Development [ROM][12.1][OFFICIAL] PixelOS [AOSP][STABLE][12/07/2022]

Did you like this project?

  • Yes

  • No

Results are only viewable after voting.
Search This thread
May 12, 2021
Which firmware should i flash if im on latest eekly build i.e. 22.6.15
U should flash the latest firmware for ur device look it up on google if u have indian device u should flash v13.0.6 (firmware) i think. And if u can understand hindi i would suggest a video from tech office he gave full instructions on how to flash this rom.
use this link.

roirraW "edor" ehT

Forum Moderator
Staff member
<Moderator Note>: Thread cleaned. All - please don't respond to those who break our rules, only Report them.

Also, if a user brings drama from another resource such as Telegram or anywhere else, to XDA - we cannot concern ourselves with what goes on at any other site but XDA. If a user breaks the rules here, then Report it. If a user breaks rules somewhere else, then it has nothing to do with XDA.

Much appreciated,

@roirraW "edor" ehT
Last edited:
  • Like
Reactions: nondetect


Sep 17, 2018
I have the same error:
Error applying update: 7 (ErrorCode::kInstallDeviceOpenError)
E: Error in /sideload/ (status 1)
When trying to install by sideload but I can't do the leave the OTA for 1 hour as suggested because no OTA update appears, it tells me that there is no update.
I have checked and reinstalled the suggested firmware but the problem persists


Senior Member
Jan 9, 2018
I have the same error:
Error applying update: 7 (ErrorCode::kInstallDeviceOpenError)
E: Error in /sideload/ (status 1)
When trying to install by sideload but I can't do the leave the OTA for 1 hour as suggested because no OTA update appears, it tells me that there is no update.
I have checked and reinstalled the suggested firmware but the problem persists
check if adb fastboot tools are up to date


Senior Member
Jan 9, 2018
No, I wasn't. But it doesn't solve the problem either I have updated fastboot and same error.
My clean install steps...
1. I extracted boot.img with payload dumper and loaded it with fastboot.
2. I did Format data wipe in recovery mode and restarted into recovery mode.
3. I installed the latest fw build with adb sideload and rebooted into recovery mode again.
4. I installed the last build with adb sideload and rebooted


Sep 17, 2018
yes, clean install works fine for me. what we intended to do was there rar me to reinstall all my apps


Jan 27, 2016
Xiaomi 11 Lite 5g NE

So Ampere reports that the max current is 3000mA, which goes accordingly to the information on the charger itself. Voltage is always at around 4V. So, if I'm not mistaken, it's charging at 12W max which is nowhere near the peak of 33W.

Not sure what's happening here.

At 33% charge it starts off at just about 2000mA, goes up and down in the range of 1000mA-2500mA. It's definitely slower than on stock MIUI.

Last edited:


Jan 13, 2020
Im still experiencing random reboots and even full on crashes on the latest build. Did a clean flash when i installed it. The reboots are not so common anymore, but the phone can still crash when on the lockscreen or when checking notifications. Doing a hard-reset is the only way to get it to work again.


Mar 21, 2017
The latest update seems decent besides the occasional reboots like the user above pointed out.

I noticed however that the MIUI camera update made all of my GCam mods work poorly? All of my Gcam pictures now look like they have a weird softening+contrast boost added to them that wasn't there before. I'll be downgrading to 18th of July for the time being.

Thanks for the development so far, though. It's still impressive work.

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    I really like the one shot autobrightness feature, but if you're using AOD it often keeps the screen very illuminated unless you unlock it again to let it adapt to the current light conditions. Would it be possible to add an option to let it use the light sensor if the phone is locked?

    And when using AOD, and to save power, would it be possible to add an option to turn off screen automatically in low light conditions (for example when the phone is in the pocket).
    We got a fix for that weird brightness bump at night on white screens, it'll be fixed with next update. You can disable one shot auto brightness feature then.
    First, thank you for this fantastic ROM!

    Few bugs that I have found so far :
    1. Whatsapp web doesn't work in the mobile app. Mobile application doesn't allow you to open the camera scanner to scan the whatapp web QR code.
    2. Any app that allows you to login to the app via Fingerprint method doesn't register the fingerprint. The fingerprint registration screen comes for about 0.5 seconds, automatically vanishes and then the fingerprint registration / scanner doesn't work in the entire mobile even for lock / unlock phone. Reboot is the only option to make the fingerprint work for lock / unlock phone.
    I don't have any of these problems. In fact, I've been struggling to find anything wrong with this ROM but can't.
    If you still have them, try sideloading this kernel (attached). You can always dirty flash the latest build to go back to default kernel (just in case something goes wrong).
    not very often but reboots keep happening
    Is it just me or the recorder app is really not working on this rom?
  • 39

    PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, themed icons, google sans fonts, Monet color based system wide theming, boot animation), a fork of OG Pixel Experience with improvements on the top of it. Huge respect to Pixel Experience team for their work, thanks to them for making this ROM possible.
    In short a fully functional Pixel Experience with just the right amount of essentials.

    /* Your warranty is now void.
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.

    Improvements over PixelExperience

    Device Specific Issues:
    • So far, everything is working
    • Permissive SELinux

    Get the latest PixelOS Build for Xiaomi 11 Lite 5G NE Download
    Magisk (optional)
    PixelOS Recovery

    Note: GApps are included, don't flash separately.

    • Encryption is enabled by default
    • MIUICamera shipped by default (everything works).

    PixelOS Recovery is recommended.

    Flashing Instructions
    Clean flash (coming from a different ROM):

    • Reboot to bootloader (fastboot)
    • Connect phone to PC
    fastboot flash boot boot.img
    fastboot reboot recovery
    • Select Wipe data/factory reset & confirm
    • Go back and select Apply update from ADB
    adb sideload PixelOS*.zip
    • Flash latest firmware from the link above
    adb sideload fw_lisa*.zip
    • After installation complete, Reboot system.

    Dirty Flash (updating from previous PixelOS ROM):
    • Reboot to recovery
    • Apply update from ADB
    adb sideload PixelOS*.zip
    adb sideload fw_lisa*.zip (only if there's a firmware update)
    • After installation complete, Reboot system.

    Detailed Instructions

    Join our Telegram Group
    Buy me a Coffee
    UPI: [email protected]

    @SugaCRX @whyredFire

    Source Code
    Device Tree
    Kernel Tree

    ROM OS Version: Android 12.
    ROM Kernel: Linux 5.4.x
    Stable Release Date: 23 January 2022
    Latest Release Date: 12 July 2022
    PixelOS Update! (18/06/2022)

    Dirty flash works, just sideload or flash from sdcard.
    OTA Update pushed to users on previous beta and stable builds.

    Download MIUICamera for lisa:

    - Introduced XiaomiParts
    - Fixed 5GHz hotspot
    - Fixed WiFi Display
    - Cleaned up audio properties
    - Misc. changes

    • Applock is now stable (exposed in security settings)
    • Added support for per-app volume
    • Added an option to remove the screenshots and screenrecords limits for all applications
    • Fixed Media picker SystemUI crash
    • Fixed widgets crash on PixelLauncher
    • Fixed semi bold font on PixelLauncher
    • Switched to material-you animation for double tap to doze gesture
    • Added Data Switch QS Tile
    • Added delete action for screenshot and screenrecorder notifications
    • Fixed colors on DocumentsUI
    It's not modded in any sort, the sources used by PE or most other roms are open source and anyone can fork them and modify them according to their requirements, that's exactly what I did. This is not a GSI/ ported rom, it has been properly compiled from the sources.
    PixelOS Update! (13/05/2022)

    Dirty flash works, just sideload or flash from sdcard.
    OTA Update wasn't pushed due to some internal issues.

    - Updated display stack from LA.UM.9.14.r1-19300.01-LAHAINA.QSSI12.0
    - Added support for Dolby Vision
    - Updated adreno drivers to V615
    - Switched back to QTI Perf from libperfmgr
    - Updated media configs from MIUI 13.0.4 Global
    - Addressed a bunch of denials
    - Charging speed and temp management should be better now
    - Fixed fingerprint location indicator
    - Fine tuned autobrightness ramp rates
    - Imported few missing blobs
    - Enabled QCRIL radio power saving
    - More misc improvements
    - tl;dr better battery, performance and less heat

    - Merged May Security Patch
    - Added expanded volume panel
    - Added quick settings tile for Auto brightness
    - Updated the caffeine quick settings tile icon from AOSPA
    - Update package details to match S style
    - Fixed an issue where battery percentage would refresh while accessing app drawer on white theme
    - Miscellaneous changes and fixes

    Flashing instructions are in first post of the same thread.

    Recommended Gcams:
    > MTSL
    > Shamim
    PixelOS Pre-Release Build (31-05-22)

    Just a quick Pre-Release build before the new security arrives, we've managed to fix OTA and a few other major issues. You might find a few new features after digging in a little, I'll be writing full changelog for nerds with a proper release build (tldr; better battery life and stability).

    You can always dirty flash either via sideloading or sdcard, latest global stable firmware recommended. For users who're planning to clean flash, you can use previous build's stable recovery for flashing this build.
    You'll be able to dirty flash next release build over this once its out (probably after June security patch rollout).

    This build also includes the new variable refresh rate implementation from AOSPA by arter97, here's his explanation on how it works