Hey can anyone guide me with easy steps for install this rom . I'm new to this line and noob at changing rom . I need easy and clear instructions .
Thanks in advance
Well, even if you tell you are a noob, there is infinite levels of noobness one can really be. I just did it yesterday so I have it fresh on my head.
Here is my guide assuming you are kind of a somewhat streetwise noob. (Sorry, don`t have the talent nor patience to do it for a complete noob).
1. Download
- The latest stable firmware for your device (mine is a CN device, yours may differ): fw_raphael_miui_RAPHAEL_V12.5.6.0.RFKCNXM_f5fe3b4a6f_11.0.zip
- The latest TWRP: twrp-3.6.1_9-0-raphael.img
- Magisk-v25.1.apk (and rename it to Magisk-v25.1.zip)
- ANXCameraUnity_185R.SaltyIntelligentPlainsqueaker.zip (if you don`t like ANX, just skip it)
- 1OSS.DFE.zip
- The ROM: PixelExtended_raphael-12.1-20220610-1454-OFFICIAL.zip (obviously)
2. Disable any screen lock you may have. Certify that your google account info and any data on the phone is backed/synched up.
3. Boot on fastboot (turn off the device, and turn on again while pressing volume -)
4. Plug the phone on the computer (one with Fastboot and ADB installed on it)
5. Rename the twrp file to twrp.img for simplicity sake.
6. On the computer run these commands:
- fastboot flash recovery twrp.img (should flash the damn twrp to recovery... but on my phone it doesn`t ever stick ffs)
- fastboot boot twrp.img
7. If all goes well, the phone will boot into TWRP recovery.
8. Do a wipe
9. Format Data
10. Reboot... and try to enter Recovery by pressing Power and Vol +. If it doesn`t work, simply repeat steps 3 to 7
11. Go to Advanced and Choose ADB Sideload. Check both wipe boxes and swipe right.
12. On the computer run these command:
- adb sideload fw_raphael_miui_RAPHAEL_V12.5.6.0.RFKCNXM_f5fe3b4a6f_11.0.zip
13. Once finished, go back to the ADB Sideload page and select it again.
14. Repeat the sideload sequence as in steps 11 to 13 for those files:
- PixelExtended_raphael-12.1-20220610-1454-OFFICIAL.zip
- Magisk-v25.1.zip
- ANXCameraUnity_185R.SaltyIntelligentPlainsqueaker.zip
- 1OSS.DFE.zip
15. After finishing, DFE will need you to do some steps to configure buttons (to be able to answer some questions). After that it will ask if you want to disable cota (answer no) and if you want to force disable encryption (answer yes)
15. Format Data once again
16. Reboot.
I hope it is clear enough, as it is.
Some people might do it differently... but those steps netted a complete success on the first try in my case.