 5GHz/6GHz Hotspot band support"
It seems that Poco F3 doesn't support 6GHz wifi from the hardware level?
So which phone that I could flash into this rom to use 6Ghz WiFi?
Thanks a lot~

 

[raystef66]

Hi there,
"* enable 5GHz/6GHz Hotspot band support"
It seems that Poco F3 doesn't support 6GHz wifi from the hardware level?
So which phone that I could flash into this rom to use 6Ghz WiFi?
Thanks a lot~

Afaik it does support wifi 3. Haven't tested myself but do take a look here.

 

[phy96]

Afaik it does support wifi 3. Haven't tested myself but do take a look here.

Hi there,
The Snapdragon 870 does support WiFi6, but it's not support 6GHz(WiFi6E and WiFi7 only), so that option is the case for WiFi6 Hotspot, instead of the 6GHz hotspot~
Thanks a lot for the confirmation, it should be a statement error here.
Just wondering if we can unlock 6GHz support on the EU/US version Xiaomi 12/13, which supports 6GHz from hardware level~

 

[theoneofgod]

With 6GHz hotspot I'm getting around 200Mbps link speed on a 6E device. 1.2Gbps when switched to 5GHz

 

[raystef66]

FLASHING TIME
NEW crDroid BUILD 11.02.2023
DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING

crDroid statistics

crDroid TG Group

SELINUX ENFORCING ​

crDroidAndroid-12.1-20230211-alioth-v8.13.zip


NOTE :

• gappless build
• Gapps Basic recommended + your choice of addons
• Safetynet Pass out of the box (magisk hide)
• Remember to use the recommended fw
• Join our Telegram crDroid Poco F3 group

CLEAN FLASH MANDATORY if coming from 8.2 !!

• make use of recommended TWRP
• boot recovery
• flash Firmware v13.0.3.0.SKHEUXM or V13.0.3.0.SKHMIXM (recommended)
• flash crDroid (toggle auto flash twrp)
• reboot recovery
• (optional) flash Gapps (no auto toggle needed)
• (optional) flash Magisk (no auto toggle needed)
• (optional) flash DFE
• format
• boot system

DIRTY

• skip format

====================
11-02-2023
====================

* hotfix: make CTS/Play Integrity pass again
* kernel upstreamed to 4.19.272 InfiniR v2.45
* synced with latest sources
* updated translations
* some other fixes and improvements

crDroid.net - Blog

official crDroid ROM website

crdroid.net

TEAM :
@raystef66
@immi803
Artur 'who's parents couldn't afford the extra H'
@AKASHPAUL aka "why not just ask Google, right?!"


InfiniR Alioth : https://github.com/raystef66/InfiniR_kernel_alioth (based on Optimus Drunk)

YT installation vid CR8 :

thnx @munchy_cool

 

[Tomek0000]

3 words about correct firmawre.
I used crdroid 8.6 and installed firmware 13.0.9. The observation is from Diablo Immortal. The time of loading new world map increased and was longer about 8-10 second. I upgraded crdroid to 8.13 without touching firmware and time of loading map was 2-3 seconds longer. I downgraded firmware to 13.0.3 and time of loading map is no longer than standard.
(I use twrp-3.7.0_12-v7.2_A12-alioth-skkk.img and NikGapps-basic-arm64-12.1-20230201-signed.zip ).

I have to add info about energy consumption during screen off. Crdroid 8.6 needed 1.5%/h, 8.13 needs 0.3%/h .

 

[D++]

Just bought an Poco F3 and installed this awesome ROM. Realy good. No problems so far.
Just a little heads up for anyone that wants to use microg.
Do not install the apk or the app from f-droid.
Install minimal minmicrog with twrp first. After that install newest gms core apk manually. In microg selfcheck, check all boxes that are possible. Go to settings - Apps - micorg gms core and enable data. Also enable receive SMS permission in the Android settings, couldn't get it to work in the selfcheck before.
Go back to microg app. Selfcheck. Enable GPS on your phone. Tik the last remaing box in selfcheck.
Enable device registration and cloud messaging in microg settings.
Reboot. Go to settings - battery and disable all battery saving options for gms core, framework and fake store.

Cost me a few hours to figure this out. Hope this helps someone.

 

[Sooperphone]

edit: wrong thread

 

[D++]

Does burn in protection work without smart pixels enabled (because setting is located under smart pixels)?
And does burn in protection also work on AOD?

 

[Techguy777]

FLASHING TIME
NEW crDroid BUILD 11.02.2023
DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING

crDroid statistics

crDroid TG Group

SELINUX ENFORCING ​

crDroidAndroid-12.1-20230211-alioth-v8.13.zip


NOTE :

• gappless build
• Gapps Basic recommended + your choice of addons
• Safetynet Pass out of the box (magisk hide)
• Remember to use the recommended fw
• Join our Telegram crDroid Poco F3 group

CLEAN FLASH MANDATORY if coming from 8.2 !!

• make use of recommended TWRP
• boot recovery
• flash Firmware v13.0.3.0.SKHEUXM or V13.0.3.0.SKHMIXM (recommended)
• flash crDroid (toggle auto flash twrp)
• reboot recovery
• (optional) flash Gapps (no auto toggle needed)
• (optional) flash Magisk (no auto toggle needed)
• (optional) flash DFE
• format
• boot system

DIRTY

• skip format

====================
11-02-2023
====================

* hotfix: make CTS/Play Integrity pass again
* kernel upstreamed to 4.19.272 InfiniR v2.45
* synced with latest sources
* updated translations
* some other fixes and improvements

crDroid.net - Blog

official crDroid ROM website

crdroid.net

TEAM :
@raystef66
@immi803
Artur 'who's parents couldn't afford the extra H'
@AKASHPAUL aka "why not just ask Google, right?!"


InfiniR Alioth : https://github.com/raystef66/InfiniR_kernel_alioth (based on Optimus Drunk)

YT installation vid CR8 :

thnx @munchy_cool

Curious do you plan on making android 12 rom also work with pixel launcher like on android 13?

 

[ApexPrime]

Does burn in protection work without smart pixels enabled (because setting is located under smart pixels)?
And does burn in protection also work on AOD?

It works like this:

 

[raystef66]

FLASHING TIME
NEW crDroid BUILD 23.03.2023
DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING

crDroid statistics

crDroid TG Group

SELINUX ENFORCING ​

crDroidAndroid-12.1-20230323-alioth-v8.14.zip


NOTE :

• gappless build
• Gapps Basic recommended + your choice of addons
• Safetynet Pass out of the box (magisk hide)
• Remember to use the recommended fw
• Join our Telegram crDroid Poco F3 group

CLEAN FLASH MANDATORY if coming from 8.2 !!

• make use of recommended TWRP
• boot recovery
• flash Firmware v13.0.3.0.SKHEUXM or V13.0.3.0.SKHMIXM (recommended)
• flash crDroid (toggle auto flash twrp)
• reboot recovery
• (optional) flash Gapps (no auto toggle needed)
• (optional) flash Magisk (no auto toggle needed)
• (optional) flash DFE
• format
• boot system

DIRTY

• skip format

====================
23-03-2023
====================

* updated to crDroid 8.14 code
* updated to sec. patch level 2023.03.05
* kernel upstreamed to 4.19.279 InfiniR v2.52
* synced with latest sources
* updated translations
* some other fixes and improvements

crDroid.net - Blog

official crDroid ROM website

crdroid.net

TEAM :
@raystef66
@immi803
Artur 'who's parents couldn't afford the extra H'
@AKASHPAUL aka "why not just ask Google, right?!"


InfiniR Alioth : https://github.com/raystef66/InfiniR_kernel_alioth (based on Optimus Drunk)

YT installation vid CR8 :

thnx @munchy_cool

 

[4Style]

Thank you very much for keeping this ROM up to date.
I would upgrade to crDroid 9, but I am waiting until OTA updates arrive there.

 

[iceman0826]

Coming from Clean install, CTS profile match is still flagged as "Fail" - using the latest Magisk Delta. Anyone had similar issue?

Update: was able to resolve this by following this workaround: >>

CTS profile match failed

Hi there. I have an unrooted realme 6 pro. 2 days ago I tried to use Google pay and it did not work. It said that "You can´t pay contactless using this device. It may be rooted or running uncertified software. I went to google play and I saw...

forum.xda-developers.com

 

[j2002]

Gesture navigation does not work on the latest build. Only back gesture works, the last app gesture (long back gesture) doesn't, and also the recent app gesture ("long" home swipe) doesn't work. Also, the recents app screen doesn't even open up, keeps reporting Pixel Launcher crash.

Is maybe the fact that I dirty flashed from CrDroid 7.12 the source of the problem? Should I do a clean install to achieve optimal performance?

Exactly the same happens to my Pixel today

 

[CharlieMHz]

I remember on build 13.09.2022 that I was able to tap on each 2-hour segment to see the individual usages, but after upgrading to 11.02.2023, I'm unable to tap on them anymore. When was it changed?