If you have any solution feel free to tell. Still have the same issue unfortunately. Cheersits good that wifi isnt affected, that way we know that the EFS isnt damaged
can you try deleting your APN and introducing it again?
it worked for me a couple of years ago with other phone
use twrp
can i get your dfe?Updated to the latest version with gapps, magisk and dfe in all of 5 minutes. Everything running perfectly, as usual. Thx dev for this great work.
That's the DFE I use. Downloaded it from xda from another thread, but didn't bother to search for it, so there's a file.
Hello friend. Is it necessary to flash this kernel after rom installation? Will this fix the bluetooth audio high latency problem on this rom?
TRy install firmware firstI installed the 13.05 update. I started recovery, installed the update, restarted in recovery, installed gapps + addons gapps, installed magisk, started the system, the loading starts but after several minutes it does not start. What am I doing wrong?
This kernel comes with the ROM. I guess if they update the kernel before a new ROM release then you can happily flash it.Hello friend. Is it necessary to flash this kernel after rom installation? Will this fix the bluetooth audio high latency problem on this rom?
All these updates! Keep up the hard work!FLASHING TIME
NEW crDroid BUILD 17.05.2022
DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING
crDroid statistics
crDroid TG Group
SELINUX ENFORCING
crDroidAndroid-12.1-20220517-alioth-v8.5.zip
NOTE :
- gappless build
- Gapps Basic recommended + your choice of addons
- Safetynet Pass out of the box (magisk hide)
- Flash min LATEST FW V12.5.3
- Join our Telegram crDroid Poco F3 group
CLEAN FLASH MANDATORY if coming from 8.2 !!
DIRTY
- make use of latest 3.6.0_11-RedmiK40_v3.4_A12-alioth-skkk_1f13aec4.img (check HERE)
- boot recovery
- flash Firmware (minimum requirement 12.5.3) (skip if you are on 12.5.3 or later) - v13.0.3.0.SKHEUXM or v13.0.2.0.SKHMIXM can be used as well
- can be used as well
- flash crDroid (toggle auto flash twrp)
- reboot recovery
- (optional) flash Gapps (no auto toggle needed)
- (optional) flash Magisk (no auto toggle needed)
- (optional) flash DFE
- format
- boot system
====================
- skip format
17-05-2022
====================
* kernel upstreamed to 4.19.243 InfiniR v2.18
* update blobs from miui_ALIOTHGlobal_V13.0.3.0.SKHMIXM
* vendor sec patch level 2022.04.01
* synced with latest sources
* updated translations
* some other fixes and improvements
TEAM :
@raystef66
@immi803
Artur 'who's parents couldn't afford the extra H'
@AKASHPAUL aka "why not just ask Google, right?!"
InfiniR Alioth : https://github.com/raystef66/InfiniR_kernel_alioth (based on Optimus Drunk)
YT installation vid CR8 :thnx @munchy_cool
Can I use V13.0.5.0.SKHCNXM firmware?FLASHING TIME
NEW crDroid BUILD 17.05.2022
DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING
crDroid statistics
crDroid TG Group
SELINUX ENFORCING
crDroidAndroid-12.1-20220517-alioth-v8.5.zip
NOTE :
- gappless build
- Gapps Basic recommended + your choice of addons
- Safetynet Pass out of the box (magisk hide)
- Flash min LATEST FW V12.5.3
- Join our Telegram crDroid Poco F3 group
CLEAN FLASH MANDATORY if coming from 8.2 !!
DIRTY
- make use of latest 3.6.0_11-RedmiK40_v3.4_A12-alioth-skkk_1f13aec4.img (check HERE)
- boot recovery
- flash Firmware (minimum requirement 12.5.3) (skip if you are on 12.5.3 or later) - v13.0.3.0.SKHEUXM or v13.0.2.0.SKHMIXM can be used as well
- can be used as well
- flash crDroid (toggle auto flash twrp)
- reboot recovery
- (optional) flash Gapps (no auto toggle needed)
- (optional) flash Magisk (no auto toggle needed)
- (optional) flash DFE
- format
- boot system
====================
- skip format
17-05-2022
====================
* kernel upstreamed to 4.19.243 InfiniR v2.18
* update blobs from miui_ALIOTHGlobal_V13.0.3.0.SKHMIXM
* vendor sec patch level 2022.04.01
* synced with latest sources
* updated translations
* some other fixes and improvements
TEAM :
@raystef66
@immi803
Artur 'who's parents couldn't afford the extra H'
@AKASHPAUL aka "why not just ask Google, right?!"
InfiniR Alioth : https://github.com/raystef66/InfiniR_kernel_alioth (based on Optimus Drunk)
YT installation vid CR8 :thnx @munchy_cool
keep on going, devFLASHING TIME
NEW crDroid BUILD 17.05.2022
DON'T JUST HIT & RUN .... YOUR APPRECIATION KEEPS MY MOTIVATION ROLLING
crDroid statistics
crDroid TG Group
SELINUX ENFORCING
crDroidAndroid-12.1-20220517-alioth-v8.5.zip
NOTE :
- gappless build
- Gapps Basic recommended + your choice of addons
- Safetynet Pass out of the box (magisk hide)
- Flash min LATEST FW V12.5.3
- Join our Telegram crDroid Poco F3 group
CLEAN FLASH MANDATORY if coming from 8.2 !!
DIRTY
- make use of latest 3.6.0_11-RedmiK40_v3.4_A12-alioth-skkk_1f13aec4.img (check HERE)
- boot recovery
- flash Firmware (minimum requirement 12.5.3) (skip if you are on 12.5.3 or later) - v13.0.3.0.SKHEUXM or v13.0.2.0.SKHMIXM can be used as well
- can be used as well
- flash crDroid (toggle auto flash twrp)
- reboot recovery
- (optional) flash Gapps (no auto toggle needed)
- (optional) flash Magisk (no auto toggle needed)
- (optional) flash DFE
- format
- boot system
====================
- skip format
17-05-2022
====================
* kernel upstreamed to 4.19.243 InfiniR v2.18
* update blobs from miui_ALIOTHGlobal_V13.0.3.0.SKHMIXM
* vendor sec patch level 2022.04.01
* synced with latest sources
* updated translations
* some other fixes and improvements
TEAM :
@raystef66
@immi803
Artur 'who's parents couldn't afford the extra H'
@AKASHPAUL aka "why not just ask Google, right?!"
InfiniR Alioth : https://github.com/raystef66/InfiniR_kernel_alioth (based on Optimus Drunk)
YT installation vid CR8 :thnx @munchy_cool
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned