[ROM][12.1][OnePlus6][OFFICIAL]Syberia Project

Search This thread

rajib1d

Member
Dec 2, 2014
32
13
pune
So after flashing the ROM it got stuck in the syberia TWRP splash screen. to solve this,
1. booted nebrassy twrp from fastboot 2. flashed Dualboot orangefox recovery 3. Flashed the rom 4. flashed Dualboot orangefox recovery again 5. Reboot to recovery 6. Flashed gapps 6. mission accomplished
The rom is butter smooth, need to check android auto, which was not working in the the last version
 

pankspoo

Account currently disabled
Jun 27, 2013
1,776
953
in front of ENCHILADA
So after flashing the ROM it got stuck in the syberia TWRP splash screen. to solve this,
1. booted nebrassy twrp from fastboot 2. flashed Dualboot orangefox recovery 3. Flashed the rom 4. flashed Dualboot orangefox recovery again 5. Reboot to recovery 6. Flashed gapps 6. mission accomplished
The rom is butter smooth, need to check android auto, which was not working in the the last version
Again boot back to twrp and see what's happening?
 

AasimAmor

Senior Member
Mar 30, 2014
156
79
Pune
Sony Xperia Z
OnePlus 7
Can anyone help me dirty flash on last build without formatting data?
I followed the instructions 3 pages back,but on OrangeFox recovery it says about partition selection,so i did not go ahead as i dont want to format data.
 
Last edited:

pankspoo

Account currently disabled
Jun 27, 2013
1,776
953
in front of ENCHILADA
X
Can anyone help me dirty flash on last build without formatting data?
I followed the instructions 3 pages back,but on OrangeFox recovery it says about partition selection,so i did go ahead as i dont want to format data.
TWRP need to be updgraded? All The mess done by that ROM has no relation only way to boot is clean format
Even after that alter TWRP will cause encryption issue
 

jonathanrajya3

Senior Member
Apr 25, 2017
133
17
OnePlus 6
Battery stats graph page is not working properly, it shows the last charged percentage as full charge regardless of what percentage it was
..also the headline font is getting reverted back to default after some time
 

syedtahir16

Senior Member
Nov 10, 2013
366
141
Anyone got encryption working on the latest build? I tried it and it just reboots. Nothing happens.
 

Psk.It

Senior Member
Mar 6, 2016
142
37
Anyone got encryption working on the latest build? I tried it and it just reboots. Nothing happens.
I heard something similar also for other devices
just wait for twrp that could mamagethe new Android encryption
The put adb command still works, just need a different drive to write on (no /sdcard)
 

ahmedall1

Member
Aug 1, 2015
18
0
Does any one have mic. Issues after last update?
The mic. Works for phone calls and Google assistant, but not for other things like voice typing or recording (either normal recording or on social media like WhatsApp)

Edit: disabling hey Google fixed it!
 
Last edited:

赛布罗斯

New member
Dec 5, 2016
1
0
OnePlus 3
OnePlus 6
Does anyone know this rom can recognizes the SD card in exfat format through OTG?
Every time I insert an SD card in exfat format, it prompts me that the SD card needs to be repaired, and then it is formatted as fat32
 

Xyberghost

Senior Member
Dec 30, 2016
114
15
25
Kolkata
OnePlus 6
the latest update is almost bug free the google photos fixed, ringtone crashing fix while changing, in applcation image changing works now and few more goddies have been added. thank you so much.
 

pankspoo

Account currently disabled
Jun 27, 2013
1,776
953
in front of ENCHILADA
So here is solution for twrp stuck at splash screen and rom not booting.
While first installation boot to twrp then install twrp in advance option and then go to wipe, select data partition then go to repair or change file system tab and then select change file system and change file. System to F2FS.
REBOOT TO RECOVERY AND FLASH REST PROCESS AS IT IS.
on f2fs rom. Didn't hav encryption for data partition and so twrp will not cause any issue because no encryption will be there for data in rom and in twrp itself.

So any twrp will work now
 

darksx

Senior Member
Dec 19, 2014
237
87
Hi. I don't like this ROM. How can I turn back to stock rom oos 11 or 10? Please answer me
Well i usually use fastboot stock Rom,it's a lot easier then MSM tool.you need working adb and fastboot on your PC and just one click.after that if you want you can lock your bootloader.good luck
 

Top Liked Posts

  • There are no posts matching your filters.
  • 12
    New build is up;)

    Changelog:


    Kernel:
    - Merged linux 4.9.311
    - Merged latest sdm845 CAF tag


    Rom:
    - Added Google QuickTap
    - Expanded volume panel
    - App Lock feature
    - Added back charging ripple animation
    - Allow disabling fingerprint wake-and-unlock
    - Allow to hide back gesture arrow
    - Launcher improvements:
    - Clear all button at bottom in recents screen​
    - Google lens integration in recents​
    - Icon Packs supports​
    - Google hotseat dock search​
    - Allow to hide app labels​
    - Allow to change icon/labels size​
    - Added Repainter integration
    - Other fixes and improvements under the hood

    Device:
    - Sync USB init scripts with LOS

    https://syberiaos.com/downloads#enchilada
    2
    Does it fix Mobile data bug..??
    Signal bars with exclamation ❗ symbol..??
    I have to reboot to fix it.. but in current build it is so often it is annoying..
    for me it is working without any problem - EU

    where is the option to hide back gesture arrow?

    System>Gestures, there is the option to hide it
    Hi,
    I just download and install syberia but my phone is brick now, can't boot to fastboot because it brings me to a loadscreen with the logo, can you help me ?
    had the same problem. turn off phone press volume up and power until you boot into fastboot, select recovery. It didnt boot into twrp, but the syberia recover. Click wipe option and press format data/factory reset. That fixed the stuck boot animation
    Hi, are you able to receive Gmail app notifications with the latest build ?
    works for me

    was looking for installation guide for this os and the description on first page got me a littl confused so here is one in case you are also from latest OOS11 locked bootloader

    1. unlock bootloader -> this will wipe your data (do a backup)
    2. flash twrp img and in twrp flash the zip
    3. wipe your data in twrp just in case if you didn't had to unlock bootloader
    4. flash syberia os
    5. do a factory reset/format data/wipe in twrp or the recovery from syberia os (my twrp was gone after the flash)
    6. enjoy

    so far i didnt had any problems, everything works smooth after i used the OS for a while. First start of apps were kinda slow.
    For me the Animationspeed for app launches were a little slow, i recommend to speed it up by adjusting the animation speed in the dev options.
    I set it for my preference to 0.5, but 0.7-0.8 should do the trick
    1
    I tried that, but the problem isnt with rom that I am experiencing as of now.

    I want my work profile set up through company intune, but while setting up work profile it is asking me to encrypt the data, which I cant do because, Syberia doesn't support encryption along with twrp (any rom for all that matters).

    It was encrypted just before I was flashing rom, in my stock OOS, but as soon as I flash a ROM, and try to wipe the data (by pressing yes) it was showing it is encrypted, hence I couldnt wipe it.

    So I used the default swipe( which clears data, and all the caches), and then the phone becomes decrypted, hence causing the problem of work profile.
    The one where you type "yes" is the one that straight up formats the block device, hence no encryption. That's only done on this ROM as A12 encryption support is finnicky at best on this device. If you need work profiles on your device, I would recommend grabbing an Anroid 11 ROM. My favorite was Pixel Experience, but LineageOS with OpenGApps also ought to do the trick, and that will give you Work Profile functionality along with /data encryption by default.

    Edit: Forgot to mention that TWRP actually does support A11 encryption, but not A12 encryption, which is why the ROM maintainer suggests decrypting /data to install it.
    1
    Pixel Experience and LineageOS both have encryption by default, unless you flashed the dm-verity disabler. In that case it will not. You'll need to MSM back to stock to re-enable encryption by default so that the DTB image has the original fstab inside, then flash either Pixel Experience or Lineage+OpenGApps. Either one of those will maintain force-encryption and allow you to use Work Profiles without issues.

    However, if you really don't want to go through redoing everything on the phone, you can also just do the /data format in TWRP, flash one of the mentioned ROMs, and use their built-in encryption menu to encrypt the phone as it will work with both TWRP and other ROMS, since it uses the device's default encryption key.

    Let me know if that works out for you, or if you need any help getting it going.
    1
    I flashed this rom about a 2 months ago, it's working like a charm, it made me appreciate this phone again, Thank you so much.

    I'm still on 5.2 I want to update to the latest version to get the new version but I'm afraid I may screw up something I don't want to risk since the phone is working perfectly right now.

    I tried to follow the update instructions but once I reboot into recovery I only get the built in one not TWRP. is there something wrong and what's the best approach to update the rom?

    Thank you.
  • 44
    d7Wdalb.png

    Code:
    /*
    * Your warranty is now void.
    *
    * Syberia Team not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications.
    */

    Read the whole OP! Be respectful to each other and don't ask for ETAs, it's considered as being rude!

    Vv4txnQ.png


    Syberia Project (aka Syberia OS) is a custom ROM for OnePlus 6 that implements various features. This project was designed by our "Syberia Team" from

    scratch based on AOSP source code with some CAF fixes and improvements. Our team: @DennySPB, @blinoff82, @alexxxdev. Also many thanks to our designers @rlshukhov and

    @a18h for logos, wallpapers and bootanimations.


    If you like our work you can buy us a cup of coffee or a glass of beer :p
    Here



    VTh68ra.png


    Code:
    Monet
    VoLTE, VoWiFi
    LineageOS LiveDisplay
    MicroG support
    Pocket Judge
    Call recording
    Statusbar items switches
    Three finger swipe to screenshot
    Extended powermenu
    Scramble pin layout option
    Quick pin unlock option
    PowerOff torch on power button
    Volume rocker wakup option
    Volume key music controll
    More VoLTE/VoWifi statusbar icons
    Advanced gesture navigation options
    Lockscreen charging information
    DataSwitch tile
    Volume keys cursor control
    Statusbar clock/date customization
    Lockscreen visualizer
    Lockscreen media art toggle with blur options
    Statusbar battery styles
    Flipendo (extreme battery saver) tile
    Brightness slider in QS options
    Reboot QS tile
    Separate wifi/data QS tiles
    Caffein QS tile
    Sound tile
    Flash on call waiting option
    Network traffic monitor
    Battery/Notification LED lights customization
    NavBar inverse option
    ...Settings and features will be gradually added.


    8VyUQ4W.png



    SyberiaOS ROM Download

    Gapps Download (recommended)

    Magisk Alpha Download

    OOS 11 Firmware



    AvsSRoq.png


    First time clean installation:

    Code:
    - Unlocked bootloader is required
    - Download ROM.zip, latest OOS 11 firmware (optional: Gapps, Magisk) and put to internal memory
    - Boot into TWRP
    - Once twrp booted go to "Install" -> choose ROM.zip
    - Reboot -> recovery
    - Go to "Install" -> choose OOS firmware.zip, Gapps.zip (optional Magisk, Gapps-Addons etc.)
    - Go to "Wipe" -> Swipe for factory reset, then Format data (via "yes")
    - Reboot -> System
    - Enjoy.

    Updating:
    Code:
    - Reboot into TWRP
    - Go to "Install" -> choose ROM.zip
    - Reboot -> recovery
    - Go to "Install" -> choose Gapps.zip (optional Magisk, Gapps-Addons etc.)
    - Reboot -> System

    MWeyPL0.png


    Code:
    Encryption may not work

    Attention! We are not responsible for the operability of your device if you use third-party kernel, Xposed Framework or unverified Magisk modules.



    P3ukkeP.png


    Official website
    Syberia Project Github
    Syberia Project Gerrit
    Syberia Project Kernel Source



    5J6Exi9.png

    Code:
    - LineageOS
    - AOSPA (aka Paranoid Android)
    - Nitrogen Project
    - Benzo Rom


    kuOCxRH.png
    5eed45a34065.png
    5d34ad031c21.png
    3bdad8153531.png
    1249fcb5df83.png
    64059eb502bd.png
    20
    New build is up;)

    Changelog:



    Kernel:
    - Merged linux upstream
    - Merged CAF LA.UM.10.3.r1-00300-sdm845.0 tag
    - Pulled some RT scheduler changes from Pixel6 kernel

    ROM:
    - Improved Monet
    - Monet finetuning options
    - Scramble pin layout option
    - Quick pin unlock option
    - PowerOff torch on power button
    - Volume rocker wakup option
    - Volume key music controll
    - More VoLTE/VoWifi statusbar icons
    - Advanced gesture navigation options
    - Lockscreen charging information
    - DataSwitch tile
    - Volume keys cursor control
    - Statusbar clock/date customization
    - Lockscreen visualizer
    - Lockscreen media art toggle with blur options
    - Statusbar battery styles
    - Flipendo (extreme battery saver) tile
    - Brightness slider in QS options
    - Reboot QS tile
    - Bring back separate wifi/data QS tiles
    - Caffein QS tile
    - Sound tile
    - Flash on call waiting option
    - Network traffic monitor
    - Battery/Notification LED lights customization
    - NavBar inverse option
    - Other fixes and improvements under the hood

    Device:
    - SELinux: Enforcing
    - Switch to QTI Bluetooth
    - Swtich to own TWRP 3.6.0-11
    - Powerhints updated from Pixel6


    [Mod Edit] Link removed
    14
    Works:
    - Everything

    Known bugs:
    - A2DP offload
    - Selinux: permissive

    Download link:

    [Mod Edit] Link removed
    14
    This is the sequence that I have used, and I have gotten it to start:
    1 Orangefox recovery: disabled dm varity and forced encryption, reboot to recovery
    2 Flash syberian 12 and orangefox recovery (marking the same options) and reboot to recovery
    3 flash fw_op6.zip, flash gapps and magisk
    4 format data
    5 Reboot and enjoy android 12
    13
    New build is up;)

    Changelog:



    Kernel:
    - Merged linux 4.9.297
    - Further scheduler improvements

    ROM:
    - January security patch android-12.0.0_r27
    - Add Gaming mode
    - Add support for gmscompat
    - Add increasing ring feature
    - Add switch for linked ring and media notification
    - Add require unlocking to use Internet quick tile
    - Add ringtone settings for Multi SIM devices
    - Add Cloudflare DNS as the default fallback
    - Add colors to assistant animation
    - Add volume panel on left toggle
    - Add small keyguard clock switch
    - Add custom lockscreen clocks
    - Add lockscreen clock options
    - Add pixel charger animation
    - Add screen off animations
    - Fixes for camera and audio stream
    - SystemUI fixes and improvements
    - Art and bionic improvements
    - Fix landscape battery size
    - Other fixes under the hood

    Device:
    - Stock AOSP recovery instead of prebuilt TWRP
    - PowerHints tuning
    - Disabled force encryption for EXT4 data partition


    [Mod Edit] Link removed

    PS. Please note: encryption is not working properly and cause some bugs like stuttering audio when screen is off and more....